Used Bale presses for sale (211)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Dusb Enanevwlqqe Aot Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2020, Austropressen AP 25 semi-automatic baler with lift-and-tilt device, built in 2020 Technical specifications: Manufacturer: Austropresse Dujb Enaowifi Njn Aot Type: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Baling: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: Paper, cardboard, foil, metals, foams, etc. Note: The baler is in very good condition. Complete documentation is included. Please note: All technical specifications refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and revocable at any time. Viewings are possible by appointment. The sale is ex works, subject to advance payment, without warranty or guarantee.

Condition: good (used), Metall baler type RETEC for sale. Dujb Enaewf Dbcen Ajt It is suitable for soft metals like aluminium. The baler makes cubes from aluminium that are 30x30x35 cm and weigh about 26-28 kg It can produce about 45-46 cubes per hour, so it makes about 1 ton per hour.

Condition: ready for operation (used), Year of construction: 2012, Looking for a good second-hand used machine? Then take a look at the offer of FLITS Rental & Sales. Dsbowgab Ue Enan Aeut Brand: DIXI Type: 60 S Year of construction: 2012 Pressing pressure: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions filling opening: 115 cm x 80 cm deep x 55 cm high Condition: very good! Checked for operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Do you need more bundles of binding wire? Then request a free quote. FLITS Rental & Sales is your reliable partner in the sale and rental of high-quality machines for both companies and individuals. We focus on providing efficient solutions in the field of internal transport, cleaning, waste processing and working at heights. At FLITS Rental & Sales you will find an extensive range of machines that can be used in various sectors. Also look at our advertisements for: waste presses for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubbing machines for thorough and professional cleaning of floors, forklifts in various models, suitable for various working environments. At FLITS Rental & Sales you choose speed, clarity and reliability. We think along with you, respond immediately and ensure that you quickly have the right machine. You are more than welcome to come and view the machines on location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have all the time to inform you well and show you the right machines. Do you have any questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you!   Waste press Paper press Cardboard press Plastic press Waste compactor Recycling Textile press Waste Waste processing DIXI

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, pressing force: 90 t, bale weight: 500 kg, filling opening width: 926 mm, filling opening length: 1,620 mm, bale length: 1,300 mm, total height: 1,100 mm, total length: 720 mm, input voltage: 400 V, overall weight: 25,000 kg, noise level: 85 dB, pressure: 280 bar, power: 55 kW (74.78 HP), input frequency: 50 Hz, Refurbished BOA baler type 2100 including BOA conveyor belt. Machine is quickly available and is currently in our production hall in Almelo. The machine is very suitable for pressing paper, plastic or other waste materials. Technical data BOA 2100: Drive: 55 kW Press force: 90 tons Cfg0U7Ih Bale dimensions: 1100 x 720 mm Bale weight: approx. 500 kg (depending on material) Number of tie-off wires: 4 vertical Technical data conveyor belt type 1500 KTH HS 32° 3000x8900: Horizontal length: 3,000 mm Dusb Enaevrzyqsn Aot Ramp section length: 8,900 mm Drive: 2.2 kW / 400 V / 50 Hz Belt width: 1,500 mm Effective width: 1,425 mm

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, pressing force: 30 t, Baler paper baler Bramidan Bramin B30 W, year of manufacture 2021, weight 1640 kg, for cardboard/plastic film/paper, motor 4 kw 400 volt, pressing force 30 tons, cycle time 43 sec, dimensions HxWxD 3350x2080x1270 mm, feed opening WxH 1525x560 mm, transport height 2350 mm, machine is equipped with Bra-In App, Ser.No.437524, very good condition Dujb Eeq Rt Ddonan Aot

