Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Debvcxelht Hwe Tdecg Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Dcjbvcxsu Hldmj Tdog Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: excellent (used), Year of construction: 2011, • Feed Speed 8-18m/min • Workpiece Thickness 8-60mm • Edge Coil 0.4-3mm • Edge Strip 0.4-15mm • Pre-Milling 2X2.2kw • Pre-Heating Unit • Quickmelt Application Unit • Quickmelt Pre-Melter • Pressure Zone with motor driven adjustment • End Trim Unit • Pneumatic adjustment End Trimming Chamfer / Straight • Pneumatic 2 Point Adjustment End Trimming • Rough Trimming Unit 2X0.55Kw • Pneumatic adjustment Trimming Unit • Pneumatic 2 Point Adjustment Flush or Overhang • Trimming Unit 2X0.55Kw Synchronism • Pneumatic 2 point adjustment • Program adjustment – Lateral sensing • Program adjustment to edge thickness • Multifunctional Contour Trimming Unit 2X0.35Kw • Profiule Scraping unit – Quick Change heads • Pneumatic adjustment profile scraping unit • Glue Joint Scraping Unit Dcebvcx Teph Uk Esdog • Buffing Unit • PC 20 • Optimised Workpiece Gaps • V-Belt Top Pressure Belt • Separating Agent Spray Device • Detergent Spraying Unit • Automatic Edge Infeed Device • Multiple Roller Sensing Fine Trimming Unit • Multiple Roller Sensing Rough Trimming Unit • Special Sensing for Scraping Unit • Interface for Ligmatech ZHR05 Return System not included.

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Electronically Controlled Feed Speed: 6-30 m/min Roll Edge Thickness: 0.3 - 3.0 mm Edge Types: Paper, PVC, and ABS edges 0.3 - 3.0 mm; Veneer 0.5 - 3.0 mm; Wood slats 0.8 - 20 mm Edge Height: 14 mm - 65 mm Dcebvcxsvy I Uqe Tdeg Maximum Edge Allowance from Above: For edge thickness up to 8 mm - 5 mm; Over 8 mm - 2 mm This IMA Novimat Contour I/G80/790/L20 edgebander was manufactured in 2009. It is designed for efficient edge banding applications, ensuring precise and consistent results. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2001, IDM SCM Activa R 59 edge banding machine Dsbvcx Toufzi Hedocg Joining milling unit TT/A S piece 2 kW at 12000 rpm 200 Hz Gluing unit: Edge thickness 0.4 to 22 mm Workpiece height 10- 60 mm Cutting unit IN 600 Motor power 2x 0.5 kW 12000 rpm Motor inclination 15° adjustable Milling unit R on top of each other Milling cutter diameter 80 mm 12000 rpm Motor power 2 x 1.8 kW Round SK with 2 motors Material thickness 10- 45 mm Edge thickness 0.4 - 3 mm Radius scraper RCS 99 Surface scraper RCA Buffing unit SPK Hot air dryer to restore the edge color Feed speed 12-18 m/min Space requirement length 6590 x 1400 mm x 1800 mm Weight 4000 kg Year of manufacture 2001 Price 10,000.-

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Single-sided automatic edge banding machine with CNC control 10" touchscreen Industrial conveyor chain 1"1/4 Joining trimming unit FI-502 Glue application unit VC-710 Cross-cutting unit IN-801 Flush trimming unit RS-100, top and bottom 2 motorized multifunctional units: CR-202 profile trimming unit (FAST system with 4 positions as standard) RBK-503 NC scraper unit, 2 positions RCC-701 flat scraper Workpiece thickness 10-65 mm Max. workpiece height with profile trimming unit (depending on profile) 35-65 mm Edge thickness for rolls 0.4-3 mm Dcebvcxjv R Nk Ue Tdog Edge thickness for strips 0.4-22 mm (depending on unit) Min. workpiece length 140 mm Min. workpiece width (at length 140 mm) 85 mm Min. workpiece width (at length 250 mm) 50 mm Feed speeds 10-14-18-20 mm Central extraction connection 200 mm Extraction connection for gluing 80 mm Extraction connection for joint milling 120 mm Glue container capacity approx. 3 kg Heating time at 1/2 fill approx. 10 min. Length 6000 mm Width 1780 mm Height 1770 mm Machine does not include the workpiece return device shown in the pictures. Availability: Short term Location: Röllbach

