Used cutting machines for sale (79)

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Cedpfeiwbfusx Akqsrf Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Credpfxjy Edp Hs Akqjf Max. panel length: 3800 mm Main saw blade projection: 115 mm No of Grippers: 11

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Codpfx Akowuucisqerf Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: used, machine/vehicle number: 008348, Max. panel width: 4300 mm Max. panel length: 1600 mm Main saw blade projection: 125 mm No of Grippers: 5 Csdoyl Iiijpfx Akqerf

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm Codpfxeygtbmo Akqsrf No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm Crodpfx Aoxaudzekqsf No of Grippers: 11

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm Codpfxsy Nkygs Akqerf No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm Cedpfxou N Slij Akqjrf No of Grippers: 7

Condition: used, machine/vehicle number: 007538, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8 Codpfx Akouwzupsqjrf

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Crjdpfxox A Tk Es Akqef Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, machine/vehicle number: 005255, Max. panel width: 4300 mm Max. panel length: 2200 mm Cedpfxog E Tcxs Akqerf Main saw blade projection: 110 mm No of Grippers: 7

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Credou Rv Uqjpfx Akqef Panel Rotation Station: yes

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Main saw blade projection: 130 mm Csdpot H Twaefx Akqsrf No of Grippers: 7

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Cjdpfx Ajx A Tizekqsrf Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 9

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Crodpfx Aoiiiuyjkqsf Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes Crodpfxewuz Dye Akqsf

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Csdpey Nk Dfsfx Akqerf Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes

Condition: used, machine/vehicle number: 005552, Max. panel width: 2200 mm Max. panel length: 4300 mm Codpfx Aey Nktajkqjrf Main saw blade projection: 125 mm No of Grippers: 10

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Max. panel length: 4250 mm Crjdpjyg Edmjfx Akqef Main saw blade projection: 95 mm

Condition: excellent (used), Year of construction: 1991, machine/vehicle number: 1313, Intended Use The automatic high-performance longitudinal circular saw KMS is designed for precise finish and joining cuts. It features a robust, durable construction and is engineered for continuous industrial operation in wood, plastic, or metal processing applications. Machine Design - Sturdy, welded heavy-duty steel construction. - Motor protection switch with automatic star-delta start-up. - Carriage guidance via precision-ground round steel rails and ball-bearing rollers; rails are mounted on easily replaceable supports. - The entire carriage unit is positioned beneath the front machine table. Sawing Unit - Lowerable circular saw unit, electro-pneumatically lifted. - Cutting height adjustment manually via a threaded spindle. - Infinitely variable feed rate from 1–60 m/min, powered by a frequency-controlled motor. - Return speed constant at 60 m/min, independent of feed rate. - Cutting length adjustment for varying cut lengths via selector switch. Machine Table - Front machine table made from reinforced longitudinal beams, adjustable and mounted for stability. - Table surface constructed from profiled steel sheets with recessed grip handles. Crodort H Ddjpfx Akqef - Cantilevered width stop, seated and guided on three sides. - Spindle drive with fine adjustment via handwheel, directly readable scale. - Usable width: 400 mm (standard version). - Electro-pneumatically controlled fence rail with automatic retraction for unobstructed drop of cut material. - Rear machine table is narrow and can be swiveled downward electro-pneumatically for free fall during longitudinal cuts. Saw Blade and Extraction - Designed for saw blades Ø 400 mm, bore Ø 30 mm, mounting flange Ø 80 mm. - Maximum cutting height: 70 mm. - Integrated extraction duct, Ø 150 mm. Double Circular Saw Unit “DUO” - For pre- and post-cuts, consisting of two saw blades Ø 400 mm and two 11 kW (15 HP) motors each. - Total cutting length: 3200 mm. - Pressure beam with torsion-resistant construction and parallel guidance, stroke movement electro-pneumatically controlled. - Integrated finger safety contact bar.

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change Cjdpfxjrx S Uco Akqerf - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety Crjdpfxjyw Ndmj Akqjf - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Codpfoyw Ivhex Akqjrf Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels Crodpfsxraucox Akqof available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: good (used), Morsoe mitering punch, in good condition, immediately available. Cjdpeh Aka Iefx Akqsrf If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, subject to prior appointment.