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Djbevn Tg Io Enan Aeut Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2008, Functionality: fully functional, Klanke Baler, Type KBST-110880, Year of Manufacture: 2008 Dujbewhi Ute Enan Aot Technical Specifications: Manufacturer: Klanke Type: KBST-110880 Year of Manufacture: 2008 Pressing Force: 80 t Drive Power: 2 x 30 kW Total Connected Load: 75.5 kW Capacity: max. 225 cbm/h Bale Size: 1,050 x 760 mm, Variable Length Bale Weight: 400-500 kg Baling: 4-way horizontal, automatic Transport Dimensions: 8,585 x 2,210 x 2,800 mm (L x W x H) Weight: 17,000 kg Accessories: 8 wire reel holders, bale chute Materials: Paper, cardboard, film, big bags, PET Operating Instructions, Electrical and Electronic Equipment Hydraulic diagrams are available in German. Note: The press is in working order. A floor plate in the press box is cracked and needs to be replaced. We also recommend replacing the chain on the twister, the hydraulic hoses, and the oil filter. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. The sale is ex-works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2007, operating hours: 33,600 h, Functionality: fully functional, pressing force: 120 t, Technical data of the horizontal automatic press Model Bollegraaf HBC120 with feeding conveyor Manufacturer: Bollegraaf Recycling BV, Nederland Pressing force 120 t Pressing force per-press: 65 t Channel cross-section : 1100 x 720 mm Filling opening : 1100 mm x 1600mm Number of wires horizontal 3 pcs Number of wires vertikal 5pcs Drive power 90 kW Throughput T/hour T/Stunde • Density 15 kg/m3 8 t/hour • Density 30 kg/m3 16 t/hour • Density 50 kg/m3 25 t/hour • Density 80 kg/m3 37 t/hour Bale weight till /bis 1000kg Bale length adjustable Bale size (WxH) 1100 x 720 mm Press weight 36 tonn Press Dimensions: L x W x H 11740 x 2250 x 6854 mm Manufacture year 2007 Dobjv Snc Se Enan Ajut Operating hours: 33.548 hours - The press was maintained and serviced annually. - Press plate cover Hardox, neu Hardox - Neu Motor

Condition: ready for operation (used), Year of construction: 2009, Looking for a good second-hand used machine? Then take a look at the offer of FLITS Rental & Sales. Brand: HSM Type: V-press 860 PLUS Year of construction: 2009 Press pressure: 532 kN Voltage: 400 Max. bale weight: 430 kg (depending on the material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Fill opening dimensions: 120 cm x 65 cm x 85 cm Condition: very good! Checked for operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Do you need more bundles of binding wire? Then request a free quote. FLITS Rental & Sales is your reliable partner in the sale and rental of high-quality machines for both companies and individuals. We focus on providing efficient solutions in the field of internal transport, cleaning, waste processing and working at heights. At FLITS Rental & Sales you will find an extensive range of machines that can be used in various sectors. Also look at our advertisements for: waste presses for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubbing machines for thorough and professional cleaning of floors, forklifts in various models, suitable for various working environments. At FLITS Rental & Sales you choose speed, clarity and reliability. We think along with you, respond immediately and ensure that you quickly have the right machine. You are more than welcome to come and view the machines on location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have all the time to inform you well and show you the right machines. Dobswgaawj Enan Asut Do you have any questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you! Waste press Paper press Cardboard press Plastic press Waste compactor Recycling Textile press Waste Waste processing

Condition: reconditioned (used), Year of construction: 2005, Functionality: fully functional, pressing force: 90 t, bale weight: 600 kg, filling opening width: 1,620 mm, filling opening length: 972 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 31,000 kg, noise level: 85 dB, pressure: 300 bar, power: 175 kW (237.93 HP), BOA baler with double pre-press valves available in a fully overhauled condition. The machine is located in our workshop in Almelo and can be viewed by appointment. A matching conveyor belt (new) can be produced if necessary. The machine is equipped with a so-called refu-ram. This is perfect for pressing materials such as plastic bottles and/or shredded RDF. Technical data: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tie-off wires: 5 vertical Duob Enaov Ifagen Ast

Condition: used, Year of construction: 2014, pressing force: 122 t, overall weight: 40,000 kg, pressure: 315 bar, Machine has been used but is surplus and therefore for sale! Deb Enaewa N U Den Ajut