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. Dcsbji Am U Dovcx Tdog F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Dobvcx Tewd Itmodjcg Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2010, Specification: • Total length; 5270mm Dcobvstmtaaocx Tdeg • Feed Speed 8-14m/min • Workpiece Thickness: 8-60mm • Edge Coil Material: 0.4-3mm • Edge Material Strips: 0.4-8mm • Joint Trimming 2X 2.2kw • Standard EVA Application Glue Unit • End Trim Unit Chamfer / Straight with pneumatic adjustment • Rough Trimming Unit • Multifunctional contour Trimming • Profile Scraping with pneumatic adjustment • Glue joint scraping • Buffing Unit • Power Control PC20+

Condition: ready for operation (used), Year of construction: 2003, Additional Equipment Glue Part A20 Strip: Max processing strip goods 20 mm, roll goods 3 mm / Trimming Unit HL 05 Bevel/Straight: Motors 0.4 kW each, 12000 rpm / Buffing Unit Top and Bottom: Motors 0.25 kW each Stepless Vertical and Horizontal Axes / Belt Grinding Unit KS 10: For grinding straight edges / Chamfer/Radius Grinding Unit Top PS 42 & Bottom PS 41: Motor 0.55 kW This configuration ensures efficient processing of various materials with versatile trimming, milling, and grinding options. Dcebvcsv Eh R Njx Tdsg This 4-axis HOMAG PROFI KFL20/29/QA/25 was manufactured in 2003. Ideal for efficient edge banding, this double-sided edgebander represents a robust solution for woodworking needs. Consider the opportunity to buy this HOMAG PROFI KFL20/29/QA/25 double sided edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Dcsbvor Elhvjcx Tdog Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 1999 price 5500.-

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: with guide -Engines: 2 x Perske VS 40.09/2 -Power: 0.26 kW -Voltage 220/380 V 50 Hz -Speed: 2660 rpm -Number: 1x milling unit available Debvjvy Tucecx Tdscg -Dimensions: 750/270/H300 mm -Weight: 40 kg

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment Dcjbslht Hzsvcx Tdog (radius- ,chamfer-, flush milling)

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Dcebvsv Sf I Escx Tdjg Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2011, • Panel Length Max with re-clamping function: 6000mm • Panel length Max without Re-clamping function: 3500mm • Panel length min in automatic mode 170mm breast dimension • Panel width max 260mm squared timber in automatic mode fully independent operation • Panel width max 300mm squared timber in automatic mode single part operation • Panel width max 1300mm in manual mode for door leaves • Panel Thickness max 150mm • In and out feed station • Available loading depth 2000mm • Table prepared for a part length of max 3500mm • Gripper Device Debst Aafcevcx Tdocg • Clamping table with 2 longitudinal beams in the x direction • Chip conveyor belt • Pre-installation for vacuum pump and vacuum clamping elements • Coolant reservoir for main spindle • Pneumatic kit powerclamp for K+AP table • Stop fence for BMB 900 • Vacuum Pump • Boring Head with 9 vertical drills • Boring Head with 4 horizontal drills • 18.5Kw Main Spindle with C-axis for Flex 5 unit on right • 72 position chain type tool changer on the right • 2X 18.5Kw Main spindle with c-axis for Flex 5 unit on left • 2X 72 position chain type tool changer • Label Printer • Power Control PC 85 • Diagnosis System Woodscout • Tool service life determination • Connection construction software for window • Homag Quality Pack • 400V 50Hz • CE Marked

