Condition: used, Year of construction: 2006, Used machine Year of construction 2006 completely overhauled with new glue application system Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Dsbu Ugpjkwg Sle Ijkl Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2017, Workpiece return: Rollers driven Edgeband thickness max: 22 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 25 m/min Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: Premelting unit BIESSE Glue system QM 705: Yes Spraying device: Yes BIESSE Spraying device ADZ 700: Yes BIESSE Spraying device LPT 700 Application unit for lubricant: Yes BIESSE Spraying device LPT 700 Cleaning agent application unit: Yes Premilling unit: Yes BIESSE Premilling unit FI 502: Yes Preheating zone: Yes BIESSE Preheating zone IRL 700: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Dkobu Ugowd Nzfep Iel BIESSE Corner rounding unit AR 30 NC: Yes Scraper unit: Profile scraper, Flat scraper BIESSE Profile scraper unit RB 400: Yes BIESSE Flat scraper unit RCC 701: Yes Buffing unit: Yes BIESSE Buffing unit SP 501: Yes Suitable for nesting: Bündig/Radius/Fasestationen, Profile scraper Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.450 mm Control: BIESSE SMART TOUCH Conformity marking: CE mark, EAC mark Weight: 3.200 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,185 h, Edge thickness: 0.4 - 12 mm Max. workpiece thickness: 8 - 60 mm Feed rate: 8 - 18 m/min, continuously variable Weight: approx. 2.5 t Dkjbu Uowhnguogp Isl Total length: 6,260 mm Pre-melter: Yes Joining unit: Yes Cross-cut saw unit: Yes Radius, flush trimming unit: Yes Corner rounding unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing: Yes

Condition: used, Year of construction: 2019, Functionality: fully functional, 2019 model with old control system and slight paint damage. (The photos are product photos and do not depict the original machine.) Slight signs of wear may occur. Convenient and easy control of all important functions via the front control panel Excellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reduction Precise and proven units enable optimal processing and perfect edge finishing Pre-milling unit equipped with two dia-milling cutters High-frequency motors for edge processing Equipped with radius and flat scrapers as standard Optionally expandable with either a buffing or grooving unit with a groove width of up to 4.0 mm Available in various configurations to adapt to individual requirements Automatic temperature reduction of the glue unit when the machine is idle for extended periods Standard equipment includes an aluminum glue container for EVA hot melt adhesive Dimensions and Weights Length (product) approx. 3314 mm Width/Depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power input 2 x 0.35 kW Flush radius trimming unit cutter diameter HM 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction nozzle diameter 60 mm Flush radius trimming unit number of extraction nozzles 2 Corner rounding unit Corner rounding unit power input 0.35 kW Corner rounding unit tool diameter 58 mm Corner rounding unit speed 12,000 rpm Electrical data Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power input 0.18 kW Glue pot operating temperature 190 °C Glue pot extraction nozzle diameter 60 mm Glue pot capacity 0.8 kg Pneumatic connection Operating pressure 6.5 bar Feed Feed input power 0.55 kW Feed speed 7 m/min Edges Edge thickness for rolled material 0.4 - 2.0 mm Edge thickness for strip material 0.4 - 3.0 mm Pre-milling unit Pre-milling unit extraction nozzle diameter 2 x 80 mm Pre-milling unit input power 2.2 kW Pre-milling unit cutter speed 9000 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units radius scraper 2 mm Buffing unit Buffing unit input power 2 x 0.14 kW Buffing unit speed 2800 rpm Workpiece Workpiece thickness 8 - 50 mm Workpiece length min. 120mm Workpiece width min. 110mm Equipment ----- - 730mm roller edge turntable - Anti-adhesive spray unit - Pre-milling unit with two dia-milling cutters - Edge preheating device - Glue container quick-change kit - Gluing unit - Corner rounding unit Dkobu Ugswg Abdsp Ijl - Flush radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit

