Baler

Paal DOKON 500 H/S

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | | Maximum Feed Size | approx. 600–800 mm | | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | | Weight Range | 55 tons | Ijdpsxcg Spefx Ah Uetr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 1 used steam generator ----- Manufacturer: JUMAG Model: DG560 Output: 560 kg/h Max. thermal output: 400 kW Operating overpressure: 13 bar Test pressure: 23 bar Water content approx.: 75 l CE mark: CE 0036 Year of manufacture: 2013 Equipped with Weishaupt combined gas/oil burner WGL40N/1-A Version ZM 125-550 kW, oil consumption 10.5 – 46 kg/h, gas control section, Control cabinet with touch control, mounted on the boiler body. Eco, automatic blowdown. Itsdpfx Ahsw S Edkj Uor

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Isdpeua D Aljfx Ah Ustr Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Type: 36/H/MC Incl.: basic chasis and oil unit Itjdpfxjpn I H Tj Ah Uor

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Itedpeiuky Isfx Ah Usr

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments; Itedpfeg A Rhkox Ah Uor

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Itsdpovwlqqofx Ah Uer Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Iodpfx Aoic Rl Dsh Uetr Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495. Itjdpfxsh Nyfyo Ah Ujr

Condition: good (used), Year of construction: 2011, Strapping machine Mosca SONIX-MP / RO-M-Fusion, year of manufacture 2011, in good condition, immediately available. We also have other Mosca machines in stock. Itsdpfx Aovx Rgaeh Usr If interested, we are happy to provide information about additional machines available at our facility. You are welcome to inspect the machine at our site by prior appointment.