Condition: used, machine/vehicle number: 007176, Type of edging: Thin edge, Thick edge Cgeb Eertuqne Nlm Hst Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: new, Year of construction: 2023, MACHINESEEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. ----- New machine Year of manufacture 2023 Equipment and technical specifications: ARTEA 1030 BASE MACHINE Extendable workpiece support, 500 mm spacing Additional rigid workpiece extension, length 3080 mm Edge Control BC 15 with 15.6" touchscreen Cgob E Nlovxxtzjm Hot (Visual Setting mode) LED machine lighting for the processing units FG101 jointing unit with 2 diamond milling heads MG101 edge feeder Glu Jet GJ101 adhesive application system (2.3 kW, 50 Hz) Storage compartment for 1.4 kg cartridges (4 cartridges) GLU JET collection container Automatic reloading function KA101 trimming unit (50 mm) DW101 pressure unit Trimming, single-motor, linear guide FR101 multifunction trimming unit Flush 5 mm, R 2 mm Corner copying unit FF101, single-motor, linearly guided, 45 mm Scraper unit ZK101 Chip collection box Surface scraper FK101 Buffing unit SW101 Spraying device TR101 for the inlet and outlet areas Horizontal spraying device GM101 after the printing unit Availability: Short term Location: Hochheim

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement Cgsb Ejwcm Dbs Nlm Hst surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: like new (used), Tempora F600 gluebox edge banding machine well equipped, units controlled from the panel possibility of testing before purchase Initial milling cutters PUR glue station, Tempora glue box glue station glue application by roller, replaceable glue tank pneumatic preliminary guillotine pressure rollers adjusted from the panel ready-made cutting saws, adjusted from the panel top-bottom milling unit adjusted from the panel corner trimming unit adjusted from the panel R1-R2 profile scraper adjusted from the panel flat scraper switched on from the panel polisher anti-adhesive fluids max. element height 60mm max. veneer thickness in a roll 3mm feed 10m/min Cgjb E Nlmowdgvao Het Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm touch screen year of manufacture 2023 Used machine in like new condition, only 80h of work

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Cgebsvkdtwo E Nlm Hst Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: excellent (used), Year of construction: 2012, Stefani Evolution C double-sided edgebanding machine Year of production: 2012 Technical condition: very good The Stefani Evolution C is designed for precision veneering of straight and profiled edges of furniture panels made of various materials, such as particleboard, MDF or plywood. Thanks to its advanced features and high quality workmanship, the machine provides excellent results in the production of office furniture, kitchen furniture, bathroom furniture and other home furnishings. Working width max: 3200 mm Working width min: 225mm PC control Cjb Eeu U N Ags Nlm Hogt Stefani Winedge plus software v06.14.000 Longitudinal machining Transverse machining

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, edge thickness (max.): 10 mm, overall weight: 1,980 kg, height adjustment type: electric, Biesse Type Akron 440 Year of manufacture: 2007 Noise rating according to manufacturer: 88 dB (A) Rated power: 13 kW Extraction capacity according to AUVA: 565 m³/h Technical specifications: - Edge thickness from 0.4 - 10 mm - Feed speed 12 m/min - Max. edge banding height 13 - 60 mm - Release agent - Jointing unit - Edge magazine - Preparation for PUR adhesive - Trimming unit, pivoting 0-15° - Pivoting bevel/radius unit RS-501 - Profile trimming unit Cob E Nlmjwahhps Hsgt - Radius scraper RBK 502 - Flat scraper RCC 701 - Buffing unit SP 501 - Electric height adjustment - Total connected load 13 kW - Machine length 4200 mm

Condition: ready for operation (used), Year of construction: 2003, This HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander was manufactured in 2003. Consider the opportunity to buy this HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander. Contact us for further details. Cgobev Nb A Tj E Nlm Hjt Application Types Edge Banding

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: ah/006357, Perfect glue line and versatility of use with the new SGP glue pot (Smart Glue Pot) and the PU BOX L pre-melter. Surprising finishing quality with the AirFusion+ technology that allows edge banding without using glue. The simply perfect edge banding machine for the industry that needs to continuously produce numerous panels, even different ones. Cjb E Nlmowf Iw Us Hjgt