Condition: used, Year of construction: 1994, operating hours: 5,373 h, Functionality: fully functional, machine/vehicle number: M/6176, total length: 9,000 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,000 kg, Edgebander Operating hours: 05373.33 h (read) Dobowf U E Sou Ugp Iekl Processing units: Upper pressure line KAM 4-2 01 Rapid heating tank KAM 4-61-02.01 Lower pressure line KAM 4-1-01 Edge feeding table KAM 4-4-01 Automatic Magazine for solid edges and foils Feed roller KAM K4-51-01 KAM travelling foil shear Cutting device model type K 17 Fixed milling machine KAM 4-50-00 model type NF 30.1 Fine milling machine KAM 4-26-80 Slot milling machine KAM 4-32-01 Rounding corners Grinding device Scraper unit Oscillating edge cleaning unit KE-0 Dimensions: approx. 9,000 x 1,400 x 2,000 mm Weight: approx. 4,000 kg

Condition: ready for operation (used), Year of construction: 2013, Tools Dobu Uowgqa Usgp Iokl Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Dkjbu Ugokwhp Eep Ijl Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2019, Edgeband thickness max: 8 mm Dsbu Ujuxqvxjgp Iokl Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feed min: 8 m/min Feedrate max: 14 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: Premelting unit BRANDT Glue system QA 65N Gluing unit: Yes Quick-change glue pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 HOMAG Fine milling unit MS 40 Multistage trimming unit: Yes Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 5.100 mm BRANDT Automatic edge feeding device: Yes Infeed barrier: Yes Control: Homag powerTouch Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 0-202-21-6404, -Technical specifications of the KFL 526 - Continuously adjustable feed rate 15-40 m/min (optionally up to 50 m/min) - Up to 40 m/min for thin edges up to 0.6 mm - Up to 30 m/min for thick edges up to 3 mm - Fixed workpiece overhang 30 mm - Workpiece thickness 12-40 mm - Working height to the top of the chain 950 mm - Working width double-sided min. 220 mm to max. 2500 mm - Workpiece length in front of the cam max. 1200 mm Dobu Ugowgl Ndsp Iskl - Edge material roll 0.3-3 mm - Max. edge cross-section for PVC 135 mm², for veneer 100 mm² - Roll diameter max. 830 mm - Pneumatic connection 7-8 bar + PROFI TBL100/25/20 (HOMAG feeding and Stacking) - Technical Specifications - 3-compartment pallet magazine - No machine stop during pallet changes - Infinite stacking patterns possible - Data connection to the edge processing system - Automatic return after the first pass - Semi-automated (1 machine operator required) - Workpiece length min. 250 mm to max. 2500 mm for TBL 10025/.. - Workpiece width min. 220 mm to max. 2000 mm for TBL100/ /20 - Roller diameter 64 mm - Roller guide approx. 120 mm - Feed rate continuously adjustable 7-40 m/min - Working height 950 mm +/- 50 mm - Pneumatic connection 7-8 bar

Condition: used, Year of construction: 2015, AUTOMATIC SINGLE-SIDED COMPACT EDGE BANDER K 560R No. AH/118547 MAIN FEATURES GLUE ROLLER: OPTIMAL GLUE JOINT FLUSH MILLING UNIT WITH 3 POSITIONS: FAST CONVERSION BETWEEN THIN, THICK AND SOLID WOOD EDGES TOUCH 7 CONTROL: ONE TOUCH IS ENOUGH TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge bander for gluing the edges with hot melt adhesive on the four sides of straight panels and for subsequent milling. Cold-rolled steel frame in a box construction, for high rigidity and freedom from vibration. Openings with chutes for unloading any remaining chips at the bottom. Pressure beam made of thick-walled steel construction and with steel columns, for a vibration-free structure where the working units are attached. Rollers on the double row feed chain, made of rubber with a high friction coefficient and sliding on bearing-mounted rollers. Device to protect the pressure rollers from any residual chips. Manual adjustment of the pressure unit at the machine inlet, with numerical control. Working units fixed to the pressure beam or mechanically linked to ensure automatic adjustment when changing panel thickness. Working units fixed to the lower longitudinal beam, for a precise reference in relation to the panel. All high-frequency motors are connected via frequency converters (inverters). Tool hood along the entire length of the machine, with polycarbonate window for a good overview of the units during processing. Two separate hoods are provided for access to the working units; The first with electrical locking for the pre-milling unit and gluing unit, the second with electromechanical locking for all other outlets, located on the pivoting control panel in an ergonomic position. The electrical system complies with current regulations. The electrical components are housed in the machine frame, with a door for easy access in case of panel failure. Panel feeding is carried out via a feed chain consisting of high-friction rubber sliders on a 1-1/4" industrial chain. The chain slides on two hardened steel guides, one round and one flat, to ensure linear advancement and protect against lateral misalignment. Manual lubrication of the external bearing roller conveyor positioned along the entire length of the machine; it consists of a telescopic opening system with sliding on linear bearings and plastic rollers with pivot pins. CONTROL SYSTEM "Touch 7" Control System. Main features: – 7" - 16:9 wide color touchscreen – Graphic representation of all processing units and their status (ON/OFF) – Graphic simulation of the machining operations to be carried out on each side of the panel– 60 work programs with direct configuration by the operator– Control of the machining units and automatic activation of the motors– Complete control of the machine through the PLC function and the encoder positioned on the pinion of the feed chain– Setting and regulation of the temperature of the glue pot– Selection of longitudinal and transverse machining without changing the program– Simple and guided diagnostics for easy error correction– Statistics on absolute data and individual machining operations: number of pieces, Dksbu Usvvkdmogp Iel

