Used engraving machines for sale (130)

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: P3000-03-10-04798, pressure: 5.5 bar, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates collection within the specified periods, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Pressure: 5.5 bar MACHINE DETAILS Voltage: 115/230 V Frequency: 50/60 Hz Power: 120 VA Kodsyniyzepfx Am Eelr Dimensions & Weight Dimensions (L x W x H): 550 x 300 x 700 mm Machine weight: 30 kg External reference: Lot 1 / Wittner

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. • Laser type: Q-switched solid-state laser • Laser medium: Nd:YAG Kjdpfxjx Sz Efs Am Ejlr • Wavelength: 1064 nm • Beam quality (M²): 13 (6 kHz, MM);

Condition: good (used), Year of construction: 1969, Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 Kledpfx Asidckfom Eer driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: excellent (used), Year of construction: 2021, Trotec RayJet 50 Year of manufacture: 2021 Working area: 457 x 305 mm 30-watt CO₂ laser Air Assist – airflow for continuous cleaning of engraving areas Klodpfx Amey Eg R Hs Esr For engraving and cutting wood, paper, rubber, acrylic, etc. Maximum speed: 1.5 m/s

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with a power range of 30–120 W and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 30–120 W (depending on configuration) • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Kjdpfx Ajx I S Nysm Ejlr Engraving Speed 3000 m/s

Year of construction: 1985, condition: used, 1 branded engraving machine make KUHLMANN type GM I-I working area: 320 x 200 x 280 stencil table 500 x 400 mm, working table 500 x 200 mm 3D shape engraving device Ksdsk Tt Axjpfx Am Eolr TGV - plate engraving device Div. stencils and type sets Div. engraving gravers Speed range 4.200 - 20.000 min-1 Space requirement approx. 1.2 x 1 x 1.5 m Weight approx. 250 kg

Condition: new, Year of construction: 2025, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! Kodpfxor D Ngte Am Ejlr You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. Ksdjh Uc Dbjpfx Am Eelr You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Laser power: 20-100 W Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cabin, Trotec Rayjet 50 – CO₂ Laser System for Engraving & Cutting The Trotec Rayjet 50 is a compact and reliable CO₂ laser ideal for precise engraving and cutting applications. This system is an excellent choice for small businesses, workshops, educational institutions, and professionals seeking to enter laser processing. Currently, 2 units are available from stock. Manufacturer: Trotec Model: Rayjet 50 Year of manufacture: 10/2019 Technical specifications: Laser source: CO₂ laser Laser power: 30 W Working area: 500 × 300 mm Maximum material height: 145 mm Engraving speed: up to 2.0 m/s Positioning accuracy: 0.01 mm Resolution: up to 1,000 dpi Cooling system: Air-cooled Interface: USB / Ethernet Software: Compatible with standard graphic programs (e.g., CorelDRAW) Dimensions (W × D × H): approx. 870 × 670 × 430 mm Includes extraction system 8401 Atmos Cube All information provided without guarantee. Klsdpfx Ameyhyu Hs Ejr Subject to prior sale.

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 700 mm, total height: 1,500 mm, total length: 800 mm, overall weight: 700 kg, TRUMPF LASERSIGN PL 2 Laser Engraving Machine - Operating voltage: 100 - 240 V Kledpfjym Rx Nex Am Ejr - Frequency: 50/60 Hz - Rated current: 7 A - Power connection: 600 W - Internal dimensions: 400 x 300 mm - Table dimensions: 330 x 270 mm - with 6 T-slots - incl. laser source from manufacturer TBH Attention: The item must be collected bindingly between 21.04. and 30.04.2026 on a date to be agreed. FCA D-96257 Marktgraitz – loaded onto truck

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm Kljdpfx Amolfilyo Esr colour: Grey

