Used Beverage production for sale (914)

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Cobvmjr It Ste Ih Esgt

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Cobvor It Swsm Ih Esgt

Condition: used, Year of construction: 2007, Overview  The water treatment plant consist of an activated carbon filter, a UV treatment and a reverse osmosis system. Additionally it is combined with a SIP cleaning system. The unit was installed and designed in 2007 by PWT. Since then it has only been used a couple of times, in total less than 100 operating hours. The system is still installed, under power and can be demonstrated. Technical details  Capacity: Currently installed: 6,000 l/h Can be upgraded up to 20,000 l/h GEA plate heat exchanger Schärf u. Schall activated carbon filter WEDECO BX50 UV Reactor Integrated SIP system Cobvm Iotka Aish Eogt

Condition: used, Year of construction: 2004, Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder Cgjbvmothyqas Ih Ejt

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery  Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors Cgobvm Ihovm U Dls Eet

Condition: used, Year of construction: 2022, Overview This continously crate washer, type: Nowicki MPP-150P was built in 2022 in EU.  for washing E1, E2, E3 crates with a maximum size of 600 x 460 x 420 (length x width x height). Water heating system: steam Also suitable for the bowls and GN 1/1 containers. Stainless steel construction Width (adjustable) min. : 200 mm / min. height: 50 mm Closed water circulation with filter Automatic dosing pump High-pressure nozzles adjustable in angle Display Regulation and control of temperature up to +65 C  On/Off Pump Automatic/ Manual mode Setting time and date Nozzle pressure adjustment: up to 4.5 bar Service Mode Water-resistant, IP 67 Technical Details Capacity: max.150 crates/ hour Height: 1820mm Width: 1057mm Length: 2629mm Scope of delivery continously crate washer | Nowicki | MPP-150P | 2022 Cobvm Ihevnl T Hs Eogt

Condition: used, Year of construction: 2008, Overview This cup filling machine was built in 2008 by the German manufacturer Ampack. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details Output: approx. 8,000 cups/hour Dosing units (servo-controlled): Pre-doser: 20 -250 ml Main doser: (80)100 -600 ml Cerialiser (tbd): 5-60 grams Free dosing space Current format sets 4 - corner ZKB, 8 - corner ZKB, round ZKB Control system: Siemens S7 Weight: approx. 25 tonnes Further information, pictures, and videos of the machine on request. Cebvmovn Txwe Ih Eegt

Condition: used, Year of construction: 2016, Overview  This Braucraft Mexicana brewing system has three tanks with a capacity of 3,000 liters: mash tank, lauter tank and kettle/whirlpool tank. The system was designed for continuous operation and enables double brewing per day. It is currently stored professionally and can be viewed by appointment. Operation is via steam. Technical details  Wort capacity: 3,000 liters Tanks: Mash Lauter Boiler/whirlpool Additional tanks: HLT (Hot Liquor Tank): 6,000 liters usable capacity, steam-heated CLT (Cold Liquor Tank): 6,000 liters, laser-welded cooling jacket Pumps: 5 transfer pumps for HLT, CLT and brewing system operations Heat exchange: 1-stage plate heat exchanger (Thermowave) Control: Analog control panel with Frequency converter for brewing system pump Frequency inverter for HVAC and CLT pumps Temperature measurement and control for HLT, boiler/whirlpool, mash and lauter Scope of delivery Platform Grain silo and grain hydrator 3 hp geared motors with built-in agitators and plows Mixing manifold and 1.5” jacket-insulated sanitary pipes with valves Cgobvm Ievt Srgsh Eet

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Cgobvjvmyuism Ih Est

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Cgjbvmjvptt Rs Ih Eot

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Cgsbvou Scr Sem Ih Ejt

Condition: used, Year of construction: 2014, Overview The water softener is a double unit with 2x3 bottles. The plant was manufactured in 2014 by the German manufacturer Grünbeck and is free because the owner invests in a new, larger plant. The plant is still in operation and can be inspected. Technical details Capacity: 2x 8 m3/h Softening from approx. 15°dH to approx. 3°dH with flow admixture Last maintenance: 21.3.2022 Incl. 2x salt tank à 210 l Cgebvmjl Hx Rae Ih Eot

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Cebsl Hx Rpevm Ih Eegt

Condition: used, Year of construction: 2008, Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Machine pitch 377 mm Diameter 360 mm Number of capping heads 3 Including feeder for the capping heads Cgebvm Iemrpv Doh Ejt

