Used bale presses for sale (187)

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a Kdsdpfx Amoxbgnhj Eek bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Kdsdpeu Thh Esfx Am Eok Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1994, operating hours: 21,900 h, functionality: fully functional, Baler Avermann, Type AVOS 1411 – 37/60, Pressing force 60 t, Year of manufacture 1994, good condition, with conveyor belt Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Kedpfsyhcybox Am Eodk Operating hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Throughput rate (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The baler is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of supply. Please note: All technical data are based on the manufacturer's information. We assume no liability for the specifications provided or for any potential errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Viewing is possible by prior arrangement. The sale is ex works, subject to advance payment, with no warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: Kedpoygk H Tsfx Am Eodk All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: refurbished (used), functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Kedjxl Rqbjpfx Am Eodk Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 390002114, pressing force: 12 t, Baler HSM V-Press 610 – Year of Manufacture 2013 – 120 kN Pressing Force Sale exclusively B2B (business to business) For sale is a fully functional vertical baler HSM V-Press 610 in well-maintained used condition. Ideal for trade, industry, logistics, or waste management companies to reduce the volume of cardboard and film materials. 🔧 Technical Specifications • Manufacturer: HSM • Model: V-Press 610 • Year: 2013 • Pressing force: 120 kN • Connection: 3~400 Volt / 50 Hz • Power: 3.0 kW • Rated current: 6.5 A • Machine number: 6110.134 • Serial number: 390002114 Features & Equipment • Electronic control with display • Automatic compaction cycle • Mechanical door locking with safety interlock • Bale strapping with plastic tape (reel holder included) • Emergency stop switch • Heavy-duty industrial design "Made in Germany" • GS-certified 📦 Suitable for • Cardboard • Mixed paper • Film (plastic wrap) Efficient volume reduction for lower disposal costs. 📍 Condition • Used, fully operational • Normal signs of wear (see pictures) • Regularly serviced • Inspection tags present Ksdpoynwqzofx Am Esdk Viewing by appointment possible. 💶 Terms of Sale • Sale exclusively to commercial customers • Sale excludes any warranty and guarantee • Collection by buyer • Loading can be arranged by agreement

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Kdedpfxjyf Eh Ao Am Eok Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film The baler is in good, fully functional condition and has been inspected and tested by us. The video can be found on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We accept no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, year of last overhaul: 2026, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Kdodpfx Amsyyi Svj Eok We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Kdsdow E Htuepfx Am Esk Machine decommissioned

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 370 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750 Kdedpeyx Am Djfx Am Ejk

Condition: ready for operation (used), functionality: fully functional, pressing force: 38 t, MPC 20 PE compactor container Kdodpfxjyiltqs Am Esk

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Kdedpjx Dnb Uefx Am Esk Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Dixi 60 SLD Baler, Year of Manufacture 2015 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of Manufacture: 2015 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (WxL) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (WxHxL) Bale Weight: approx. 370–410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine Weight: approx. 5,420 kg Kdjdoyba Amspfx Am Ejk Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspections, including under power, are possible at any time by arrangement. On request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00, and on Fridays from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's information. We accept no liability for the accuracy of the stated information or possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are available by appointment. Sale is on a prepayment basis, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baling Press Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Feed Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Ksdpfx Amjyba Age Eodk Viewings, including under power, are possible at any time by appointment. Upon request, we can also perform test runs with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 am to 2:00 pm. On Friday, we are available from 8:00 am to 1:00 pm. Please note: All technical data is based on the manufacturer's information. We accept no liability for any errors in the information provided. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Kjdpfx Aoybaz Ajm Esdk Year of manufacture: 2016 Operating hours: 1,030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: triple, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. You will find the video on our website or YouTube channel. The hydraulic hoses should be renewed. Inspections with power connection are possible at any time by appointment. On request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the information provided or for any errors. This offer is subject to change and prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is conducted on a prepayment basis, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baler Dixi 60 SLD, year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Kjdpoybaziefx Am Eedk Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or for possible errors. This offer is subject to change without notice, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: Kdsdpfxjybapao Am Esk All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. Kedpjybal Uefx Am Eodk If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2020, in very good condition Technical data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Press cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Binding: manual Transport dimensions: 1600 x 1300 x 2200 mm Kodpfxjybak Rj Am Ejdk Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, polystyrene, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Note: The machine is in very good, as-new condition. The seals on both cylinders for the retaining clamps have been replaced. The machine has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. Upon request, we also conduct tests with your material for a processing fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday between 8:00 am and 2:00 pm. On Fridays, we are available from 8:00 am to 1:00 pm. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Kdodox A U Ncepfx Am Esk Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Kedpovtpq Hofx Am Eedk Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: Kjdpfoyz Af Eex Am Eodk – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, Equipment: documentation/manual, DIXI 60 SLD horizontal press baler 2012 year of production Press checked by service / new hydraulic cylinder installed. Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Kdjdpfxsyw Hz Nj Am Esk Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Kodpfx Amoyqw Sqo Ejdk Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Kjdpfx Asw U Dt Nem Eedk Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.