Condition: ready for operation (used), Year of construction: 2008, Additional Equipment Dobu Ujwbw D Njgp Ijkl 2 x joint milling machines Gluing unit with 2-way edge magazine Trimming unit Flush milling // Fine milling Copy milling (4 motors) Profile scraper // Surface scraper Buffing Sanding unit (straight) // 2 x sanding units (radius) 2 x grooving units Workpiece return This edgebander was manufactured in 2008. It features a gluing unit with a 2-way edge magazine, trimming unit, flush milling, fine milling, and copy milling with 4 motors. Additional capabilities include profile and surface scraping, buffing, and both straight and radius sanding units. Ideal for comprehensive edge banding and finishing tasks. Contact us for more information about this machine. Application Types Edge Banding

Condition: used, Year of construction: 2013, Used machine Year of construction: 2013 Machine number: 133 Machine has been completely overhauled new Glue Jet 301 glue system (upper part 1 mm) all units checked all cutters sharpened all knives changed - electrics for infinitely variable feed 400 V / 50 Hz, 2.2 KW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - infeed guide 1350 mm, motorized adjustment - Joint trimming unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 trimming units for joining the panel edge. - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for jointing trimming unit 1801 / 1802 - Fully automatic edge feeding unit 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) -Storage chute for granulate - Printing unit 1913 MOT - Cutting unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise rotation Dobusrp It To Ugp Iokl - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise rotation - Shaping cutter unit 1833 MOT4 - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise rotation with CM technology - Scraper unit 1929 MOT2 - HW inserts for scraper holder R = 2.5 mm (2 pcs. required) - Surface scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1994, Storage location: Nattheim Dkebsvvkdtou Ugp Isl

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Djboryyhcou Ugp Iekl Availability: at short notice Location: Hochheim Hochheim

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Dkjbsvvkd Tou Ugp Iol Storage location: Nattheim

Condition: used, Year of construction: 2011, Used machine Year of construction : 2011 Condition : Function tested with new PPC-panel Glue thickness max mm : 6 Gluing height max mm : 60 Dkobu Ugju D Ttqsp Isl Roll material thickness max mm : 3 Workpiece length min mm : 160 Workpiece width min mm : 65 Feed rate max m/min : 10 Glue system cartridge : Yes Glue system granulate : Yes Suitable for PUR glue : Yes Joint trimming unit : Yes Cross-cut saw unit : 2 motors Flush/radius/bevel stations : 1 Corner copying unit : 1 motor Scraper unit : Profile and flat Strip magazine : Yes Cycled units : NC axis(es) Design : Left-hand machine 1903 : Yes 1827 MOT4 : Yes 1832 : Yes 1929 MOT2 : Yes Control and software - HOLZ-HER EDGECONTROL CE mark : Yes Declaration of conformity : Yes Total connection kW : 7,60 L x W x H 4630 x 1411 x 1698 mm Weight approx. kg : 1,235 Location: Hochheim Availability : short term

