Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. Dkjb Eujudb R Ijf Sgel incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: used, Year of construction: 2011, Functionality: fully functional, working width: 900 mm, Timesavers' deburring machines from the 22 series have been the standard in the metal industry for more than forty years. Thousands of these economically attractive deburring machines are being used worldwide for the deburring and finishing of small parts. Djb Eeu U Ifgjuf Sgjkl

Year of construction: 2000, Condition: ready for operation (used), A Plakoma brushing and deburring machine is available. The machine was used to remove flame burrs and to clean the surfaces of metal products. It has a stop system and positioning. Including a gantry crane with a load capacity of 16 tons. Individual components of the machine were overhauled in 2008. Documentation available. On-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026. Dkjbouhqcno Euf Sgol

Year of construction: 1997, Condition: used, Brush deburring machine RSA RASAMAX MONO for brushes Ø 250 mm and approx. brush width 80 mm speed range 1500 / 3000 rpm operating voltage 380 volt total power requirement 2,0 / 3,0 kW Weight approx. 180 kg for deburring of sheet metal with contours for material thickness from approx. 1,0mm to 6,0mm. Brush speed 2-stage 1500 or 3000 rpm Machine is located in 71334 Waiblingen-Beinstein and can of course be inspected, please contact us. Debjimbq Do Euf Sgokl

Condition: as good as new (ex-display), Year of construction: 2007, operating hours: 42 h, Functionality: fully functional, total width: 1,000 mm, material thickness: 20 mm, Equipment: cabin, Brush deburring machine for deburring, grinding and removing oxides from sheet metal after laser burning. manufacturer - LISSMAC Germany; type - SBM-B 1000; year of manufacture - 2007; mileage - 42 hours; Dksbepm Nlzs Euf Sgsl working width - 1000 mm; max. thickness of material - 20 mm; brush drive power - 4 x 4,8 kW; CE - has; DTR - has. Machine connected to power supply, ready to check.

Year of construction: 1979, Condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm Dkob Ejhg Nuiouf Sgol workpiece length: 150mm Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Weight: 2t

Year of construction: 1998, Condition: used, machine/vehicle number: RM48/3189, Item number: MA977 Manufacturer: RAS Type: Rasamax ST Duo Year of manufacture: 1987 Machine-No.: ST-Duo 1055 Length [mm]: 650 width [mm]: 600 height [mm]: 1200 Djb Euf Secwyifegokl weight [kg]: 190 Connected load: 380V / 1,4KW Number of tool stations [pcs.]: 2 Gear [rpm]: 1500 / 3000 accessories: base cabinet / roller conveyor / spare grinding wheel

Condition: used, Year of construction: 2016, operating hours: 851 h, Functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, sheet thickness (max.): 50 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Dkeb Esucw Dzeuf Sgjl

Year of construction: 2007, Condition: ready for operation (used), Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible. Dob Eujudy S Dof Sgekl

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, working width: 2,000 mm, sheet thickness aluminum (max.): 20 mm, Salvagini B3 Maximum bending length: 2000 mmMaximum force of the material to be bent depends on the length of the bend and the tools used, according to the calculation table for the bending press. Dkeb Eufjup T Tto Sgjl

Condition: excellent (used), Functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. Dksb Euf Ssv Awrwegjl + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: new, Year of construction: 2025, pipe diameter: 48 mm, input voltage: 400 V, power: 0.55 kW (0.75 HP), At Duralbend, we are manufacturing high-quality deburring machines designed to meet the needs of various industries. Deburring is a crucial process for removing sharp edges and imperfections from metal tubes, ensuring a clean, smooth finish. Our deburring machines, capable of handling tube diameters up to 48 mm and 60 mm, are perfect for industries like automotive, furniture, and construction. Deb Euevx D Ecsf Sgekl

