Used Circular saws for sale (138)

Condition: used, Circular saw Manufacturer: Korvet Log diameter from 150-800mm Cgeljwainqerd U Dnjt

Condition: good (used), Year of construction: 1996, Functionality: fully functional, cutting height (max.): 75 mm, cutting width (max.): 1,200 mm, saw blade diameter: 400 mm, Slitting and cross-cutting saw well maintained in good condition Year of production 1996 GOMAD Poland from the new we are the only owner on the equipment of the unit with the undercutting slab and an additional guide for cutting at an angle, up-and-down blade and tilting at an angle up to 45 degrees DTR documentation. Technical data Undercutter on a separate motor 0.75 kw Cgelsu Axf Nerd U Dnot Tilting at an angle 0 45 ' Side carriage Upper shield on the arm Polish manufacturer Gomad Massive stable strong construction Extension and extension tables Cutting width on the right side 120 cm Main saw motor 6 kW, 2880 rpm RPM of undercutting saw 8500 rpm Swing of the saw 0-45° max. bore diameter of main saw f 30 mm max. blade diameter 400mm Undercut saw bore diameter f 22 mm

Condition: used, Year of construction: 2002, Functionality: fully functional, cutting height (max.): 295 mm, power: 15 kW (20.39 HP), saw blade diameter: 750 mm, overall weight: 1,200 kg, table length: 1,500 mm, table width: 1,500 mm, table height: 900 mm, worktable length: 9,000 mm, Rotating plate 270°, hydro-pneumatic inclination adjustment 90°-30°, pneumatic clamping cylinder left and right, pneumatic height and cutting device, lower panel of the machine stand with cleaning flap (dust and noise reduction), suction nozzle Celrev Ditied U Dnegt

Condition: used, Longitudinal circular saw Longitudinal circular saw Cross saw / longitudinal circular saw built in 1999 works from below for lengths up to 4.7 m Material thickness up to 110 mm also suitable as a traveling saw behind a production line Cgelrd Ujq E Ivto Dnet INFO! ! For such a new Flender circular saw flat motor 10 KW you pay 4700 EUR so more than at jöma for the whole machine

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Celof N Ngbord U Dnegt Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: new, - Closed and safe sawing area for more security by law mandatory saw-protection device - Safe working by moving handle for fixing the cuttings - Ball bearing, permanently smooth-running Steel sliding table - Robust and strong circular saw motor - Stable, torsion-resistant steel frame - Shock, scratch and weather resistant by high quality powder coating - Phase inverter on all 400 V models - Delivery completely assembled HRTS 701K - Direct drive - Driving device for easy transport Technical specifications: Dimensions and weights Working height 850 mm Table length 1400 mm Table width 850 mm Length approx. 1420 mm Width / depth about 860 mm Height about 1250 mm Weight approx. 149 kg drive Drive Direct drive Electrical data Recording power 5.2 kW Supply voltage 400V Phase (s) 3 Ph Current type AC Mains frequency 50 Hz sawblade Diameter 700 mm cutting capacity Table 230 mm Cgolrsvwf R Ded U Dnjt

Year of construction: 1991, Condition: used, - Grooving saw unit: controlled (on and off) Cgolrdeb Scc Dj U Dnet - Main saw unit - Note: This machine has been specially built for grooving and ripping drawer fronts. In general, panels can be grooved or split.

Condition: good (used), Year of construction: 1999, operating hours: 2,500 h, cutting height (max.): 160 mm, TOS SVITAVY Pwr 401 multi-saw, engine 55kW, cutting width 400mm, cutting height 160mm Colrdsv N Rv Nj U Dnjgt

