Used Beverage production for sale (920)

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Djlir Uel Hx Rpsuzjkl

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Dkjlirotuyq Aj Uuzjl

Condition: used, Year of construction: 2012, Overview This traysealer, type: SEALPAC A4 was built in 2012 in Oldenburg / Germany. You can get started with fully automatic fresh produce packaging. Technical Details 2 formats Electrical connection: 220 V, 3 Ph, 50-60 Hz, 8 kW, weight: 1500 kg, total dimensions: 5500 mm x 850 mm x 2100 mm. Scope of delivery tray sealer | Sealpac | A4 | 2012   Dkolir Uujty Ddlozsl

Condition: used, Year of construction: 2013, Overview This ASP 600HDN flattener from the German manufacturer ALCO-FOOD-MACHINES/ JBT was built in 2013. Suitable for flattening and rolling out fresh and frozen meat (down to -4 ° C). Technical details Belt width: 600 mm Speed: 1.5...12 m/min Product thickness: 4 – 40 mm (adjustable) Working height: 1,020 mm +/- 75 mm Power supply: Power: 1 kW, 16 A Voltage: 400 V / 50 Hz 3 Phasen + N + PE Fresh water (adjustable): 0 -30 l/h Dimensions: Length: approx. 2,100 mm Width: approx. 750 mm Height: approx. 1400 mm +/- 75 mm Weight: approx. 300 kg Scope of delivery flattener | ALCO | ASP 600HDN | 2013 Dkolijty Dd Esr Uuzsl

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Dkolir Uotz H T Djuzjl

Condition: used, Year of construction: 2011, Overview This blow moulder was built in 2011 by French manufacturer SIDEL. The machine has been regularly serviced by SIDEL and is in a very good condition. The Sidel SBO 20 Universal Eco2 is still installed but not in production anymore.   Technical Details  Nominal capacity: 40,000 bph   Current capacity: 38,000 bph with different formats   Neck: 38 mm   20 standard quick change moulds (moulds are not included)   19,900 working hours  Scope of Delivery  Blow Moulder Sidel SBO20   Oven Sidel Universal Eco2   Preforms tipper Sidel EBHS 2050  Sidel hopper with cover  Preforms elevator and unscrambler  Preforms alimentation infeed rail   Pressco control preforms ovalisation   Sidel “banana” preforms controller,   Vulcanic water thermoregulator  Sidel PCC blower & Pressco PCC drive         Sidel electrical cabinet with A/C  Dkelir Uuot Elb Iszol

Condition: used, Year of construction: 2003, Overview This blow moulder was built in 2003 by French manufacturer Sidel. The machine is in very good condition and fully operational. It is still installed and can be viewed in person at any time. Techn. Details Capacity: 12,000 bph Number of molds: 8 Quick change for shell mold Bottle neck: PCO 28mm, 1881 (short-neck) Scope of delivery Blow moulder | SIDEL | SBO 8 Series 2 | 2003 Preform tipper Preform silo Elevator Unscrambler Slide Without molds and chiller Djlir Uetx Hkfeuzekl

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Dkelirjvdd Uus Uuzjl

Condition: used, Year of construction: 2005, Overview Industrial Lamination Line for hard biscuits and crackers An integrated solution of the whole process from the beginning to the end. The line was manufactured in 2005. The line manufacturer LASER s.r.l. located in Italy. Flexible process line equipped with various accessories to allow producing many products. The versatile line consists of: •      Dough handling system to fill a three roll sheeter •      Lamination unit •      Four gauging stations •      Relaxation conveyor •      Air blowing unit •      Two cutting units (engraving and cutting by a rotary cutting machine) •      Wash-over unit •      Lye bath (including heating) •      Three topping applicators (for salt or various seeds) •      Tunnel oven (hybrid: DGF and cyclothermic zone) •      Oil Sprinkler Machine •      Manuals (operators and electric schemes) in English   The line working width 0.8m, the oven baking length is 25m. The line is still running in production. The line capacity is approx. 300kg per hour of finished products The tunnel oven is heated by natural gas burners. The periodical maintenance of the entire line is carried out accord to the regulations. Scope of delivery Full line | LASER | line | 2005 Dkslir Uevbh A Reuzol

Condition: used, Year of construction: 1999, Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included Dkslir Uju Aim Deuzel

