Used Beverage production for sale (918)

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. Together with this filler it comes a can seamer brand Lubeca and also manufactured in Germany. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 8,000 bottles / hour (depending on format) Formats: bottle 330 ml, 750 ml, can 330 ml, 440 ml Counter-pressure filler Running direction: left - right Can seamer Lubeca LW504 (2022) included Dcsb Ejt Rmhmo Ihf Tog

Condition: used, Year of construction: 2023, Overview  The Wild Goose Dual Lane EVO - EU 10 filling line is an automated can filling machine. The line features automatic lid placement, a CO₂ purge station and patented sealing and capping systems to reduce oxygen ingress.  Technical details  Output: 100 cans/min  Dimensions: 3317 mm length x 1041 mm width x 2769 mm height (height 2286 mm without lid tubes) Weight: approx. 635 kg Electrical power: Three-phase, 200V-240V, 18A at 208VAC, 50/60 Hz Compressed air requirement: Clean, dry compressed air at 6.2 bar and 650 l/min; requires air dryer and coalescence filter Lid placement: Automatic, with intelligent lid detection system Filling station: Automatic CO₂ flushing and filling Dsb E Ihfsu H R Nuj Tjcg

Condition: used, Year of construction: 2005, Overview This PET bottling line was used in a factory in Denmark. It was continuously used and maintained therefor the overall condition of the line is good. The line is in operating condition. Technical data Capacity: 12,800 bph at 2,0l Formats: Bottles: 0,5l 1,0l 1,5l 2,0l Cap: 28mm PCO 1881 Shrink only:6 pack for each botte format Pallet: Europallet and half pallet List of machines Blow moulder| KRONES | Contiform S8 | 2005 Preform kipper | KRONES | 2005 Preform alimentation and feeding | KRONES | 2005 Air conveyors | Krones | Airco | 2005 Rinser Filler Capper | Krones | Mecafill | 2005 Cap Alimentation | Gassner | 2005 Cap- Fill level inspection | KRONES | Checkmat 731 | 2005 Mixer | KRONES | MSF 24/2 | 2005 Flash Pasteurizer | KRONES | 2005 Labeller | KRONES | Multimodul with Contiroll station | 2005 Date coder | Inkjet | Excel 1701 | 2005 Bottle conveyors | Krones | Synco | 2005 Shrink Packer | KRONES | Variopac FS-30 | 2005 Date coder | Videojet | VJ1610 | 2009 Tray conveyors | KRONES| Multico | 2005 Handle applicator | Twinpack | MDE | 2007 Palletizer | KRONES | Pressant | 2005 Stretch Wrapper | Haloila | Octopus | 2005 Pallet labeller | Logopak | 920-II-PFRK | 2007 Pallet labeller | Logopak | VLP-210-II-F | 2008 Pallet conveyors | KRONES | Palco | 2005 Djbsuzphfs E Ihf Tocg

Condition: used, Year of construction: 2022, Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February)   Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours   Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h   Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January)   Manufacturer: Isma S.A. Machine Type: vertical water tank Model: --- YOM: 2022 (used since June) Capacity: 50,000 l   Manufacturer: Spadoni Machine Type: vertical insulated water tank (hot water) Model: --- YOM: 2021 (not used yet) Capacity: 15,000 l   Manufacturer: Spadoni Machine Type: vertical insulated water tank (cold water) Model: --- YOM: 2021 (not used yet) Capacity: 15,000 l   Manufacturer: Spadoni Machine Type: fermentation tanks Model: --- YOM: 2021 (not used yet) Capacity: 12,500 l x 7 (seven tanks included)   Manufacturer: Spadoni Machine Type: fermentation tanks Model: --- YOM: 2021 (used since March) Capacity: 15,000 l x 3 (three tanks included)   Manufacturer: Sefiltra Machine Type: tangential filtering equipment Model: CF4 - S SEF + SGG YOM: 2021 (used since November 2021)   Manufacturer: --- Machine Type: gangway, stairs, etc Model: --- YOM: 2021    Manufacturer: Noxerior Machine Type: nitrogen generator Model: NS-21 YOM: 2022 (not used yet)   Manufacturer: Taeevo Tech Machine Type: cooling unit Model: TAE-381-P3 YOM: 2022 (used since June)   Manufacturer: --- Machine Type: pumps Model: --- YOM: 2021 - 2022   Manufacturer: Agrovin Machine Type: liquid dosing unit Model: Agatha PRO YOM: 2021 (not used yet) Capacity: 12,500 l x 7 (seven tanks included)   Manufacturer: Kuka (Nownology) Machine Type: robot depallatizer Model: KR240PA YOM: 2022 (not installed yet) Capacity: 15,000 bph   Manufacturer: Nagema Machine Type: rotary counter pressure filler Model: 40/10 (40 valves and 10 capping elements) YOM: 1990 (completely modernized in 2022, not used yet) Capacity: 10,000 bph Formats: 0,33 l and 0,5 l   Manufacturer: Heuft Machine Type: Fill level inspection Model: --- YOM: 2022 (not used yet)   Manufacturer: Twin Monkeys Machine Type: linear can filler Model: Cimarron / 5 YOM: 2021 (used since November 2021) Capacity: 3,000 cph Formats: div.   Manufacturer: Enos Machine Type: labeller for self adhesive labels Model: S5000 YOM: 2022 (not installed yet) Capacity: 5,000 bph number of labelling stations: 2 Three machines available (one for cans, two for glass bottles)   Manufacturer: SMI Machine Type: wrap around packer Model: WP300 YOM: --- (completely modernized in 2022, not used yet)   Manufacturer: Kuka (Nownology) Machine Type: robot palletizer for cartons Model: KR240PA YOM: 2022 (not installed yet) Capacity: 15,000 bph Dob E Ijuzph Ejhf Tscg