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Kedpeq Abnnefx Am Eolr Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2015, functionality: unexamined, input voltage: 230 V, type of input current: AC, laser power: 20 W, door opening width: 800 mm, scan area length: 1,000 mm, scan area width: 450 mm, input current: 16 A, laser wavelength: 1,050 nm, working height: 303 mm, input frequency: 50 Hz, working width: 1,000 mm, We are offering this used Trotec Speedmarker 1300 20 Watt/SM1300 SZ SX SY industrial laser marking machine, year of manufacture 2015. Serial number: M13F-0102 Model designation: SM1300 SZ SX SY Date of manufacture: February 2015 Number of phases: 1~ Voltage: 230 V AC Current: 16 A Kedsy Ecn Ijpfx Am Eelr Frequency: 50/60 Hz Rated power: 1500 W Laser crystal: Yb Laser power: 20 W Laser wavelength: 1050–1090 nm Wiring diagram no.: Speedmarker FL 10-50W Laser diode power: < 0.5 mW Laser diode operating mode: cw Laser diode wavelength: 635 nm Trotec Speedmarker 1300 20 Watt Fiber, year 2015 FEATURES - 20 Watt fiber laser - Pilot laser & Focus Finder Laser - SpeedMark laser software - Industrial PC - Software-controlled X, Y, and Z axes - Working area: 1000 mm x 450 mm - Maximum part height: 303 mm (with f = 254 mm lens) - Heavy-duty worktable with T-slot plate - Illuminated working area - RGV rotary axis for round parts Preparation for extraction system (extraction not included in the sale). We also have 2 smaller Trotec models available for sale: Trotec Laser Work Station 20 Watt Laser, year 2010, with rotary axis If you have any questions or require more information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 30 watt laser power - Demonstration unit (approx. 100 hours) - Viewing is worthwhile - Includes Windows PC 64bit (with monitor/keyboard/mouse) - Fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - 30 watt fiber laser source for high-contrast and fast markings with extremely high resolution (see images) Klodpfed Ha I Ssx Am Esr - Wobble function, e.g. for cleaning metal components - Deep engraving up to 3mm possible - For engraving a wide range of metals (stainless steel, brass, aluminum, etc.) and many plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 390 x 270 x 350 mm (L x W x H) - Clamping surface with threaded holes in a 50 mm grid - LED workspace lighting - 50 mm pipe connection for fume extraction - Engraving area up to 170 x 170 mm - Motorized focus adjustment - Foot switch included for starting the engraving process Please also check our attractive leasing and hire purchase offers. Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 450 mm Height: 800 mm Depth: 750 mm Weight: approx. 80 kg

Condition: used, Year of construction: 2006, Type Scorpion (W/S) Year 2006 In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Ksdpfx Amexrg Dks Eolr Subject to prior sale!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Ksdpfxeyug Rqo Am Eelr Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17000-21007552412, input voltage: 230 V, laser power: 30 W, Only 2 years of test operation – climate-controlled residential environment – no exposure to dust or workshop conditions The Epilog Fusion Edge 12 on offer is a professional CO₂ laser system designed for precise engraving and cutting applications in continuous operation. This unit was used exclusively for testing and development purposes over a period of just two years and was always located in a climate-controlled residential space. It has never been in a workshop environment, nor exposed to dust, thermal stress, or dirt, resulting in an almost factory-new condition. The machine has been maintained regularly by cameo Laser and is ready for immediate use. Inspection and a full functionality test are available at any time. Technical Specifications: - Model: Epilog Fusion Edge 12 - Laser Source: 30 W CO₂ "WaveGuide" - Working Area: 610 × 305 mm - Maximum Engraving Speed: 3 m/s (5G) - Maximum Material Height: 178 mm - IRIS™ Camera Positioning System - Autofocus + 2" Focusing Lens - Red Pilot Laser - Honeycomb Cutting Table - LED Interior Lighting - Large Safety Glass Viewing Window Klodpfoyqxngex Am Ejr - Air Assist incl. Compressor - Laser Class: 2 - Connections: USB, Ethernet, Wi-Fi - Touchscreen + Joystick Control - 1 GB Internal Memory - SAFEGUARD Mechanical Protection - Mobile thanks to integrated castors Vacuum Extraction System vacuair UML 340 edge (included) Recirculating Air Base Unit: - 3-stage filtration (HEPA H14, pre-filter, 15 kg activated carbon) - Airflow: 340 m³/h - Separation Efficiency: >99% - Serial Number: 50138217001 - Very quiet operation – ideal for indoor spaces Accessories & Documentation: - Air Assist Compressor - Camera Calibration Plate - Cleaning and Maintenance Accessories - Fusion Edge Software (CD) - Printed User Manual - Original Invoice (Initial value: €22,105.98) Condition & Usage History: - Only 2 years of test operation - Used exclusively in a climate-controlled residential environment - No exposure to dust, dirt, or workshop conditions - Very low operating hours - Regularly serviced - Excellent optical and technical condition, almost as new - Ready for immediate use