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 450 mm, cutting length (max.): 6,200 mm, power: 15 kW (20.39 HP), saw blade diameter: 550 mm, total length: 8,100 mm, overall weight: 2,700 kg, height adjustment type: mechanical, type of input current: three-phase, motor voltage: 400 V, frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 160 mm, working height: 850 mm, type of motor: three-phase motor, worktable width: 450 mm, compressed air connection: 6 bar, warranty duration: 12 months, The basic model of the FLS technology is the FLS ECO 120. The saw is mainly used in small and medium-sized operations focused on various wood processing, but also non-wood materials. The FLS ECO 120 single-spindle saw significantly increases work efficiency and material yield (by 10-15%) and can process prisms, beams, prisms and large-area material. The input material can be plastered, dimensioned, formatted, cut to length and slats can be produced. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by one worker. The machine complies with the stringent occupational safety requirements of the relevant EC regulations and directives. The infinitely variable blade feed and stroke control guarantees a clean cut and high cutting performance. Thanks to the "ProLock" quick-release system, saw blade replacement is easy and, above all, safe. The saw carriage is equipped with guide and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure plate and the wooden adjustable stop ensure a firm fixation of the material during cutting and thus eliminate unwanted movement. The FLS technology is unique in its quick and easy adjustment via ergonomically positioned touch panel controls. Cut width values are entered manually or by using the basic Absolut program or the optional Chain and Optim programs. The cutting path is displayed on the material by a laser beam and then guided longitudinally by a sliding saw blade. Cjleubbuberd U Dnogt The FLS can be used to cut prisms, squares, beams and large-area material. The input material can be plastered, dimensioned, formatted, mitred and mitre cut, grooved or cut into sections and slats. Manufacturers of grout and solid furniture or staircases will find their own. The machine can also be used for cutting non-wood materials such as PUR/PIR panels, plastic materials, sandwich, aluminium or cement board.

Year of construction: 2018, Condition: as good as new (ex-display), Crosscut saw AS-600 Vorfürmaschine Incl. blade diameter 600 mm. Incl. Automatic minimum quantity lubrication. Incl. smooth lift and manual length stop. Machine can be visited, by appointment, on the spot. Cgjlrdjd A T Efe U Dnjt

Condition: excellent (used), Functionality: fully functional, Stromab TR600 crosscut saw Cutting width 600mm Cutting height 160mm Cgslrdsvzay Uj U Dnot Saw diameter max 600mm Saw diameter min 590mm Saw bore 30mm Main engine with a power of 7.5kw Saw rotation speed 2800r.p.m Total machine length 465cm CE certificate Extraction nozzles 2x100mm

Condition: used, Year of construction: 2011, machine/vehicle number: KK1/032231, SECOND-HAND CIRCULAR SAW MINIMAX SC/3W - CE RULES - 3 KW - Volt. 400/850 - SN KK1/032231 Cjlrd U Der Iycbjnegt - Year 2011

Condition: used, Year of construction: 2020, Numerically controlled squaring machine Main motor kW 5.5, rpm Table length mm 3200 Separate pre-cut motor 0.75 kW, 8000 rpm pre-cut shaft ⌀ 22 mm Saw blade diameter mm Main disc overlap 9 mm - 105 mm/70 mm Weight: 890 kg TECHNICAL DETAILS TO BE VERIFIED Cslrdov Ak T Us U Dnsgt

Condition: excellent (used), Year of construction: 2015, operating hours: 2,500 h, Functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 1,000 mm, We will sell a Paul KME2 1000 R edger. The machine worked for 3 years on 1 shift, has traces of use, mechanically it is OK. It passed technical inspection from the Paul company. Clearance 1000mm cutting height 120 control from the panel Cslrd Uev N Rv Aj Dnogt

Condition: new, Year of construction: 2024, Functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 600 mm, feed length X-axis: 6,200 mm, overall weight: 2,300 kg, height adjustment type: pneumatic, type of input current: three-phase, motor voltage: 400 V, frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 120 mm, working height: 900 mm, type of motor: three-phase motor, compressed air connection: 6 bar, warranty duration: 12 months, The KP 900 Automat is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27-30 m3 of pallet cross-section per shift (8 hours) or about 20 thousand pieces of blocks for pallet production, depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the material being processed, which is manually loaded into the machine. Basic cutting modes 1. Manual mode Each cut length is set by moving the material using the buttons on the panel, or by setting the length value on the control panel dial. Start the cut by pressing the button on the display. This method of use is suitable for single sequential cuts. 2. Automatic mode a) Set one cut dimension for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to this set value. When the cut is complete, the loader will go back to the preset value of the input material length. This mode is suitable for the production of pallet cubes. The advantage is the quick changeover between values when the input material changes frequently. b) Set the desired combination of cut dimensions for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to these length combinations. When the cut is complete, the loader will go back to the preset value of the input material length. Up to 10 programs with 10 lengths can be stored in the machine memory. Programs are very easy to overwrite, edit, insert or delete. Use this mode to achieve high material yields and is particularly useful in the production of cuttings for a wide range of packaging products. In automatic mode, automatic front and back trimming can be set. In the basic version, the saw is LEFT orientation, i.e. the material flow is from right to left. An automatic loading system is included in the basic configuration of the saw. It is a pusher device that moves on a precision linear rail with bearings. This design ensures long life of the linear guide and very precise positioning of the workpiece in the cut. Celrd Uoubbtko Dnogt The integrated side and top pressure ensure a firm fixation of the material during the cutting process, both to the work table and to the back support. This ensures that the cut is always precise, perpendicular and avoids unwanted material movement. The clear LCD touch screen allows easy and comfortable operation of the machine. The individual controls are clearly visible, do not tire the operator's eyes and provide a perfect overview. Maximum ergonomics and designed software ensure the operator complete control over the machine. A work table at the infeed before the cut allows the operator to conveniently sort and prepare the material, which is then moved to the loading area. This eliminates downtime in the operation of the saw and strenuous material handling. The table has a tilt of 8° and is equipped with a safety flap at its end to prevent accidental pushing of the material out of the operator's reach. The basic fixed table at the outlet behind the cut is two metres long and partly under the cutting area cover. The operator can remove the cut material in complete safety, without being endangered by any cuttings, chips or risk of injury from the cutting wheel. The inclination of the table is 8°.

