Used destacking device for sale (63)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Cgsdpfx Aaevvuzcsaer Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: VM-WO-250-90-0-2-AAM00064R, total length: 1,600 mm, load capacity: 250 kg, throat depth: 650 mm, Schmalz plate vacuum lifter, original packaging, year of manufacture 2024, with two suction pads, maximum plate load of 250 kg. Boom arm swivels 180°, up to 3500 mm. Suction plate design: transverse orientation. Suction pad length: 550 mm, width: 200 mm, quantity: 2 pcs. Accessories: Spiral hose for compressed air supply: 2500 mm, compressed air supply length to crane: 12 m, number of hose connections: 2 pcs. Weight: 0.00178 kg. Customs tariff number: 84289090. Country of origin: Germany. Cjdpfx Aeycva Rsaaogr

Year of construction: 2001, condition: good (used), functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Cgsdpfxsv S Hfxs Aaajr Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: used, Height of the whole 320cm Arm length 350cm 360° manual rotation Suction cup gantry 220cm/120cm Cjdpfx Asw Dnnqeaaogr Adjustable in length and width 8 suction cups with a diameter of 30cm Maximum lifting height +- 140cm Minimum ground clearance +- 10cm Lifting capacity 175kg Electric rise and fall Manual rotation 380V

Year of construction: 2007, condition: used, Extra-flat lifting table Load capacity 1250kg 2 units available Cgsdpowfh Tcjfx Aaaor 380V

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Cgodpfouzht Tex Aaaer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Cedpfx Aev Hp Tnjaaegr

Year of construction: 2026, condition: new, functionality: fully functional, I´m offering brand new stackers incl brand new belt conveyors aas well to go with the stacker New design New Program New control system Sew Motors for Sweeper, Length adjustment and Lift Sweeper cycle time 0,5 sec Wood Stack for boards from 450mm to 3000mm. With brick, zigzag and normal stacking. Sticks can be added as an optional. Cgedpfsx Rdwzjx Aaaor Technical info: Board length 450-3000mm Width 50-200mm Thickness 16-100mm Board weight max 15 Kg Layer weight max 100 Kg Pack size 1200x1200 ( Max 2000 Kg)

Year of construction: 2026, condition: new, I´m offering brand new stackers One is under construction, Building time Ca. 3 Month New design Cjdpfoyk H Ihsx Aaaegr New Program New control system Sew Motors for Length adjustment and Lift Servo Motor for Sweeper, cycle time 0,3 sec Wood Stack for boards from 450mm to 1500mm. With brick, zigzag and normal stacking. Sticks can be added as an optional. Technical info: Board length 450-1500mm Width 50-200mm Thickness 16-100mm Board weight max 15 Kg Layer weight max 100 Kg Pack size 1200x1200 ( Max 1500 Kg)

Condition: like new (used), - machine in stock - after the technical review - very good condition - stacking wedge stacking in one cycle possible   TECHNICAL SPECIFICATIONS: elements length 3000 mm elements width 1300 mm element height 1600 mm element centering number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic lifting of material 1.5 kW pump motor 1.8 kW arm motor Cgodsfg Iqgopfx Aaasr number of cycles 12 / min    number of pickup rollers 48 roll height from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3 Cgedpfx Aaed Siydeaer

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables Cjdpsflc T Sjfx Aaajgr OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Cgodpfx Aed Rg Dzoaajr Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Cgodsd Rg Dpopfx Aaajr Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) Cgedpfx Aaocggy Soajr - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Cgodpfegvpn Iex Aaaer Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Cjded Tyvxopfx Aaaegr - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Cgedpfxst Ty A Ae Aaaor Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Csdpfxsc Ux Tme Aaaegr Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel Codec Ux Tlspfx Aaajgr 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Year of construction: 2001, condition: good (used), functionality: fully functional, machine/vehicle number: 057, Length: 4.00 m Cgedpfx Asxc Em Eeaajr Width: 4.20 m Height: 1.90 m Voltage: 380 V

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-09-4837, Equipment: type plate available, The automatic warehouse is fully operational; it is possible to visit the branch and evaluate its operation by prior appointment. Cedpfoxrlbzjx Aaaegr

Year of construction: 2012, condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Cjdpfx Aajv Rpxfjaegr Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: excellent (used), ATLAS scissor lift table, lifting capacity 4 t TECHNICAL PARAMETERS: German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm Cedpfema Ekasx Aaaogr height of the folded table 450 mm pump motor power 4 kW table weight 1500 kg

Condition: excellent (used), BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and correction system Length measurement: integrated Width measurement: integrated Cgodpfx Aox Nf Ilsaaor Automatic rotation correction: available