Condition: excellent (used), Year of construction: 2019, operating hours: 4,500 h, Used Weber deburring machine in very good condition for sale. Can be inspected and tested under power. Available from approximately July 2025! Fgeb Hc Shjv Nqn Ejbob

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. Fobshnc E Ao Hc Shbjgb The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. Please contact us and we will send you an interesting offer.

Condition: good (used), Year of construction: 2016, operating hours: 715 h, Functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. Fgsb Hc Shov Tnfiebeb The machine is available for inspection and testing; it is live. Please contact us with any questions.

Condition: new, Year of construction: 2023, total length: 13,000 mm, total width: 8,000 mm, total height: 17,000 mm, workpiece weight (max.): 500 kg, overall weight: 600 kg, BMZ Manual Deburring Machine BMZ M1 Thanks to its vacuum table, the BMZ M1 allows for simultaneous deburring of multiple parts by hand. Two different brushes can be installed on the system, and changing the brushes is very quick and easy. Because the brush is positioned parallel to the table, it enables more even grinding. The system's motor weight is balanced, making it ergonomic for the operator. With the BMZ M1, you achieve maximum quality at a minimal cost. Fgob Hc Serp Dp Nohbsb Application Areas Edge Rounding Deburring Slag Removal Oxide Layer Removal Polishing

Year of construction: 2014, operating hours: 30,000 h, Condition: good (used), For sale: 1 piece used deburring machine / grinding machine Manufacturer: Peter Wolters Type: BD300-L YEAR OF MANUFACTURE: 2014 Operating hours: 2014 min. Workpiece width: 10mm Fgsb Hc Shoqy Iu Hjbeb max. workpiece width: 270mm Siemens PLC control Incl. extensive accessories: various brushes, grinding wheels, 2 x conveyor belt, toothed flat belt, 2 protective wheels For further technical data see pictures. Machine can be inspected at our warehouse in 09599 Freiberg. Price on request.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29 h, General Data Measurements width 1600 mm Measurements depth 1930 mm Measurements height 1550 mm Machine weight 2200 kg Main Drive Spindle motor power 15 KW Additional Equipment Included are the corresponding extraction system and the onboard tools. Electrical schematics are also available. Fgebov Eh Ize Hc Shbjb This ERNST PLUTO EDD deburring machine was manufactured in 2013. Ideal for smoothing out rough edges and surfaces, it ensures consistent results in metal finishing processes. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2017, Used machine from 2017, very good condition! Feb Hcov Dwbuo Shbjgb Can be inspected and tested under power.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, working width: 600 mm, feed rate X-axis: 8 m/min, Working area: Max. working width: 600 mm Table opening: 0.8 - 100 mm Minimum workpiece dimensions for vacuum: 50 x 50 mm Frequency-controlled sanding belt: 5-15 m/s Frequency-controlled brush speed: 6-17 m/s Frequency-controlled feed speed: 0.5 - 8 m/min Total power (without options): 12 kW / 32 A Required air pressure: 6 bar Extraction: Wet separator extraction unit: B 2000 series Motor: 3 kW, 400 V 50 Hz, IE3 Max. air flow: approx. 4,200 m³/h Fgob Hcjwa Dabs Shbsb Max. vacuum: approx. 3,100 Pa Filling: Automatic via solenoid valve Dimensions: 850 x 850 mm 850 x 3,315 mm Atex: Zone 2 Filter: with HEPA post-filter Connection: with duct for extraction Equipment / Accessories: Carpet cleaning brush: Rotating under the conveyor carpet Front table: Extended version

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Fjb Hc Shjt D D Nzsbogb Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: new, Functionality: fully functional, working width: 1,300 mm, warranty duration: 12 months, workpiece width (max.): 1,300 mm, RWT deburring machine possible configuration Four-station machine: 1. deburring with contact roller grinding belt 2. cup brush for oxide layer or slag removal 3. cup brush for edge rounding 3. finish sanding via contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) - removes burrs that protrude above the surface of the material, removes scale and corrosion from the surface Planetary disk brush unit (D) - rounds the edges, creates radii and removes the oxide layer on the sides after laser cutting. Rotary unit (A) with finned brushes - deburring and edge rounding without foil removal, surface uniformity. Brush unit made of abrasive fleece (B) - pre-cleans and polishes surface material These deburring machines are used for the following tasks: deburring parts after laser cutting - deburring edges, removing oxide and finishing the surface Deburring of parts after plasma cutting - slag removal, rust removal, removal of material overflows, edge rounding and surface finishing. Deburring of parts after punching - removal of sharp edges, edge rounding and final surface finishing. Feb Heudal Djc Shbegb Deburring of parts after water jet cutting - deburring and rounding of edges, removal of marks after water jet cutting and final surface treatment. Deburring of stainless steel parts covered with foil - deburring and edge rounding without foil removal. Main advantages of the machine: Modular system - we design the machine exactly to your requirements High-quality and uniform deburring of all edges of the product Processing of very small workpieces with the magnetic or vacuum table Very easy operation of the machine thanks to the Schneider Electric touchscreen Grinding, deburring and finishing with one machine Very quick change of tools and rigid machine frame In view of the large number of possible machine configurations, we recommend a personal consultation and free grinding samples at our premises, which we use to assess our customers' requirements and then propose the most suitable machine configuration for the production in question.

