Used Beverage production for sale (935)

Condition: used, Year of construction: 2004, Overview  The labeler was manufactured in 2004 by the German manufacturer Gernep. The last service was carried out in October 2021. Various label combinations can be realized with this machine. Including the application of wet glue and self-adhesive labels in combination on the bottles. The machine is sold without label monitoring. The machine is expected to be in operation until the end of 2024 and can be inspected at any time. Technical details  Output: approx. 6,000 bottles/h   Formats: 250ml, 750ml, 1,000ml  Right-left machine  2 wet glue stations  3 self-adhesive stations  12 bottle plates  Automatic machine. Lubrication  Bottle alignment unit  Dueb Hsq N Tu Heht Riot

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Dsb Hhtsvptt Ro Riout

Condition: used, Year of construction: 2005, Overview Industrial Lamination Line for hard biscuits and crackers An integrated solution of the whole process from the beginning to the end. The line was manufactured in 2005. The line manufacturer LASER s.r.l. located in Italy. Flexible process line equipped with various accessories to allow producing many products. The versatile line consists of: •      Dough handling system to fill a three roll sheeter •      Lamination unit •      Four gauging stations •      Relaxation conveyor •      Air blowing unit •      Two cutting units (engraving and cutting by a rotary cutting machine) •      Wash-over unit •      Lye bath (including heating) •      Three topping applicators (for salt or various seeds) •      Tunnel oven (hybrid: DGF and cyclothermic zone) •      Oil Sprinkler Machine •      Manuals (operators and electric schemes) in English   The line working width 0.8m, the oven baking length is 25m. The line is still running in production. The line capacity is approx. 300kg per hour of finished products The tunnel oven is heated by natural gas burners. The periodical maintenance of the entire line is carried out accord to the regulations. Scope of delivery Full line | LASER | line | 2005 Duob Hhtsvbh A Rs Riet

Condition: used, Year of construction: 2016, Overview  This Braucraft Mexicana brewing system has three tanks with a capacity of 3,000 liters: mash tank, lauter tank and kettle/whirlpool tank. The system was designed for continuous operation and enables double brewing per day. It is currently stored professionally and can be viewed by appointment. Operation is via steam. Technical details  Wort capacity: 3,000 liters Tanks: Mash Lauter Boiler/whirlpool Additional tanks: HLT (Hot Liquor Tank): 6,000 liters usable capacity, steam-heated CLT (Cold Liquor Tank): 6,000 liters, laser-welded cooling jacket Pumps: 5 transfer pumps for HLT, CLT and brewing system operations Heat exchange: 1-stage plate heat exchanger (Thermowave) Control: Analog control panel with Frequency converter for brewing system pump Frequency inverter for HVAC and CLT pumps Temperature measurement and control for HLT, boiler/whirlpool, mash and lauter Scope of delivery Platform Grain silo and grain hydrator 3 hp geared motors with built-in agitators and plows Mixing manifold and 1.5” jacket-insulated sanitary pipes with valves Dujb Hhovt Srgot Rist

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Dusb Hhtetz H T Ds Rist

Condition: used, Year of construction: 2006, Overview  The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspection and quality control of empty bottles in filling lines. The empty bottle inspector is equipped with several rejections and a wide range of accessories. Technical details  Output: Up to 36,000 bottles/hour Location: Germany Installation location: In front of the filler Immediately available Inspection functions  Bottom inspection: 1st bottom-IN-r Mouth inspection: Mouth-IN-r Side wall inspection: 1. sidewall-IN-r 2nd side wall IN-r Side wall with double resolution-r Support ring inspection: PET-r Abrasion inspection: RefPet Abrasion-r Ventslot inspection: RefPet Ventslot-r Stress crack detection: Stress Crack Detection-r Residual liquid detection: IR Rejection and adjustment options  Rejection: mono-X, DELTA-K-X Inlet control: mono-X Height adjustment: For rejections Cross adjustment: For rejections Accessories  Height-adjustable transport belts Cooling units for base housing and side wall Mouth outlet Duob Hheu Scr Ejt Riet

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Dsb Hhju Scr Set Rieut

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Dujb Hhovdd Uujt Riet

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Dueb Hhovmyuiet Riet

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Deb Hhtoqvvpae Riout

Condition: used, Year of construction: 2019, Overview  This canning machine “100FBEV” from British manufacturer, Innovus, was built in 2019. It has been well maintained with regular servicing and is in great condition.  Tech. Details  Capacity: 2000 cans per hour Number of filling heads: 6  Can formats:  330ml 440ml Can end spec: 200 + 202 Dimensions (Floor): 2500mm x 1300mm Machine weight: 600kg Added bonus of UK engineering support (cost at buyer expense)   Dujb Hhtsr A S E As Riot

Condition: used, Year of construction: 2004, Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise Dob Hht Rol Hxl Ioisut

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Duob Hhtel Hxnie Rist

Condition: used, Year of construction: 2014, Overview The tunnel pasteuriser Linaflex was manufactured in 2014 by Krones. Until now it was used in a can filling line in a beverage company in Germany. The owner sold the complete line, but as the buyer does not need this tunnel pasteuriser, it is for sale. The machine has been disassembled and can be inspected, last production in fall 2022, then cleanly dismantled. The machine has been regularly serviced by Krones technicians and is therefore in excellent condition. Tech Specs: Capacity 0,15l, 0,25l             65.000 cans/ h 0,33l             50.000 cans/ h 0,5l            37.000 cans/ h Dueb Hhtjl Hx D He Riot