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Pneumatically controlled infeed stop // Pneumatic pressure adjustment with driven pre-press roller and post-pressing rollers Top pressure with composite V-belt drive Transport chain with rubber pad, magnetically braked Workpiece support with extendable roller rail Dcobvcjvxl Rtjx Tdeg Noise protection with individual extraction Quickmelt application unit with electronic temperature control Magazine for solid edges, strips, and rolls Automatic strip separation via vacuum suction cup Edge monitoring with feed stop and edge sequence control Mounted switch cabinet with electronic frequency converter This HOMAG KAL 330/9/A6/L edgebander was manufactured in 2011. It features a robust machine stand, electronic height adjustment, and a transport chain with a rubber pad. The machine includes a Quickmelt application unit with electronic temperature control and a pressure zone with pneumatic adjustment. Ideal for processing straight workpiece edges, it supports various edge materials. For more information about this edgebander, please reach out to us. Application Types Edge Banding

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engines: 2 x Perske VS 31.09-2 / DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz Dobvcsvy Thcox Tdocg -Speed: 11300 rpm -Number: 1x milling unit available -Dimensions: 490/380/H610 mm -Weight: 49 kg

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Dcsbvcx Tehqadcedsg Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: used, machine/vehicle number: 007812, Type of edging: Thin edge, Thick edge, Solid wood Dsbvcx Tov Sldajdjcg Gluing System: EVA Hotmelt Premilling Unit: yes Grooving Unit: yes Maximum panel thickness: 90 mm Operating Units: 6 nr

Condition: ready for operation (used), Year of construction: 2012, Table Outer length 500 mm Outer width 500 mm Dobvcxovkkrye Tdecg Additional Equipment Joint Milling Unit: 2 motors, each 4.0 kW, 8800 RPM Heater: Preheats workpiece edges up to 60 mm Glue Application: Handles edges up to 3 mm End Trimming Unit: 2 motors, 660 kW Additional Units: Milling, Multi-Profile Milling, Contour Milling, Multi-Profile Scraper, and Scraper Units; Buffing Unit Automatic Quickmelt hot glue feeder Board Return System with powered roller conveyors, cross conveyor, transport belt, angle transfer, air-cushion tables, and safety fence This IMA Novimat Concept / I / G80 / 440 / R3 edgebander was manufactured in 2012. It features a robust automatic edge banding and post-processing system, including a workpiece returning system for enhanced productivity. Capable of handling edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-lock system and electronic temperature control for precise glue application. Consider the opportunity to buy this IMA Novimat Concept / I / G80 / 440 / R3 edgebander. Contact us for more information. Application Types Edge Banding

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Motors: 2 x Perske DKNS 502/2 -Power: 0.15 kW -Frequency: 200 Hz -Speed: 10400 rpm Dsbvcevy Tdwsx Tdjcg -Number: 1x milling unit available -Dimensions: 470/410/H600 mm -Weight: 60 kg

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024 Dobvcoi Anadox Tdjcg

Condition: ready for operation (used), Year of construction: 2010, This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information. Application Types Edge Banding Dsbjvy I S Aovcx Tdscg

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Djbvcxoi Am Ukj Tdscg Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Anti-adhesive spray unit "AAR" - Complete with 2 sprayers and a storage container Spray device for finishing the edge Top pressure with belt Motors with power 4 kW for RT/E pre-milling unit "SGP" glue container with NC dosing Ceramic lamps with infrared rays "MultiEdge" device for the RI/S flush milling unit Additional Equipment Anti-adhesive spray unit "AAR" - Complete with 2 sprayers and a storage container Spray device for finishing the edge Top pressure with belt Motors with power 4 kW for RT/E pre-milling unit Dcjbvou Dcl Aecx Tdeg "SGP" glue container with NC dosing Ceramic lamps with infrared rays "MultiEdge" device for the RI/S flush milling unit This SCM Stefani MD RM edgebander was manufactured in 2023. It features adjustable chain feed speeds of 10-22 m/min and handles edge thicknesses up to 15 mm. Equipped with a pre-milling unit, glue unit with quick-change capabilities, and a cutting unit for precise edge finishing. The Maestro active edge control system enhances user interaction for optimal performance. If you are looking to get high-quality edgebanding capabilities consider the SCM Stefani MD RM machine we have for sale. Contact us for more information. Application Types Edge Banding