Condition: used, Year of construction: 2023, Overview This is a new brewhouse, which has already been partially completed. If necessary, the brewhouse can be completed within 3-4 months. It has a fully automatic control with the option to reduce to semi-automatic Technical data Maximum quantity of malt 350 k g / 1 brewing run of 10 hl Original gravity up to 22 ° Heating system with steam multipliers Steam requirement: 150 kg / h Heating capacity in the mash tun / wort kettle: 1°C / min and faster Temperature of cold wort 6 ° C (adjusted according to customer requirements) Wort cooling within 50 min. Number of brewing passes during infusion mashing: 3-4 Stainless steel operational platform Scope of Delivery Malt handling and milling system incl. Malt mill, malt tank and transport Brewhouse with 3-vessel-system consisting of:  Hydrator Mash tun with net volume of 10 hl Lauter tun with net volume of 15 hl Whirlpool with net volume of 10 hl Hot water tank with net volume of 24 hl Cold water tank with net volume of 14 hl Wash basin with sample cooler Vapor condensate system Steam generator plant Compressor station Fermentation tank 10 hl, insulated Fermentation tank 20 hl, insulated Storage tanks for tapping 500l Storage tanks for tapping 1000l Control for temperature in fermentation tanks Glycol cooling unit Mobile CIP pump Mobile CIP station KEG semi-automatic washer and filler Hopper for dry hopping Dcsb E Iouzpivjhf Tjg

Condition: used, Year of construction: 2019, Overview  This 40-foot refrigerated container was manufactured in January 2019 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container shows minimal damage and was last serviced in December 2021. The unit works perfectly and the interior is illuminated. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 01/2019 Maximum load capacity: 29,560 kg Tare weight: 4,440 kg Cooling range: -30°C to +30°C Coolant: R 134a Power connection: 32 A heavy current Last maintenance of the cooling system: 12/2021 Interior lighting  Easy cleaning with Easy Clean Paint  Dceb E Ihfouwz Hrs Tsg

Condition: used, Year of construction: 1998, Overview This tumbler, type: Injectstar Magnum 1500 is the perfect massaging Unit in a space-saving compact design for processing all types of meat with and without bones. Equipped with loading unit for 200l bins and integrated cooling aggregate. Technical Details Volume of the machine 1500 liter massaging capacity 675 kg Computer control of working and pause mode Automatic loading Automatic unloading Vacuum 0 – 95 % Vacuum system with filter Width 2 800 mm Length 1 500 mm Height 1 950 mm Installed power: 4,7 kW Voltage: 380 V, 50 Hz Weight 1000 kg Scope of delivery Tumbler with cooling and loading| Injectstar | Magnum 1500 | 1998 Dcjb E Ihjumzpkef Tog

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Dob Esu Nph Is Ihf Tocg

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Djb E Iheu I Hr Uof Tjcg

Condition: used, Year of construction: 2004, Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder Dsb E Iothyqaohf Tscg

