Used Beverage production for sale (935)

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Duelovdd Uusiqkh Dst

Condition: used, Year of construction: 2005, Overview Industrial Lamination Line for hard biscuits and crackers An integrated solution of the whole process from the beginning to the end. The line was manufactured in 2005. The line manufacturer LASER s.r.l. located in Italy. Flexible process line equipped with various accessories to allow producing many products. The versatile line consists of: •      Dough handling system to fill a three roll sheeter •      Lamination unit •      Four gauging stations •      Relaxation conveyor •      Air blowing unit •      Two cutting units (engraving and cutting by a rotary cutting machine) •      Wash-over unit •      Lye bath (including heating) •      Three topping applicators (for salt or various seeds) •      Tunnel oven (hybrid: DGF and cyclothermic zone) •      Oil Sprinkler Machine •      Manuals (operators and electric schemes) in English   The line working width 0.8m, the oven baking length is 25m. The line is still running in production. The line capacity is approx. 300kg per hour of finished products The tunnel oven is heated by natural gas burners. The periodical maintenance of the entire line is carried out accord to the regulations. Scope of delivery Full line | LASER | line | 2005 Deliqovbh A Rokh Dsut

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Doliqju H R Nnjkh Dsut

Condition: used, Year of construction: 1999, Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included Dujliqsu Aim Dokh Dot

Condition: used, Year of construction: 2016, Overview  This Braucraft Mexicana brewing system has three tanks with a capacity of 3,000 liters: mash tank, lauter tank and kettle/whirlpool tank. The system was designed for continuous operation and enables double brewing per day. It is currently stored professionally and can be viewed by appointment. Operation is via steam. Technical details  Wort capacity: 3,000 liters Tanks: Mash Lauter Boiler/whirlpool Additional tanks: HLT (Hot Liquor Tank): 6,000 liters usable capacity, steam-heated CLT (Cold Liquor Tank): 6,000 liters, laser-welded cooling jacket Pumps: 5 transfer pumps for HLT, CLT and brewing system operations Heat exchange: 1-stage plate heat exchanger (Thermowave) Control: Analog control panel with Frequency converter for brewing system pump Frequency inverter for HVAC and CLT pumps Temperature measurement and control for HLT, boiler/whirlpool, mash and lauter Scope of delivery Platform Grain silo and grain hydrator 3 hp geared motors with built-in agitators and plows Mixing manifold and 1.5” jacket-insulated sanitary pipes with valves Dusliqjvt Srgekh Dst

Condition: used, Year of construction: 2006, Overview  The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspection and quality control of empty bottles in filling lines. The empty bottle inspector is equipped with several rejections and a wide range of accessories. Technical details  Output: Up to 36,000 bottles/hour Location: Germany Installation location: In front of the filler Immediately available Inspection functions  Bottom inspection: 1st bottom-IN-r Mouth inspection: Mouth-IN-r Side wall inspection: 1. sidewall-IN-r 2nd side wall IN-r Side wall with double resolution-r Support ring inspection: PET-r Abrasion inspection: RefPet Abrasion-r Ventslot inspection: RefPet Ventslot-r Stress crack detection: Stress Crack Detection-r Residual liquid detection: IR Rejection and adjustment options  Rejection: mono-X, DELTA-K-X Inlet control: mono-X Height adjustment: For rejections Cross adjustment: For rejections Accessories  Height-adjustable transport belts Cooling units for base housing and side wall Mouth outlet Delisu Scr Eeqkh Dsut

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Dujleu Scr Seiqkh Det

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Doliqovptt Rskh Dout

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Dolovmyuioiqkh Dout

Condition: used, Year of construction: 2004, Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Djlijm D Ukisqkh Deut

Condition: used, Year of construction: 2000, Overview  The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request.  Technical data  Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph  Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed Dsliqom Ip Dkjkh Dsut

Condition: used, Year of construction: 2022, Overview  The glass bottle filling line was manufactured in 2022 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. Plant in detail  Robot depalletizer | Kuka (Nownology) | KUKA KR 470 PA | 2022  Capacity: 15,000 bph Weight: 470 kg  Isobarometric Filler | Nagema | 40/10 | 1990 Completely overhauled/modernised and also equipped with a new control system in 2022 Unused since overhauling  Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fill level inspection | Heuft | --- | 2022 2x Labeller | ENOS | S5000 | 2022 for self adhesive labels Capacity: 5,000 bph Self-adhesive labels  Number of labelling stations: 3 Length: 2.850mm Width: 1.500mm Height: 2.000mm Weight: 450Kg Electr. connected load: 2 kW Wrap around packer | SMI | WP300 | ---  Modernized in 2022 (unused since then) Robot palletizer | Kuka (Nownology) | KR240PA | 2022  Capacity: 15,000 bph Weight: 240 kg 4 - 14 kg boxes Scope of delivery Conveyors  Dujliemk I Dpoqkh Dst