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, working width: 200 mm, sheet thickness aluminum (max.): 100 mm, total length: 1,530 mm, total width: 670 mm, total height: 2,130 mm, workpiece weight (max.): 30 kg, overall weight: 700 kg, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, sheet thickness steel (max.): 100 mm, working height: 1,100 mm, input voltage: 400 V, sheet thickness (max.): 100 mm, warranty duration: 6 months, workpiece width (max.): 200 mm, workpiece length (max.): 2,000 mm, grinding width: 200 mm, height adjustment type: mechanical, Equipment: documentation/manual, Q-fin specializes in the design, manufacture and sale of equipment for deburring, grinding and metal finishing processes. Deb Eufjvdkfao Sgskl The Q-fin F200 double-head machine was developed in response to the needs of customers who require processing of the smallest workpieces with a width of widths of up to 200 mm. As standard, this device has a brush height adjustment system designed by Q-fin which makes it more flexible and user-friendly. The F200 deburring machine is a device 2 with two stations: an abrasive belt and a brush with vacuum clamping on the workpiece transmission belt . It allows precise machining of even the most demanding workpieces while achieving the desired end result. The brushes, oscillating along the surface of the material with the appropriate offset, allow to obtain the best grinding result (directionless finish with gently rounded edges). Brush height is independently adjustable to achieve the desired finish quality. The speed of the brushes is infinitely adjustable. The result of this solution is a high-quality finished surface, rounded edges and high productivity.

Condition: new, Year of construction: 2023, Functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, sheet thickness (max.): 102 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Djb Eeucw Rbsuf Sgokl The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Year of construction: 2007, Condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Dksb Eustul N Djf Sgol

Condition: excellent (used), Year of construction: 2025, Timesavers Series 10 Manuel Ginder Dobefhb N Sj Euf Sgekl The machine is a demonstration machine which was used occasionally for demonstrations. Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Speed infinitely variable. The machine is in our warehouse and can be viewed at any time under power, tested and accepted.

Year of construction: 2005, Condition: excellent (used), For sale is a Lissmac SBM-B 1000 in very good condition. In addition, reserve brush belts are included in the price. Operating voltage: 400 V Motor power: 4x4,8 kW weight: 1550 kg Power consumption: 63 A passage width: 1000 mm sheet thickness: 1-20mm Dkjb Euf Ssmf Ti Nsgsl Sheet size min.: length in throughput direction: 150 mm width in throughput direction: 100 mm Speed: 1400 rpm

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Dksbot Dpxbe Euf Sgel Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Year of construction: 2002, Condition: used, diameter 180 mm workpiece length 0 mm work piece width 1350 mm total power requirement 65 kW weight of the machine ca. 7.500 kg dimensions of the machine ca. m Dob Est Hw Shouf Sgekl

Condition: reconditioned (used), Year of construction: 2011, Machine operating hours: 1023 h Max. passage width: 600 mm Processable sheet thickness: 1-120 mm Working height, constant: 850 mm Voltage: 400 V (50 Hz) / 480 V (60 Hz) Rated current: 30 A Rated power: 17 kW Protection class: IP 42 Infinitely variable feed: 1-4 m / min Depth: 1930 mm Width: 1600 mm Height: 1550 mm Machine weight approx.: 2200 kg Deb Euovgbpnof Sgskl With the Pluto, you can rely on a compact machine for deburring oxy-fuel and plasma-cut parts. Equipment : - Tolerance and distortion tolerance up to 6 mm - Durable steel wire brushes for edge deburring - Magnetic clamping device across the entire working width - Heat-resistant conveyor belt made of chrome leather

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, working width: 1,100 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, sheet thickness steel (max.): 50 mm, input voltage: 400 V, sheet thickness (max.): 50 mm, nominal current: 18 A, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. Dkjbotzfnto Euf Sgol The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Dsb Eufevyhtte Sgjkl Max. part height: 80 mm Min. part height: 15 mm Speed: 1 - 10 m / min (adjustable) CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions If you have more questions, we will be happy to answer.

Year of construction: 1989, Condition: excellent (used), Stock number: 2939 Manufacturer: Held Year of manufacture: 1989 Machine number: 3356 Type / Model: E90 Stop surfaces: 800 x 50 mm Speed: 8,400 rpm Connection: 1.1 kW Accessories/equipment: Condition: good Weight: approx. 0.1 t Footprint: 550 x 500 mm Djb Eeu Un N Ejuf Sgskl Dimensions: 1,000 x 500 x 1,000 mm

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Djb Euf Set Hw Iijgokl total power requirement 45 kW weight of the machine ca. 5.500 kg

Condition: good (used), Vibratory mill - Vibrating mill Vibrating / deburring / mixing machine Stock number: 2805 Dsbjrcf Hio Euf Sgskl Manufacturer: Wagner Year of construction: 1994 Type: R 1000 - 09744 - 0 Number of stations: 8 Container size: 5.6 l Application: colors were mixed in the containers, it is also possible to deburr small parts Dimensions: 1,600 x 800 x 1,100 mm Weight: approx. 1 t