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Dujbsl Hx Ibe Hht Riot

Condition: used, Year of construction: 2009, Overview This continously crate washer, type: HOBART FUX-C was built in 2009 in Germany. The crate wahser ensures that all the dirt on the crate, such as proteins, blood residues, fasts and dried-on dirt, is removed in a single wash cycle. Technical Details Capacity: up to 150 crates/ hour width 992 mm length 3.000 mm height 1.474 mm max crate width 612 mm max crate height 440 mm Scope of delivery continously crate washer | HOBART | FUX-C | 2009 Dob Hheub Rqfst Rijut

Condition: used, Year of construction: 2012, Overview  This packaging machine for cups was built in 2012 by the German manufacturer Schubert. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details  Output: 270 cups/minute Format range Round cups D = 63 - 95 mm H = 35 - 125 mm 2 - chamber cup 86 x 86 mm 109 x 109 mm (square) 125 x 95 mm (oval) Type of packaging Primary packaging Cups in sleeves, then in trays and crates Format range, max. sleeve length flat blank: 450 mm Secondary packaging Trays and trays: Solid cardboard (trays) and corrugated cardboard Format range, flat cut: 200 x 400 mm - 600 x 800 mm Tray height = 15 - 55 mm Tray height = 35 - 100 mm Last used for Tray 24 Tray of 8 12 tray Control: Schubert via individual modules Weight: approx. 15 tons Further information, pictures and videos of the machine on request Duob Hhtevpd S Re Riet

Condition: used, Year of construction: 2018, Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz Dusb Hht Rsvpi Abjiet

Condition: used, Year of construction: 2004, Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Dsb Hom D Ukijht Rieut

Condition: used, Year of construction: 2000, Overview  The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request.  Technical data  Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph  Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed Djb Hhtjm Ip Dke Rijut

Condition: used, Year of construction: 2022, Overview  The glass bottle filling line was manufactured in 2022 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. Plant in detail  Robot depalletizer | Kuka (Nownology) | KUKA KR 470 PA | 2022  Capacity: 15,000 bph Weight: 470 kg  Isobarometric Filler | Nagema | 40/10 | 1990 Completely overhauled/modernised and also equipped with a new control system in 2022 Unused since overhauling  Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fill level inspection | Heuft | --- | 2022 2x Labeller | ENOS | S5000 | 2022 for self adhesive labels Capacity: 5,000 bph Self-adhesive labels  Number of labelling stations: 3 Length: 2.850mm Width: 1.500mm Height: 2.000mm Weight: 450Kg Electr. connected load: 2 kW Wrap around packer | SMI | WP300 | ---  Modernized in 2022 (unused since then) Robot palletizer | Kuka (Nownology) | KR240PA | 2022  Capacity: 15,000 bph Weight: 240 kg 4 - 14 kg boxes Scope of delivery Conveyors  Duob Hsmk I Dpjht Riet

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Dob Hhtomnkhfo Rijut

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  Electrical panels for tanks and pumps Stainless steel tank | model DFF99 | 2000 | 25,000 liters Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters 4x Fermentation tank | 3,000 liters 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters Open tank Low tank | model STORK TGSW Filter | model PSF JB 014 350143 | 2017 Grinder | model OOEHLER OL 6000 | 2016 Silo and feeder Resistance tank | model PROMINOX | 2016 | 3,000 liters 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters Filter tank | model PROMINOX | 2016 | 4,500 liters 2x Pump | model MIM GRUP FL31Cl Pump | model CALPEDA MXH 204/A Industrial scale | model GRAM MISSIL F2-60 Pump | model LOWARA HTB 32-125/30 Pump | model ABB INOX MIM GRUO FLUID-102 Industrial sink Refrigeration chamber Pump | model PYD SH2-40 Osmosis system | model HIDROTEC Water treatment system Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 Compressor | model INGERSOLL-RAND 11BAR | 2001 Boiler | model ATTSU RL-400/12 Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999 Duob Hhetzg H Djt Riet

Condition: used, Year of construction: 2007, Overview This angle meat grinder, type: Laska WW 160 1G was built in 2007 in Austria. It is a 160mm angle grinder, stainless steel machine, with loading device for 200 liters trolleys, hopper capacity approx. 350 liters, 1 speed working worm, 1 speed feeding worm. Designed for practicality and performance, provides seamless operation of food production facilities. Its ability to grind both fresh and frozen products (up to -5 C) The Machine comes in a set with loading device for 200l meat bins and trolley for tools. The machine will be overhault including refitted outfeed protection and circular safety for the hopper. Technical Details Throat diameter: 160 mm Power: 36 kW Efficiency: up to 9.000 kg/h Dimensions: L: 1800 x W: 1650 x H: 1600mm (2850mm with loading)Weight: approx 2000kg Scope of delivery angle meat grinder | LASKA | WW 160 1G | 2007 Djb Hhst Hzkbjt Riout

Condition: used, Year of construction: 2012, Overview This spiral oven, type: Unitherm (Marlen) XS-OV-12-E was built in 2012. The spiral oven convey food upward by contiuous belt that travel in 6 circular tiers within a single oven cover. This sytem is more versatile and have a smaller footprint than linear oven. Aplications: roasting, baking , broiling, steaming, pasteurizing or cooking of f.e. bacon, chicken parts, seefood, kebabs and vegetables. Technical Details Unitherm spiral oven, model: XS, serial number: SPOV-XS08, s/s mesh belt, belt width: 300 mm, clearance: 340 mm x 140 mm (product height max. 100 mm) total dimensions: 2200 mm x 1850 mm x 2300 mm. Steam supply: 200 lbs Water supply: 0,25 gal Electric supply: 68 kW Scope of delivery Spiral oven | Unitherm (Marlen) | XS-OV-12-E | 2012   Deb Hhjt Tr Siot Riout