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Dkolirju H R Nns Uuzjl

Condition: used, Year of construction: 2006, Overview  The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspection and quality control of empty bottles in filling lines. The empty bottle inspector is equipped with several rejections and a wide range of accessories. Technical details  Output: Up to 36,000 bottles/hour Location: Germany Installation location: In front of the filler Immediately available Inspection functions  Bottom inspection: 1st bottom-IN-r Mouth inspection: Mouth-IN-r Side wall inspection: 1. sidewall-IN-r 2nd side wall IN-r Side wall with double resolution-r Support ring inspection: PET-r Abrasion inspection: RefPet Abrasion-r Ventslot inspection: RefPet Ventslot-r Stress crack detection: Stress Crack Detection-r Residual liquid detection: IR Rejection and adjustment options  Rejection: mono-X, DELTA-K-X Inlet control: mono-X Height adjustment: For rejections Cross adjustment: For rejections Accessories  Height-adjustable transport belts Cooling units for base housing and side wall Mouth outlet Dkjleu Scr Ejir Uuzsl

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Djlir Ueu Scr Souzjkl

Condition: used, Year of construction: 1999, Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000            Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Dkjlirorkgy Ao Uuzol

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Dkjlir Uovmyuieuzol

Condition: used, Year of construction: 2016, Overview  This Braucraft Mexicana brewing system has three tanks with a capacity of 3,000 liters: mash tank, lauter tank and kettle/whirlpool tank. The system was designed for continuous operation and enables double brewing per day. It is currently stored professionally and can be viewed by appointment. Operation is via steam. Technical details  Wort capacity: 3,000 liters Tanks: Mash Lauter Boiler/whirlpool Additional tanks: HLT (Hot Liquor Tank): 6,000 liters usable capacity, steam-heated CLT (Cold Liquor Tank): 6,000 liters, laser-welded cooling jacket Pumps: 5 transfer pumps for HLT, CLT and brewing system operations Heat exchange: 1-stage plate heat exchanger (Thermowave) Control: Analog control panel with Frequency converter for brewing system pump Frequency inverter for HVAC and CLT pumps Temperature measurement and control for HLT, boiler/whirlpool, mash and lauter Scope of delivery Platform Grain silo and grain hydrator 3 hp geared motors with built-in agitators and plows Mixing manifold and 1.5” jacket-insulated sanitary pipes with valves Djlievt Srgsr Uuzskl

Condition: used, Year of construction: 2019, Overview    This cold glue labeler was manufactured in 2019 by the German manufacturer Gernep and used in a Belgian brewery. The machine was regularly maintained by OEM. The labeler was dismantled in summer 2024  Technical details  Capacity: 6,000 bottles/h    Formats: 330 ml, Neck (over the mechanical closure) and front label  Working direction: counter clockwise, r-l  Doljuhthmoir Uuzokl

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Dslir Uovptt Rjuzokl

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Djlir Uuoqvvpaszjkl

Condition: used, Year of construction: 2019, Overview  This canning machine “100FBEV” from British manufacturer, Innovus, was built in 2019. It has been well maintained with regular servicing and is in great condition.  Tech. Details  Capacity: 2000 cans per hour Number of filling heads: 6  Can formats:  330ml 440ml Can end spec: 200 + 202 Dimensions (Floor): 2500mm x 1300mm Machine weight: 600kg Added bonus of UK engineering support (cost at buyer expense)   Djlir Uuer A S E Aezskl

Condition: used, Year of construction: 2004, Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise Dkelir Uol Hxl Isuzol

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Djliel Hxnior Uuzjkl

Condition: used, Year of construction: 2014, Overview The tunnel pasteuriser Linaflex was manufactured in 2014 by Krones. Until now it was used in a can filling line in a beverage company in Germany. The owner sold the complete line, but as the buyer does not need this tunnel pasteuriser, it is for sale. The machine has been disassembled and can be inspected, last production in fall 2022, then cleanly dismantled. The machine has been regularly serviced by Krones technicians and is therefore in excellent condition. Tech Specs: Capacity 0,15l, 0,25l             65.000 cans/ h 0,33l             50.000 cans/ h 0,5l            37.000 cans/ h Djlijl Hx D Hjr Uuzjkl

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Dkelirel Hx Ibj Uuzol

Condition: used, Year of construction: 2009, Overview This continously crate washer, type: HOBART FUX-C was built in 2009 in Germany. The crate wahser ensures that all the dirt on the crate, such as proteins, blood residues, fasts and dried-on dirt, is removed in a single wash cycle. Technical Details Capacity: up to 150 crates/ hour width 992 mm length 3.000 mm height 1.474 mm max crate width 612 mm max crate height 440 mm Scope of delivery continously crate washer | HOBART | FUX-C | 2009 Dkjlir Usub Rqfouzjl