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Dueliqkomnkhfoh Det

Condition: used, Year of construction: 2004, Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise Doliqel Hxl Iskh Dout

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Djliqsl Hxniekh Deut

Condition: used, Year of construction: 2014, Overview The tunnel pasteuriser Linaflex was manufactured in 2014 by Krones. Until now it was used in a can filling line in a beverage company in Germany. The owner sold the complete line, but as the buyer does not need this tunnel pasteuriser, it is for sale. The machine has been disassembled and can be inspected, last production in fall 2022, then cleanly dismantled. The machine has been regularly serviced by Krones technicians and is therefore in excellent condition. Tech Specs: Capacity 0,15l, 0,25l             65.000 cans/ h 0,33l             50.000 cans/ h 0,5l            37.000 cans/ h Dueljl Hx D Hsiqkh Dot

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Dueliqjl Hx Ibekh Djt

Condition: used, Year of construction: 2018, Overview  The crater was used in a Belgian brewery and was stopped in Summer 2024. It was used to put 330ml bottles with mechanical closure into a wooden or plastic crate. Technical Details  Manufacturer: TMG Year of manufacture: 2018 Model: IEC 61439-2 Bottle Format: 330ml Crate format: 4x3 wooden or plastic crate Capacity: 8 cycles per minute Dujliqkouhthtoh Djt

Condition: used, Year of construction: 2016, Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16 Dolijuhthyeqkh Dout

Condition: used, Year of construction: 2014, Overview  This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person.  Scope of delivery  Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014 Dolor Hkaqeiqkh Dsut

Condition: used, Year of construction: 2020, Overview    The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little.  Technical Details  Capacity: Up to 2.160 bottles per hour   Number of filling heads: 6   Last used formats: 0,33l Longneck   Possible bottle diameter: 5.3 cm - 7.6 cm  Dimensions (Floor): 1680 mm x 1070mm  Deliqker Hx Dijh Dout

Condition: used, Year of construction: 2019, Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat exchanger | Alfa Laval | TL3-PFG | 2019 Accessories: Compressor NUAIR 200L, Connectors, Hoses, Transfer pump BUSCK 3-phase Motor IE3, water heater, fridge, freezer Dusliqkhsr I R Edj Det

Condition: used, Year of construction: 2013, Overview  This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 3,000 bottles / hour (according to manufacturer)  Formats: Currently set up for 330 ml longneck bottle  Counter-pressure filler with double pre-evacuation  Total operating hours: less than 1,000 hours  Running direction: right - left  Filling valves mechanical electropneumatic  Mechanical height adjustment  With color touch screen monitor  Dismantling and transfer took place in December 2023/January 2024  Optional (not included in the price): Bottle conveyor belts incl. loading and unloading table  Dueliqetm Hv Tjkh Dot

Condition: used, Year of construction: 2010, Overview  This SOGECAL steam boiler, model M8KK, was manufactured in 2010 and is available for sale due to the company's relocation, where it is no longer required. It has been used exclusively for beer production, runs on diesel fuel and is available immediately. Technical Data  Model: M8KK Year of Manufacture: 2010 Fuel Type: Diesel Service Pressure: 8 Kg/cm² Test Pressure: 17 Kg/cm² Design Pressure: 11 Kg/cm² Steam Production: 450 Kg/h Thermal Power: 2700 Kcal/x100 Heating Surface: 8.8 m² Operating Temperature: 174 °C Volume of Water/Oil: 0.65 m³ Djliqsuqrd Tjkh Dout

Condition: used, Year of construction: 1997, Overview This MAGURIT 052 frozen block cutter the German manufacturer MAGURIT was built in 1997 and is maintained. Suitable for frozen blocks (down to -20 ° C). For small and mid-size producers. Cutting of E2-blocks. The blocks are fed into the cutting area by a pneumatically operated lifting chute. Product is discharged directly into 200 ltr. meat trolleys. Technical Details Height  1750 Width   950 mm Length  1900 mm Voltage Electrical: 400V 50Hz 3N Main material   Stainlees Steel Chamber dimentions     530 x 600 x 280 mm Scope of delivery GUILLOTINE frozen block cutter | MAGURIT | 052 | 1997 Djljt Drulsiqkh Deut