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, Functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 Dsb Enanju Thgzj Aout 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2008, operating hours: 38,800 h, Functionality: fully functional, Macpresse MAC 111 / 1 baler, pressing force 170 t, built in 2008 Technical specifications: Manufacturer: Macpresse International S.R.L., Milan, Italy Type: MAC 111 / 1 Year of manufacture: 2008 Operating hours: 38,751 as of March Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1,800 x 1,020 mm Press chamber volume: 2.7 m³ Bale size: 1,100 x 1,100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 39,000 kg Accessories: Hopper, turbulator Note: The press is expected to be in operation until May 16, 2025, and can be inspected in operation upon request. The conveyor belt shown in the photos is not included in the scope of delivery. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by arrangement. Sales against advance payment are ex works, without warranty or guarantee. Dujb Enaewgkfden Ajt

Condition: good (used), Year of construction: 2017, Roll compactor/press that compresses cardboard, film, paper trimmings, punched grids, etc. into rolls – used –: Price ex-works: only €2,250 (net)! Manufacturer: Welger Model: Roller Compactor Type: RV-641-A1-400V Year of Manufacture: 2017 Device / System No.: 3017-139 Item No.: 011641002 Length: 1490 mm Width: 900 mm Height: 1750 mm Weight: 540 kg Bale diameter up to 400 mm Bale length: 600 mm Bale weight, depending on bale material: up to 30 kg Balance, depending on bale material: 250 - 400 kg/m3 Performance/Throughput: up to 300 kg/h Feed speed: 0.36 m/s Binding material: 23 µm stretch film Roll diameter: 250 mm Film width: 580 - 600 mm Binding and bale ejection: Semi-automatic Pressing materials for the RV 641:  Cardboard  Punched grids Dusb Enaswani Tjn Aot  Paper edge trimming (strips and continuous)  Paper and film bags  PP film edge trimming  PE film (large-format)  Film strips  Clothing protection film (PP/PE film)  Plastic strapping bands  PP/PE fiber material  Insulation and nonwoven materials  Foam grids  Packaging foam  Aluminum foil/hop bags  Textile wadding  Gray cardboard (solid)  Tetrapak  Big bags Power supply: 3x400V/AC, 50/60Hz. 16A Control voltage: 24V Mobile and compact design Roller compactors easily compress bulky material into cylindrical bales in the smallest of spaces. Condition: good – very good Available: immediately Location: Braunschweig

Condition: good (used), Baler HSM V-Press 504 waste paper press Machine in perfect condition, like new. Machine purchased from a warehouse, unused. Description: -HSM TCS (TorsionControlSystem) for controlling the inclination of the press plate Modern microprocessor control with membrane keyboard and graphic text display Suitable for both cardboard and foil Automatic start of the pressing process after closing the door Massive pressure plate and extremely stable pressure plate guide To fill the press, the upper half of the door opens to the right Door lock with knee lever for quick and safe door opening Dsbjwh Nqbo Enan Asut Manual bale strapping with polyester tape Pressure force: 40 kN Specific pressure force: 11.2 N/cm2 Drive power: 1.1 kW Voltage frequency: 230V / 50Hz Idle cycle time: 27 sec. Press capacity at idle speed (theor.): 3.75 m3/h Fill level: 661 mm Width x height of filling opening: 700 x 470 mm Bale length x bale width x bale height: 700 x 500 x 600 mm Bale weight: 60 kg Width x depth x height: 1020 x 812 x 1922 mm Weight: 290 kg Related product line: V-Press Consumable type: strapping tape

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,400 h, Technical specifications of horizontal automatic Press Djb Eswb H Tgonan Aeut Model Konti 275 D Manufacturer: PAAL, Germany Press force: 75t Channel cross-section 75x110 cm. Feed opening 102x155 cm. Filling volume approx. 2.0 m3 Binding vertically 5 wires Drive power 37 kW Material throughput • Density 35 kg/m3 9.5 tonnes/hour. • Density 60 kg/m3 16.5 tonnes/hour. • Density 100 kg/m3 26 tonnes/hour. Bale weight from 500 to 750 kg. Adjustable bale length Bale size (WxH) 75 x 1100 mm Press weight 25 tonnes Press dimensions see brochure Year of manufacture 1997. Operating hours, approx. 40,000 hours