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Dksbu Ugevvkfdop Ijl

Condition: used, Year of construction: 2010, Used machine Edge banding machine, right-hand version Year of manufacture 2010 Equipment and technical data: max. edge thickness 3 mm with preparation for exchange tank min./max. Workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. Min. workpiece length 190 mm Min. workpiece width 80 mm Joining milling unit with 2 milling heads Dkebujuhirbj Ugp Isl with PLC control (incl. touchscreen) Glue pot with contact roller Pressure zone Cutting shears Cutting saw Combination milling unit flush/bevel/radius pneumatically adjustable Corner copying unit Surface scraper, short version Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Dsbu Ugevvkfqsp Iskl

Condition: new, Year of construction: 2024, New machine Djbu Ugju Swadop Ijkl Year of construction 2024 Compact and flexible in the smallest of spaces. Workpieces get their finish on a length of only 2.13 m. Equipped with a 1.1 KW high-frequency motor joining unit and diamond-tipped spiral jointing cutter, Teflon-coated gluing unit, pre-capping unit and HF multifunctional trimming unit 2 free spaces for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5 color touch screen. Technical data Machine length 2122 mm Workpiece thickness 10- 45 mm Workpiece width min approx. 120 mm Edge thickness 0.4 - 2.0 mm Max. edge height = workpiece height + 4 mm (2+2) Electrical connection 230 V Total connection 3.6 kW Feed speed 6.5 m/min. Pneumatic connection 6 bar Net weight approx. 490 kg Options: Surface scraper unit Diamanmat tools height = 45 mm Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Dsbsvvkfwsu Ugp Iekl

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Dkebu Ugpotq Nlre Ijl Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: used, Year of construction: 2001, Max. edge band thickness: 0.2 - 12 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Min. workpiece width: 70 mm Feed speed 1: 12 m/min Heat-up time: approx. 8 min Joining unit: Yes, with 2 milling units Automatic roll magazine: Yes Trimming shears up to: 3.0 mm Solid edge magazine: Yes Gluing: Glue pot with granulate on top Trimming saw: Yes, double trimming unit Flush trimming unit: pneumatically adjustable Chamfer and radius milling unit: pneumatically adjustable with interchangeable motors Rounding unit: pneumatically adjustable (corner rounding) Profile scraper: pneumatically adjustable Flat scraper: Yes, scanning Buffing unit: oscillating Unit display: Digital Control type: Section control/PLC Operation: Screen/PC control Extendable Roller support: Yes. Protective cover: Yes. Working height or feed table height: 800 mm. Approx. weight: 2100 kg. Dimensions: 5300 x 950 x 1300 mm. Motor power: 12 kW. Storage location: Customer. Dsbuovvkdas Ugp Ijkl

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Dkobu Ugjvzc Rijp Iol Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Control with LCD display, pivoting control panel, program memory, manual pressure bridge adjustment, feed by means of transport chain, extendable workpiece support, joining milling unit 1961 2 x 2.0 kW diamond joining milling cutters in parallel and counter-rotating motion, edge magazine 1903 support plate 820 mm, max. loading capacity 40 mm automatic feeding of rolls and strips glue application system 1906 cartridge system with tactile nozzle, with automatic reloading use of PUR adhesives possible, printing unit 1816 with driven roller, pneumatic control of the printing unit cutting unit 1918 2 x 0.22 kW pivoting from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2 for flush / radius and chamfer milling motor-adjustable Blow nozzle on the milling unit, Corner copying unit 1832 Corner copying up to 3 mm radius, postforming up to r = 6 mm Radius scraper unit 1929 Plastic edges up to 3 mm Chip catcher box for radius scraper, insert-controlled surface scraper 1964 Blow nozzle on the surface scraper Buffing unit 1940 Djbu Ugpjv Aqybe Iokl Spray device for separating and cleaning agent application complete ----- Technical data ----- Edge thickness of rolled goods: 3 mm, Edge thickness of strip goods: 5 mm Max. edge thickness for corner copying: 3 mm, Workpiece thickness: 6/45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8 m/min, Distance between workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cutting knife for rolled goods up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Power of crosscut saw: 2 x 0.22 kW, Power of milling station: 2 x 0.6 kW, Power of corner copying: 0.22 kW, Extraction nozzle of jointing milling unit: 120 mm, Extraction nozzle of milling unit: 70 mm, Extraction nozzle of scraper unit: 70 mm, Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm, Weight: 1,200 kg Availability: short term Location: Flörsheim