Condition: excellent (used), Year of construction: 2010, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: G2372-13, working width: 900 mm, working height: 1,190 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, The machine has been used little and has only 10 operating hours! TECHNICAL DATA Area of application: Grinding, removing, and calibrating workpieces Working width: 900 mm Grinding belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Raised table opening: up to 250 mm Constant working height: 1,190 mm Speed and feed rate Fsb Hc Shswa Ubcobsgb Speed of units: 11 and 22 m/s Frequency-controlled feed rate: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Grinding equipment Grinding belt units: 2 Motor: Two-speed motor Contact roller height adjustment: Handwheel for adjusting pressure or belt thickness Height adjustment display: Electronic digital display of the feed table height in mm Motor for contact roller unit: for Finish Sanding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total Current: 62 A Power: 31.68 kW EQUIPMENT - 2 sanding belts - Rubber-coated steel rollers - Dust extraction

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Fob Hc Sswa T Saohbjgb Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100

Condition: ready for operation (used), Used Timesavers deburring machine in good condition. Working width: 1350 mm. With a wide belt sander and a rotary brush unit. Fjb Hc Sjwfxpnehbegb Can be inspected and tested under power.

Year of construction: 2016, Condition: ready for operation (used), A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible. Fsb Hcov Sufys Shbjgb

Condition: used, Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine Feb Hcevwd Nfj Shbjgb - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: excellent (used), Year of construction: 2005, Metal sander COSTA MOD. MA CCC 1150 Year of construction 2005 CE. Complete with nr. 3 abrasive belts. Sheet metal passage: mm 1150. Fgjb Hc Sev Uqb Ashbob Power: 40 kw. Working machine.

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg Fob Hcjt U R Swe Shbsgb max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 624 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: good (used), Min. Pipe length: 100-1800 mm Fgebeq U Rcce Hc Shbob The system was previously used for deburring cut pipes!

Year of construction: 2001, Condition: excellent (used), Technical data / Standard dimension: Working heights between 650 to 1800 mm per grinding unit Fjboign Ide Hc Shbsgb Oscillation angle 0° to 90° L/R – adjustment by using 2 grinding units up to 2200 mm Controls Siemens Motor power 3,0 kW Grinding belt speed up to 25 m/s Pneumatical grinding belt tensioning

Condition: like new (used), Year of construction: 2025, Turbo-Line 120- centrifugal finishing machine With round working container, vertical lamellar wall segments and rotating plate-shaped base with adjustable speed. The compact machine is detachably mounted on a base frame. In order to achieve a long service life, the working container and base are each to be equipped with a minimum 22 mm thick PU coating. The 120L container can be filled with 55 L. (responds to about 75 kg.) product/compound per batch, depending on the shape of the workpieces. The Turbo-Line 120B is suitable for deburring and polishing a wide variety of metal, composite or plastic parts. Fsb Hcefhw Rwo Shbegb Machine data: Turbo-Line 120B Engine power: 4.0 kW Machine capacity: 120 L Device dimensions L x W x H: 1740 x 900 x 1470 mm Work bowl Ø: 640 mm Working container lining: PU, 24 mm., Yellow Weight: 590 kg Connection: 3x400 V, 16 Amp. CEE Unit colour: RAL 7015/7035 Touchscreen5" colour display The machine can be inspected, tested and accepted on site under power.

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Connected load: 2.4 / 3.7 kW Fgob Hc Shov Dv Awsbob Space requirement: approx. 1.0 x 0.5 x 1.2 m (L x W x H)

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Fjb Hcod Ixads Shbogb Weight (kg) 5000

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Fgobsd Ixbze Hc Shbjb Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Fob Hc Ssd Ev Upehbjgb Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Fsbed Evcwj Hc Shbsgb Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200