Condition: new, Long-cutting saw LAS. Cgjlred A Tq Djd U Dnet Depending on the customer's requirements and specifications, we produce the long cutting saws with the appropriate saw blade diameters. We set individually the cutting area in direct cooperation with our customers to provide a fast and efficient editing. Optionally, we offer you the possibility to combine the machine with a matching length stop. MITRE facilities, cooling units and the appropriate extraction technology available on request.

Year of construction: 1978, Condition: good (used), Type - 35/4 Cutting height - up to 320 mm Cgslrd Ujil H Svj Dnet Cutting width - 60 - 360 m Feed - stepless, 7 - 35 m / min Feeder

Condition: excellent (used), Functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 750 mm, Schneider Circular Saw SLS 28 Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, glulam beams and various applications. Cutting height approx. 275 mm Rotary table rotates 135 degrees Pivots 90-30 degrees Cjlrdjv N Uxhe U Dnegt Handwheel tilts Motor power 11 kW

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 500 mm, length stop: 3,200 mm, worktable length: 3,700 mm, TECHNICAL DETAILS Engine power: 13.59 HP / 10.0 kW Cgolsvyqu Hord U Dnot Max. cutting height: 200 mm Max. cutting width: 1,250 mm Crosscut stop: 3,200 mm Format sliding table: 3,700 mm Max. circular saw blade diameter: 250 - 500 mm Circular saw table extension: up to 1,620 mm EQUIPMENT - Parallel stop: Yes, with digital display - LASER cutting line display: available - On and off switch: on the sliding table - Preventive Contact System (PCS®): available - Potential-free contact: for controlling extraction systems

Condition: new, Sawmill MTI AS-350-SA - Saw blade diameter 350mm (other sizes and models on request) - Positioning length infinitely adjustable up to 300mm (further lengths on request) - Cutting area (height x width) depending on the design - Optional with roller conveyor, smooth web, etc. Cgslrd U Dod Rhzqonot - Other accessories on request We would be happy to provide you with an offer tailored to your requirements

Condition: excellent (used), Year of construction: 1975, max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm Cgelrdeqwdw Ne U Dnet dimensions length/width/height 2140x1440x960mm weight 543kg

Condition: good (used), 5kW motor Ability to cut at an angle Cgolrd U Doqwdxuonet Solid cast iron

Condition: good (used), Year of construction: 1995, Functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension Celrjqwduxsd U Dnegt worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: good (used), Year of construction: 1990, Functionality: fully functional, power: 4 kW (5.44 HP), max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm Cgolrd Ueqwdwzo Dnjt dimensions length/width/height 2140x1440x960mm weight 543kg

Condition: excellent (used), Year of construction: 1982, Functionality: fully functional, power: 5.5 kW (7.48 HP), main motor 5.5 kW saw can be lowered up/down saw set at an angle of 45 degrees side carriage with aluminum guide Cgjloqwg Dwerd U Dnot table top 100×90 cm Maximum saw diameter 400 mm Belt adjustable saw rotation 3000/4000/5500 rpm