Condition: used, Year of construction: 2001, No. 3210 Ceb E Nlmjv Naxte Hsgt Edge banding machine Ott Pacific V 6 - F Used, year of construction 2001 Hot-melt adhesive hot-cold process Application roller with synchronized and counter-rotation Adjustable infeed ruler 0 - 12 mm Milling 0.2 - 6 mm Workpiece thickness 8 - 42 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Compressed air required 6 bar Feed speed 12 m/min Aggregates: Joining (pre-milling) 2 x 1.5 kW Fine milling machine, flush chamfer 0° / 15° / 30° / 45° (2 carbide insert cutterheads) Fine router, radius R2 - R5 (2 carbide insert cutterheads) Scraper, automatic feed (2 carbide blades) Corner rounding AR-2 (2 carbide insert cutterheads) Edge cleaning (2 oscillating brushes) Transport dimensions approx. 5300 x 1300 x 1250 mm LWH Weight approx. 2200 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, Functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 750 W, type of input current: three-phase, tank capacity: 1 l, Automatic edge banding machine with chain feed and pre-milling unit Sample machine built in 2022 Cob Ejwa Ag To Nlm Hjgt Equipment: Touch ME "7" screen control Glue container quick-change kit Multifunctional trimming unit Radius scraper unit Surface scraper unit LED interior lighting

Condition: used, Motor power: 7.5 PS/HP (5.5 kW), year of manufacture: 2007, edge thickness: 0.4-5 mm, motor voltage: 3x 400 V, motor frequency: 50 Hz, suction connection diameter: 120 mm, chain feed: 9 m/min, mitre saw unit: Yes, flush and radius milling unit: Yes, polishing unit: Yes, 14 A milling motors, mitre saw 200 Hz, glue unit, workpiece thickness 1060 mm, pressing unit, guillotine shears, scraper unit, pull-out frame with rollers Cjb E Njvwl Euelm Hsgt

Condition: good (used), Year of construction: 2012, Functionality: fully functional, workpiece height (max.): 60 mm, year of last overhaul: 2024, e-Motion control system with 10.4" color touchscreen, built in 2013, mileage 29,000m, Cgsb E Nlowdr Hkem Hst last serviced in December 2024 - including circuit board replacement 2nd glue pot Nesting guide shoes

Condition: not inspected (used), Year of construction: 1997, Automatic edge banding machine Cob E Nlmswfw Rde Hjgt Gluing group rectifications trimming rounding spindle moulders finishing groups

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description with hot melt adhesive indication on the workpiece for edge material up to 3 mm 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit, maintenance-free, coated glue pot, HF - trimming station (16,000 rpm) for front and rear edge overhang, HF - trimming station (16,000 rpm) with interchangeable plate cutter (combined version) and fine cutter adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged Control panel, double roller top pressure beam, unit viewing window from the rear of the machine and operator side, PLC control including touchscreen. Technical data: - Feed speed 10 m / min. - Panel thicknesses from 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point - pneumatic cutter adjustment 1 piece Switching radius - flush / chamfer for the combination milling stations The changeover to chamfer or flush is done manually by flipping the stop flap in the machine. Cleaning station (buffing) 1 piece Corner rounding cutter 1 piece including combination tool and pneumatic adjustment chamfer / radius Maximum workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 piece including pneumatic excavation device Radius R 2.0 mm Surface scraper 1 Unit with pneumatic application control. Glue station change system including a second glue pot and downward glue outlet. 1 unit for quick color changes. Grooving unit horizontally mounted in the edge. 1 unit including pneumatic lifting device and grooving tool. Separate extraction system for the joining unit. 1 unit directly mounted on the joining unit, vertically upwards, d=80mm. For optimal extraction performance, highly recommended from AKV 3005 DK-F. Ball bearing for corner rounding cutter 24.1mm. 1 unit. Ball bearing for corner rounding cutter 24.2mm. 1 unit. 0.37 kW interchangeable motor for corner rounding cutter. 1 unit with quick-change device including radius cutter R 1. Interchangeable spindles (1 set = 2 units). 1 unit. 1 set of quick-change motors for longitudinal processing, top and bottom, including tool R 1. Compressed air consumption: 100 - 150 l/h. Cgebswblcto E Nlm Het Storage location: Supplier

Condition: used, machine/vehicle number: 006375, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Csb E Nlmsp Apx Te Hjgt Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 202129, On behalf of our client, we are offering a Fravol edge banding machine. This is a consignment sale, where the machine can be seen at our warehouse in Brno. Cgsb Eewfgkms Nlm Hjt

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500 Cgsbevhc E Ho E Nlm Hot

Condition: new, Year of construction: 2025, The Hebrock F 5 Cgjb E Nelht Hwolm Het If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: not inspected (used), Year of construction: 2010, Automatic edge banding machine for pre-glued edges Cgsb Eswfw A Hj Nlm Hst

Condition: good (used), Code: 0042 Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Technical data Cgob Ejv Ay Hke Nlm Het Min/max panel height mm 10/60 Feed speed mt/min 3,8 Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Cjb E Nsi Am U Dslm Hjgt Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: good (used), Code: 0036 Brand: CASADEI INDUSTRIA Model: V 20/10 R - CE Standard Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Cgjbevz S Sve E Nlm Hot Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2300 x 700 x 1250 h Weight kg 350

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. Cgjb E Nslht Hzslm Hjt F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Cgob Ejhqadce Nlm Het Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -