Used broaching & slotting & drawing machines for sale (175)

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available Kjdpfx Ahjitt R Is Usnf -Price per piece -Total dimensions: Ø 22 x 925 mm -Weight: 2.1 kg/piece

Condition: used, slot-milling length 300 mm groove width 34 mm Kjdpfx Ahed Ih Uie Uenf flute depth mm cutting speed 6 m/min return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg dimensions of the machine ca. 590 x 1150 mm Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)

Condition: good (used), pulling force - max. 6 t max. ram stroke 800 mm Kodpfsw Saihox Ah Usnf max. workpiece diameter 40 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,8 x 1,4 m

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Knedpfx Ajwu Suveh Usf Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Year of construction: 1965, condition: used, groove width 3 - 90 mm Ksdpfx Ajtv Iatoh Uenf drawing length 430 mm working speed 4 - 12 m/min slot-milling length 400 mm return speed 15 m/min total power requirement 5,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,3 x 1,7 x 1,5 m • with various honing needles and guidances

Condition: excellent (used), Punch St 225 Knjdpst Sigzefx Ah Ujf Hydropneumatic, air consumption 9l/per stroke Ram stroke 30 mm Punch pressure 3600 Kp at 6 bar 6000 Kp at 10 bar Pressure ratio 1:6 Foot switch Projection 100 mm, table surface 280 x 200 mm Weight 60 kg

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m Knsdpfxjw Dugao Ah Usf clamping plate: 320 mm

Condition: used, Year of construction: 1990, max.: tractive force 25.000 KG Knedpfxecm Eiwe Ah Ujf max.: tool length 3520 mm max.: cutting speed 9,6 m/min passage width 520 mm The machine has machined connecting rods and con rod caps. The machine is designed for mass production (output 400 pieces/hour).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, workpiece diameter (max.): 900 mm, stroke length: 2,000 mm, control type: PLC-controlled, TECHNICAL DETAILS General Data Towing force: max. 9 t Total power requirement: 25 kW MACHINE DETAILS Machine type: Electromechanically driven internal vertical broaching machine FSR Features: Designed bridge for use with standard broaching tool holders Drive: Ball screw drives and hardened, ground round guides with regulated three-phase motors for smooth operation EQUIPMENT Ksdpfx Ahswx Ifxs Uonf Feeds available Shim control available Sliding tables available Prepared for automation and integration into linked systems

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Vertical Notch Broaching Machine Manufacturer: Blacks Model: 1 W-CNB 34 Machine No.: S05035C Year of manufacture: 4/2005 Weight: 95kg General / Technical Data: Very well-maintained broaching machine for external notching of samples for tensile testing Broaching speeds: variable from 0.43 to 2.27 m/min Dimensions (H x W x D): 1370mm x 600mm x 450mm Power supply: 400V / 50 Hz Equipment: - Variable speed control via adjustable mechanical gearbox (manufacturer: Lenze); no electronic control! - Clamping fixture for tensile specimens Knsdpfx Aow Rpvzeh Uof - 3 used broaching tools - Machine documentation in German and English - Machine documentation including “CE” declaration of conformity in English General Information The dual spindle drive ensures smooth operation and a centrally aligned pull point, as well as a consistently uniform broaching speed. The broaching machine is a specially designed unit for machining V- and U-notches according to Charpy and Izod standards in pre-machined, square 10-mm standard test specimens. The CNB-34 produces a consistent notch of higher quality than what is achievable by milling. The machine is easy to operate and features a robust construction with removable maintenance panels for convenient routine servicing. Its design provides a comfortable working height. During the cutting process, a specially designed broaching tool is drawn over the specimen. The broaching tool is pulled downward into the machine via a gearbox and a dual spindle drive. The specimen is secured in the machine using the special clamping fixture. The broaching tool is lubricated with cutting oil. By pressing the broaching cycle button, the notch tool is forcibly guided down through the specimen, producing an accurate notch profile. After cutting the notch, the specimen must be removed before returning the tool. The tool is then returned without a workpiece and cleaned of any chips. Only after this cleaning step is the machine ready for further operation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 25, workpiece diameter (max.): 40 mm, total length: 1,700 mm, total width: 2,400 mm, total height: 4,770 mm, cutting speed: 60,000 mm/min, TECHNICAL DETAILS Performance Data Maximum pulling force: 25 kN Maximum stroke: 1,000 mm Return stroke speed: 20 m/min Maximum shank diameter: 40 mm Clamping plate: 320 mm MACHINE DETAILS Machine weight: approx. 6,000 kg Control cabinet Weight: approx. 800 kg Total installed power: 24 kW Coolant system Net weight: approx. 1,300 kg Tank capacity: 630 l Kjdpfxowx Ibmo Ah Usnf Hydraulic unit Net weight: approx. 2,000 kg Tank capacity: 800 l