Condition: good (used), machine/vehicle number: 16526, pattern table size: 320 x 440 mm working table size: 200 x 300 mm working area longitudinal: 250 mm working area cross: 220 mm spindle turning speed range: 1460 - 8550 rpm milling proportion: bei 1 : 1 ca. 105 x 165 mm spindle drive: 0,86 kW Kljdpsdlkwgefx Am Ejr space needed: 1000 x 900 x 1320 mm weight: 360 kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile Kledpeywg Sbefx Am Eer - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used automatic wheel rim cleaning machine - BBS Manufacturer: Macchina Utensili Kledpjw Rrwzofx Am Eor Year of manufacture: 2000

Condition: used, Year of construction: 1969, functionality: fully functional, machine/vehicle number: Gel/1 02.0026, Used engraving machine Kedpfx Asyg Rv Usm Eelr Make: Franz Kuhlmann Serial No.: Gml/1 / 02.0026 with accessories

Condition: excellent (used), Year of construction: 2015, Trotec Speedy 100 CO₂ Laser – 80W | Year of Manufacture: 2015 | Professional Laser Engraver & Cutter Klsdpfjy D Undsx Am Esr For sale is a high-quality Trotec Speedy 100 CO₂ laser from 2015. The machine is in very good condition and is ideally suited for professional engraving and laser cutting applications. 🔧 Technical Specifications: Manufacturer: Trotec Model: Speedy 100 Year of Manufacture: 2015 Laser Power: 80 Watt CO₂ Working Area: approx. 610 x 305 mm Maximum Workpiece Height: approx. 170 mm Engraving Resolution: up to ~1000 dpi ⚙️ Features & Benefits: - Precise cutting and engraving of a wide range of materials (wood, acrylic, leather, plastics, etc.) - Compact, rugged industrial unit – ideally suited even for smaller workshops - High speed and excellent repeatability - Proven Trotec quality 📦 Condition: Technically very good Well-maintained and ready for immediate use Serviced exclusively by Trotec 📍 Location: 6105 Leutasch, Tyrol (Austria) Inspection and test run possible by appointment at any time. Please feel free to contact me if you have any questions.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Ksdpfsd Dhw Nex Am Eelr

Condition: like new (used), Year of construction: 2012, operating hours: 10 h, functionality: unexamined, machine/vehicle number: 50022358, laser power: 200 W, overall weight: 1,000 kg, The machine has never been in operation and is therefore like new. I have never started it myself, so I cannot say much about it. If the buyer is familiar with the machine, it may be possible for us to connect it to power before purchase. Kedpfx Asx It Abjm Eolr

Condition: ready for operation (used), Year of construction: 2022, total height: 455 mm, overall weight: 63 kg, This EPILOG Laser Fusion Edge 12 30watt fiber was manufactured in 2022. It features a 610x305mm work surface and a maximum Z-depth of 178mm. The machine operates with a 30-watt fiber source and achieves speeds up to 120 IPS (3.05m/s) with 5G acceleration. Weighing 63kg, it's designed for precision in fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the EPILOG Laser Fusion Edge 12 machine we have for tact us for more information. Kodpox U Tmgsfx Am Ejlr Additional equipment • Source: 30-watt Fiber • Speed: 120 IPS (3.05m/s) with 5G acceleration Machine Benefits Technical Machine Benefits • Maximum z-depth: 178mm • Work surface: 610x305mm Extra Information Machine still under power Dimensions Machine Depth 1003 mm