Condition: used, Year of construction: 2007, Overview  The water treatment plant consist of an activated carbon filter, a UV treatment and a reverse osmosis system. Additionally it is combined with a SIP cleaning system. The unit was installed and designed in 2007 by PWT. Since then it has only been used a couple of times, in total less than 100 operating hours. The system is still installed, under power and can be demonstrated. Technical details  Capacity: Currently installed: 6,000 l/h Can be upgraded up to 20,000 l/h GEA plate heat exchanger Schärf u. Schall activated carbon filter WEDECO BX50 UV Reactor Integrated SIP system Debjtka Aij E Ihf Tecg

Condition: used, Year of construction: 2015, Overview This brewhouse from the Spanish brand Slowbeer, manufactured in 2015, with a capacity of 500L is still being used in the seller's factory. It is fully functional and can be seen and tested in person. It operates with a thermal oil heating system. Scope of Delivery 500L brewhouse Control panel Boiler 1000L hot and cold water tanks Djb E Ihotyrp Nof Tjcg

Condition: used, Year of construction: 2014, Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.   Dceb E Ihjukafxof Teg

Condition: used, Year of construction: 2008, Overview This cup filling machine was built in 2008 by the German manufacturer Ampack. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details Output: approx. 8,000 cups/hour Dosing units (servo-controlled): Pre-doser: 20 -250 ml Main doser: (80)100 -600 ml Cerialiser (tbd): 5-60 grams Free dosing space Current format sets 4 - corner ZKB, 8 - corner ZKB, round ZKB Control system: Siemens S7 Weight: approx. 25 tonnes Further information, pictures, and videos of the machine on request. Deb E Ihjvn Txwef Tjcg

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Djbon S A R So E Ihf Tscg

Condition: used, Year of construction: 2005, Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder Dcsbem U R Dho E Ihf Tsg

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Deb E Ihfol Hxpno Tecg

Condition: used, Year of construction: 2001, Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270 Dcsbjl Hx Eco E Ihf Tjg

Condition: used, Year of construction: 2007, Overview  The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited.  Machines overview  Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1  Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air  Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine  Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch  Punching of aluminum caps from metal tape rolls Manufacturer: Fords  Model: 320 MD Press  Year of manufacture: 2007 Leak tester  Testing the sealing tightness of the caps Manufacturer: WILCO R18 BS/V Model: Wilcomat Year of manufacture: 2009 Continuous sterilizer Sterilization by thermal treatment  Manufacturer: ACB Hydrolock Model: ACB S-350 Year of manufacture: 2014 Preheater/Cooler Heating or cooling of bottles by means of water cascades (4 heat exchangers to heat or cool the water)  Manufacturer: EZMA Model: - Year of manufacture: 2017  Capper Capping of bottles (with transport lift for caps)    Manufacturer: GYM Model: RA-6C Year of manufacture: 1994                    Labeler Hot gluing of pre-cut labels on the bottle Manufacturer: KRONES Model: Canmatic Year of construction: 1999 Shrink packer Grouping and shrinking of foil to protect the bottles  Manufacturer: OCME Model: VEGA S 50V Year of manufacture: 2001  Palletizer Grouping and stacking of bottles on pallet  Manufacturer: STORK  Model: SPE - 200 Year of manufacture: 2001 Pallet winder Wrapping of the pallet with foil  Manufacturer: OCTOPUS Model: 1600 BF Year of manufacture: 2001 Dcsb E Ihel Hx Hljf Tsg

Condition: used, Year of construction: 2014, Overview The water softener is a double unit with 2x3 bottles. The plant was manufactured in 2014 by the German manufacturer Grünbeck and is free because the owner invests in a new, larger plant. The plant is still in operation and can be inspected. Technical details Capacity: 2x 8 m3/h Softening from approx. 15°dH to approx. 3°dH with flow admixture Last maintenance: 21.3.2022 Incl. 2x salt tank à 210 l Dceb E Isl Hx Raehf Tsg

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Dob Eol Hx Rpj Ihf Tocg

Condition: used, Year of construction: 2008, Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Machine pitch 377 mm Diameter 360 mm Number of capping heads 3 Including feeder for the capping heads Dcob E Ihomrpv Djf Tsg

Condition: used, Year of construction: 1999, Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000            Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Dcob E Ihorkgy Ajf Tog

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Dcsb E Ihfstuyq Ao Tjg

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Deb E Ihfeqqz T Hj Tjcg