Used Beverage production for sale (913)

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Ceb Eet Ul Exjulngjgt

Condition: used, Year of construction: 2005, Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available Csb Eulnsl Hxmpsgsgt

Condition: used, Year of construction: 2008, Overview This wrap-around cardboard packer was built in 2008 by Italian manufacturer SMI. The machine is still installed and can be viewed in person. Techn. Details Capacity: up to 45 packs per minute Recently packed: 3x4 cardboard, 0,75L glass bottles Other formats possible Working hours: 1,752 POSYC 3000 Touch panel Cob Eusrmfpvolngsgt

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Csb Eulerziuysngegt

Condition: used, Year of construction: 2007, Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps   Ceb Eujl Hx Awelngsgt

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Cgob Euol Uyfkslnget

Condition: used, Year of construction: 2017, Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customer's needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition there are several measurement devices for temperature, flow rate, filling level and conductivity Tech Specs: Base frame stainless steel Control: can be connected to Allen Bradley control CIP pumpcapacity: 20 m^3/h Tank volume: 500l Number of dosing pumps: four Measurement devices: Temperature Flow rate Filling level Conductivity Features: Suitable for the cleaning of fillers, flash pasteurisers, mixers, syrup rooms as well as piping systems and tanks P&ID can be modified Dosing pumps from Prominent CIP Pump: Hilge Hygia 50/50/5,5/2 Cob Eulsl Hxlyongegt

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Csb Euel Hxmhjlngsgt

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Cjb Eel Hxpkoulngegt

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Cgjb Eulnsl Hxprsget

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Cjb Eulerkgy Uongjgt

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000 Cgjb Eulnery Iiwjgst

Condition: used, Year of construction: 2019, Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg Cgob Eor A S E Heulngjt

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Cgsb Ejl Hx Enoulngjt

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Cgeb Eusl Hx E Sjlngot

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Cobol Hx Rde Eulngogt

Condition: used, Year of construction: 1997, Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line   Cgob Ejtqa Iqeulnget

Condition: used, Year of construction: 2015, Overview This can filling line was in operation in a brewery in UK until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line.  Technical data  Capacity: 24,000 cph (Filler can do more) Formats:   330 ml 440 ml  40 filling valves Single machines  Can Depalletizer | FIPAL | MINIDEPAL 20 LA | 2015 Infeed at the bottom Discharge on top Includes safety fences, can conveyors 2 Lane Empty Can Rinser | 2015 Can Filler | KHS | Innofill Can DVD 40 | 2015 Can Seamer | Ferrum | F6 | 2014 Can Lid Alimentation | CSW Deventer Holland | Mini-Multifeeder / 54 -MMF-01 | 2015 Can Inspection | Heuft | Spectrum TX | 2015 Can Dryer | Euro Sistemi | TF 01 | 2015 Can Dryer | Euro Sistemi | TF 02 | 2015 Wrap Around Case Packer | Robopac | Prasmatic TC400 compact  | 2022 can be converted to use tray & film Check Weigher | FT System | CP600 TP TUR300 Z200 RAS001 | 2017 Multi Packer | GPI | PQuikflex 300  | 2018 Date Coder | Hitachi | UX | - Ink jet coder Palletiser | FIPAL | Pal 80 F | 2015 Stretch Wrapper | Atlanta | Revolution LS | 2015   Cgjb Eotpv Twsulngst

Condition: used, Year of construction: 2004, Overview This linear oven, type: STORK THS 630/6000 was built in 2004. The unit is allready dismantled and on stock. The linear oven has two heating areas available that can be tempered differently at the same time. That’ll bring you maximum efficiency in food processing with minimized energy consumption. Technical Details electrically heated heating separately adjustable in two areas adjustable speed belt width ± 630 mm net cooking length : ± 6.000 mm overall dimensions (l x w x h) : ± 8.500 x 1.700 x 3.600 mm with belt wash system suitable for CIP-cleaning canopy with electric hoists suitable for steam injection (heating + product yield) Scope of delivery Linear oven | Stork/ Marel |THS 630/6000| 2004 Cgjb Euleumzn Hsngot

Condition: used, Year of construction: 2010, Overview    The brewhouse was built in 2010 by German manufacturer Kaspar Schulz and then expanded in 2014 with additional new equipment. The brewhouse has already been professionally dismantled and is immediately available. The full documentation and layouts are available upon request.   Technical details  Rash wort: 30 hl   Production capacity: Maximum 8 brews in 24 hours  Fully automatized (despite hop dosage)   Steam heated  Gentle-Boil method (SchoKo)   Scope of delivery  2 malt silos   4 roller mill | 800 kg/h   Brewhouse BRAUBLOCK 30 hl   Mash tun  Pre-flow vessel/ lauter tun  Wort kettle/ whirlpool  Hot water tank (HWT) 90 HL   Plate cooler  Wort aeration,   Spent grains pump  Cgjb Eeuzbb Rsulnget

Condition: used, Year of construction: 2022, Overview This brewhouse was manufactured in 2022 by Italian company Spadoni. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore, the brewhouse has not been used so far. Techn. Details Output: 25-30 hl in one brewing process Dimensions: 4.722mm x 4.401mm x 3.784mm  Brewhouse mounted on stainless steel frame 3 vessels  Mash tun Leuter tun Wort kettle + whirlpool Plate heat exchanger Scope of delivery Grist mill | Bühler AG | Smartgrist | 2022 Steam generator | ABC Perello | PMY - 12 | 2022 | 1900 m³, pressure: 7.8 bar  Water tank | Isma S.A. | 2022 | 50,000l | diameter: 3,000 mm, height: 7,400 mm  Hot water tank | agrovin | 2021 | 15.000 l   Cold water tank | agrovin | 2021 | 15.000 l  10 fermentation tanks | agrovin | 2021  7x 12.500l 3x 15.000l Water softener | 2022 Refrigeration pump | Taeevo Tech | TAE-381-P3 | 2022 Liquid dosing unit | Agrovin | Agatha PRO | 2021 Various pumps, gangway, stairs | 2022 Cob Eulneuzphrjgegt

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Ceb Eouzpiijulngsgt

Condition: used, Year of construction: 2009, Overview  This model 4300 DE-ST9 sleeve labeling machine was manufactured by FUJI SEAL EUROPE B.V. in 2009. Photos and an operational video are available, as well as the general layout of the line. Technical details  Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Last format: 0.25 liter  Cgjb Eulnsu Rwdyoget

Condition: used, Year of construction: 2019, Overview  This complete filling line for cans from Canadian manufacturer Cask was built in 2019. It has been well maintained with regular servicing and is in great condition. Tech. Details  Capacity: 40 cans per minute, 2400 cans per hour. Can formats 330ml 440ml Can end spec: 202 end spec Dimensions (Floor):  6m x 2m Inline scale and auto-reject Post Rinse and can blow off Can height spacer set Conveyor extension Rotary collection table Packleader ELF-50 labeller with stand Domino AX 150i Inkjet Printer Cask Automated Can Depaletiser  2 x Twist Rinser Electronic Manual Cjbju U D A Is Eulngjgt

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h beverage   6-component mixer  Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 measurement  CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz  Control voltage 42V AC  Cjb Eusvcp U Relngsgt