Used Destacking device for sale (65)

Condition: used, Inclined elevator Lift for the 1st floor transport boards to 1 storey height Fgslq Heq Edyre Agfob

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) Fgeled Rg Dzjq H Agfeb N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: used, Universally applicable Sicko ASF stacking system with high lift truck for use as mechanization behind planing machines or similar processing machines. workpiece height: max. approx. 10 cm Fgelsvkfwkoq H Agfjb workpiece length: approx. 90-200 cm

Year of construction: 2024, Condition: as good as new (ex-display), Weinig Stacker for long boards Min length 1500mm Max Length 6000mm Machine is under total rebuilding and will be like new. All hydraulic Systems are changed to Electric motors Folq Hsunaw Ne Agfegb New control panel sand blasted and repainted. Machine comes with brick stacking option Work in progress New photos as i get along.

Condition: good (used), Lenght with arm at 0 point 0 - 3400 mm Fgslq H Agsv Nzgljfsb Lenght with arm max opened - 4100 mm Width 1400 mm Weight 1000 kg

Condition: used, Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 6441775, space requirement height: 3,150 mm, space requirement length: 5,000 mm, space requirement width: 3,800 mm, For sale is a fully automatic stacking system from the renowned manufacturer Michael Weinig AG. This machine is a high-performance stacking system that has easily stacked 15 boards per minute for us. The system can certainly do much more, but that would have to be tested. The distance between the elevator stands can be easily adjusted using handwheels from under 1m to a maximum of approx. 3.5m. We always had the distance set to 2.5m, as we mainly stacked 4m of goods. I estimate the maximum board width to be 300mm; the maximum board length is currently 4.35m. But that could be increased relatively easily. The maximum layer width is approx. 1.3m and the maximum package weight of 4000kg is more than sufficient thanks to the very solid scissor lift table. The machine can also stack crosswise in layers or you also have the option of automatically inserting slats. The following program can be created on the display: Fgslqsvkx Dks H Agfsb Number of boards per layer Number of layers per package Automatic insertion of strips after XXX layers Sold due to lack of space. Circuit diagram and printout of the SPS / PLC program is available. For more details and dimensions, please see the photos, or simply ask. There is also a storage system for sawn timber packages for sale, see my other advertisements. Demonstration possible by arrangement Dismantling, loading and transport should preferably be organized by the buyer, but can also be carried out by us for an expense allowance. Forklifts and various aids can be made available by arrangement. All information and dimensions have been provided to the best of our knowledge and belief, but there is still no guarantee of completeness and accuracy! The sale is as seen, without guarantee, return or similar. Subject to prior sale.

Year of construction: 1988, Condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m Fgslq Hjvbtpe Agfob -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: excellent (used), LOADER (SINGLE-CAGE) Vacuum system with its pump Top holding bar deplacement (pivoting) of 180° Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting In-side lifting table, surface with motorized-rollers Front-side sliding door (metal grid) to introduce the stack of the panels Separated electric and command panel Outside rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), Working capacity (cycles/min): 12-15 Fslq H Aged Tywgofjgb Min/Max panels thickness mm 10 - 40 Min dimensions of the panels mm 250 x 320 (estimated) Max dimensions of the panels mm 1200 x 3000 Total installed motor power KW 11

Year of construction: 2024, Condition: new, The Unicraft SHT 2000 hydraulic scissor lift table offers a reliable solution for your lifting projects, e.g. for manually feeding a planer or sawing entire stacks of wood. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and user-friendliness and allows you to lift heavy loads safely and efficiently. With its table height of max.: 1,010 mm, the Unicraft SHT 2000 is the ideal choice to improve your workflows and protect the machine operator's back. Capacity: 2.000 kg table height min.: 190 mm Fgjlq H Agjnzh Hfefeb Table height min.: 190 mm table height max.: 1.010 mm tabletop: 800 x 1,300mm table surface: 800 x 1,300 mm cable length: 3 m security standard: EN1570 safety standard: EN 1570 drive: electro-hydraulic engine: 0,75 kW State: New with warranty

Condition: good (used), Year of construction: 1998, Stacking machine from pallet Fgelq H Agerc Drbsfob

Year of construction: 2001, Condition: ready for operation (used), Stacking unit consisting of: Fjleh Icbqeq H Agfjgb Multiple crosscut saw with 4 saws manually adjustable automatic stacking machine paternoster stack length 1,5 - 6,10 m stacking height 1,2 m stack width 1,2 m also 2 different lengths Without the heavy duty rollers All dimensions are approximate Plant is immediately available, already dismantled

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Fgjlq Hjv Hp Tnj Agfeb

Condition: new, Year of construction: 2025, Functionality: fully functional, Form a layer from boards for stacking, putting layers on other, and form a pack, with/or without sticks. Size of pack - 1200x1200x2000-6000. Size of boards - L 2000 – 6000 mm, T14 – 100 mm, W 50 - 270 mm Packing speed max - 14 row/min. Lifting capacity max 5,5 tons Folq H Agev Dh Npofsgb NORD electric motor for chain drive 0,75 kW, 400 V, 50 Hz, with brake, for board separator NORD electric motor 1,5 kW, 400 V, 50 Hz, with brake, for lift NORD electric motor 5,5 kW, 400 V, 50 Hz, with brake. Dimensions of equipment – H 1850, W 3200, Total lenght 5350. The price includes equipment with engines and pneumatics. It is possible to install different electric motors with other speeds, as desired and needed by the customer. (Additional costs may be applied) The price does not include electricity installation and automation, delivery and setting up. The offered equipment packs without sticks. We can also offer optional installation of this equipment (if necessary) – Sticker cassettes (sticker size is customizable), price for one “cassette” – from EUR 1900,00/pcs. If the customer needs the sticker cassettes, then the additional cost is the installation of the frame - EUR 900,00. We are using following elements in producing line: 1. NORD motors and reducers 2. Pneimatic components FESTO 3. Equipment is manufactures according to directive 2006/42/EB concerning the CE marking, and will be supplied with the statutory A/B declarations.

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Fgolqegvpn Is H Agfsb Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) Fgslq Hod Tyvxj Agfjb - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Fgjlq H Aged Siydsfob Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Fjlq H Aeflc T Sjgfogb Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump Fjlq Hocggy Sj Agfogb - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Fgslq Hod Rg Dpe Agfsb Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Fgolq Hofi Tg He Agfsb Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Fjlq Hsl Hycwj Agfogb Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: JZ1030) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables Fgelq H Aol Hyfcsgfsb N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Fgslq H Aec Ux Tmogfob Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: excellent (used), DOUBLE LOADER, (DOUBLE CAGE) CE mark Composed of 2 single loaders (one at right and the other at left of the central rollers table) - Motorized rollers table (between the two single loaders) - Built-in electric cabinet and PLC command panel Folqsbgcgge H Agfogb - Total installed power KW 16 General features of each loader: - Vacuum system - Top holding bars deplacement of 180° (horizontal sliding movement) - Horizontal bars for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (metal grid door) Working capacity (cycles/minute) 15 ca. Workpieces thickness (min/max) mm 12 - 60 Minimal workpieces dimensions mm 240 x 240 Maximal workpieces dimensions mm 1200 x 3000 Total installed powe Kw 16 x 2

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Felec Ux Tljq H Agfsgb To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500