Condition: used, Year of construction: 2005, Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder Cgebvmem U R Dhs Ih Est

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Cgsbvmsn S A R So Ih Est

Condition: used, Year of construction: 2003, Overview This blow moulder was built in 2003 by French manufacturer Sidel. The machine is in very good condition and fully operational. It is still installed and can be viewed in person at any time. Techn. Details Capacity: 12,000 bph Number of molds: 8 Quick change for shell mold Bottle neck: PCO 28mm, 1881 (short-neck) Scope of delivery Blow moulder | SIDEL | SBO 8 Series 2 | 2003 Preform tipper Preform silo Elevator Unscrambler Slide Without molds and chiller Cgjbvetx Hkfom Ih Eot

Condition: used, Year of construction: 2012, Overview This traysealer, type: SEALPAC A4 was built in 2012 in Oldenburg / Germany. You can get started with fully automatic fresh produce packaging. Technical Details 2 formats Electrical connection: 220 V, 3 Ph, 50-60 Hz, 8 kW, weight: 1500 kg, total dimensions: 5500 mm x 850 mm x 2100 mm. Scope of delivery tray sealer | Sealpac | A4 | 2012   Cgjbvm Ihsty Ddlo Eot

Condition: used, Year of construction: 2013, Overview This ASP 600HDN flattener from the German manufacturer ALCO-FOOD-MACHINES/ JBT was built in 2013. Suitable for flattening and rolling out fresh and frozen meat (down to -4 ° C). Technical details Belt width: 600 mm Speed: 1.5...12 m/min Product thickness: 4 – 40 mm (adjustable) Working height: 1,020 mm +/- 75 mm Power supply: Power: 1 kW, 16 A Voltage: 400 V / 50 Hz 3 Phasen + N + PE Fresh water (adjustable): 0 -30 l/h Dimensions: Length: approx. 2,100 mm Width: approx. 750 mm Height: approx. 1400 mm +/- 75 mm Weight: approx. 300 kg Scope of delivery flattener | ALCO | ASP 600HDN | 2013 Cgobvm Ihjty Dd Ee Ejt

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Csbvmetz H T De Ih Ejgt

Condition: used, Year of construction: 2011, Overview This blow moulder was built in 2011 by French manufacturer SIDEL. The machine has been regularly serviced by SIDEL and is in a very good condition. The Sidel SBO 20 Universal Eco2 is still installed but not in production anymore.   Technical Details  Nominal capacity: 40,000 bph   Current capacity: 38,000 bph with different formats   Neck: 38 mm   20 standard quick change moulds (moulds are not included)   19,900 working hours  Scope of Delivery  Blow Moulder Sidel SBO20   Oven Sidel Universal Eco2   Preforms tipper Sidel EBHS 2050  Sidel hopper with cover  Preforms elevator and unscrambler  Preforms alimentation infeed rail   Pressco control preforms ovalisation   Sidel “banana” preforms controller,   Vulcanic water thermoregulator  Sidel PCC blower & Pressco PCC drive         Sidel electrical cabinet with A/C  Cebet Elb Ijvm Ih Eegt

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Cgebvmoqqz T Hj Ih Eot

Condition: used, Year of construction: 2004, Overview  The labeler was manufactured in 2004 by the German manufacturer Gernep. The last service was carried out in October 2021. Various label combinations can be realized with this machine. Including the application of wet glue and self-adhesive labels in combination on the bottles. The machine is sold without label monitoring. The machine is expected to be in operation until the end of 2024 and can be inspected at any time. Technical details  Output: approx. 6,000 bottles/h   Formats: 250ml, 750ml, 1,000ml  Right-left machine  2 wet glue stations  3 self-adhesive stations  12 bottle plates  Automatic machine. Lubrication  Bottle alignment unit  Cgsbeq N Tu Hevm Ih Ejt

Condition: used, Year of construction: 1999, Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000            Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Cjbverkgy Asm Ih Eegt

Condition: used, Year of construction: 2019, Overview    This cold glue labeler was manufactured in 2019 by the German manufacturer Gernep and used in a Belgian brewery. The machine was regularly maintained by OEM. The labeler was dismantled in summer 2024  Technical details  Capacity: 6,000 bottles/h    Formats: 330 ml, Neck (over the mechanical closure) and front label  Working direction: counter clockwise, r-l  Cgjbvm Ihouhthme Eet