Year of construction: 1987, condition: used, machine/vehicle number: 34, gr. tractive force: 10 to Knsdpfx Asnd Dmjh Uef gr. stroke 1000 mm cutting speed: 7,5 m/min return speed: 24 m/min weight: 6,2 to Machine is suitable for tube clearing

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm max. cutting speed: 10 m/min. max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor Kodpfx Ahjcdtnhe Uenf 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Knedpjw Ighisfx Ah Uof Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: used, Year of construction: 1990, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm Knjdpjinim Tsfx Ah Ujf power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) Ksdpew H Dgnofx Ah Usnf - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor Kjdpfew Huh Nsx Ah Uonf - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system Knjdpfx Ahed I R Ngj Uof equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1955, condition: used, machine/vehicle number: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2950 KG Machine. No.: 1331 General / technical data: Ksdpfx Asdbr H Teh Ujnf hydraulic horizontal internal broaching machine in a good working condition clearing length: 1500mm turning: 1 piece pulling force: 10000 KG at 3m/min (5000KG at 7m/min) Clamping tool: universal pulling head for flats up to 26mm width Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and oil sump) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 6200mm x 700mm x 1900mm (without working area) Power supply / connected load: 380Volt 50 HZ / 8 KW hydraulic motor: 7,5 KW Accessories / special equipment: - the machine is equipped with a universal drawing head for flat sheets - the machine has a movable coolant cutting unit for 2 media - the machine has an oil and oil tank with a tool feeder slide Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is very clean in the area of the guides and the cylinder. Broaches and mandrels can be supplied on request. The machine is ready for inspection under power in our warehouse.

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Knsdeda Ugiepfx Ah Usf Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: used vertical hydraulic indoor rasping machine with 1 rasping point in a working condition tractive force: 6000 KG clearing length: 1000mm diameter of the pulling head: Ø 85 mm passage width between the cylinders: max. 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connected load: 380Volt 50 HZ / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 rearrangement. The tool clamping system is provided for a spring-mechanical locking (DIN 1415). The machine has an integrated cooling system. There is a double pulling head for 2 flat broaching tools with tool support plate. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production use with medium batch sizes. For the use ideally a machine pit or alternatively a platform is needed. Drawing heads are available on request. The machine has no tool feeder. The machine can be inspected in our warehouse under power.

Year of construction: 1962, condition: used, machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing stroke: 1320mm turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A Knsdpodl Uzkefx Ah Usf hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition tractive force: 25000 KG clearing length: 2000mm wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Knodpfxsdffzfe Ah Usf Remarks: The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Year of construction: 1951, condition: good (used), machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine manufacturer: Karl Klink type: RW 10 built in: 1951 Kededcdrpopfx Ah Ujnf stroke 1500mm pulling force: 10.000KG working stations: 1PCs drive: hydraulic system equipment: coolant system Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). Knjdpfx Ahsdbmgme Uef The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Year of construction: 1959, condition: used, gr. tractive force: 16 to. gr. stroke: 1250 mm cutting speed: 5,6 m/min Knedpfx Ae Rwa Ujh Usf return speed: 30 m/min