Condition: used, Year of construction: 2009, Mil-tek waste compactor 509HD 2495 x 1400 x 1040 RA2167 Type: 509 HD Year of manufacture: 2009 Condition: functionally tested, used optical: traces of use Height: 2495 mm Width: 1400 mm Depth: 1040 mm Pressure: 8500 kg at 8 bar Safety valve: 11 bar Dob Eeq Tq U Njnan Ajut Waste bale size: 875 x 1250 x 800 mm Automatic bale ejection Own weight: 925 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2000, operating hours: 32,169 h, Functionality: fully functional, pressing force: 60 t, bale weight: 750 kg, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology with personnel protection system, baling press, bale chute and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a Duob Eoviwdmenan Ast bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor with personnel protection system 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 1 bale chute 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2016, operating hours: 287 h, Functionality: fully functional, HSM baler, type HL 7009 Re, with lift-and-tilt device, built in 2016 Technical specifications: Manufacturer: HSM Type: HL 7009 Re Year of manufacture: 2016 Operating hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lift-and-tilt device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Baling: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard Slide Note: The machine is in very good condition. A new, original HSM main cylinder has been installed. The press was inspected and tested by us in 28816 Stuhr, Germany. The video can be found on our website or our YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your equipment for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Djbowff Aus Enan Asut Sales against advance payment are ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 1994, operating hours: 51,551 h, Functionality: fully functional, pressing force: 78 t, bale weight: 850 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 900 l, A complete baling system is for sale, consisting of a conveyor belt with feed hopper, the baling press with bale chute and wire pulling stations, without wire. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Type HBC 80 AF Year of construction 1994, overhauled by the manufacturer Bollegraaf 2003 Operating hours 51,551 hours, as of December 2024 Number of pressed bales 613,446 pieces, as of December 2024 Main press pressing force 78 tonnes Pre-press pressing force 45 tonnes Dimensions of feed chute 1,500 x 1,100 mm (l x w) Filling volume / pressing cycle 2.9 m³ Theoretical cycle time 22 seconds Throughput capacity under operating conditions 300 - 450 m³/hour Bale dimensions 1,100 x 720 mm (w x h), the length is variable Drive power 45 kW Connected load, total 60 kW Tying 5-fold vertical, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 10 tonnes/hour Bulk weight of 50 kg/cbm approx. 18 tonnes/hour Bulk weight of 100 kg/cbm approx. 30 tonnes/hour Throughput in whirling mode approx. 20 tonnes/hour Bale weights with a bale length of approx. 1.2 m approx. 550 - 850 kg Hydraulic oil tank capacity 900 litres SPS control manufacturer Schneider Electric Transport weight of baler approx. 24 tonnes Accessories: Conveyor belt with feed chute, bale chute and wire pulling stations Dusb Enajvf E Daon Aot Condition of the baler: The machine was completely overhauled by the manufacturer Bollegraaf in 2003 and later fitted with a new PLC control system from Schneider Electric. The baler was used to compress dried grass into bales. Despite its age, the entire system, including the conveyor belt, is in really good condition and has been regularly serviced. The system is still fully assembled, connected to the power supply and can be inspected during operation without the use of materials. Scope of delivery for the baler: Baling press with conveyor belt, feed hopper, wire drawing stations and bale chute. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2016, Dixi 80 SLD baler, with lift/tilt device, semi-automatic, built in 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, carton The operating instructions and EC Declaration of Conformity are available in German. Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above with the images, or on our website or YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Dob Enaswcnryen Ajut Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material Deb Enaju Thypen Asut SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2012, Strautmann Baler, Type Bale Tainer, Pressing Force 60 t, Year of Manufacture: 2012 Technical Specifications: Manufacturer: Strautmann Umwelttechnik Type: Bale Tainer Year of Manufacture: 2012 Operating Hours: 11,238 Pressing Force 60 t Total Power 20 kW, 400 V/50 Hz Filling Opening Height 2,032 mm Filling Opening Width 1,069 mm Bale Dimensions 1,100 x 1,100 x 700 mm (W x D x H), 3 Discs Bale Weight up to 400 kg (3 Discs) 4-Way Vertical Tying Machine Dimensions with Feeder: 6,572 x 2,056 x 2,756 mm (L x W x H) Weight Approx. 7,450 kg Dujb Enjv Umw Hsan Ajt Materials: Paper, cardboard, PET bottles, film Remarks: The press is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above with the pictures, or on our website or YouTube channel. Viewings, including live viewings, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Viewings are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Duob Ensu Thbxoan Aet Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.