Year of construction: 2001, condition: used, Offered is a concrete block making machine with servo-driven vibration. Control: S7, retrofitted in 2016 according to documentation, additional hydraulic unit for the tamper head, digital position measurement for the mould and tamper head, main mix filling box, documented upgrades: 2016: conversion to servo-driven vibration and S7 control, 2017: digital position measurement for the mould and tamper head plus new main mix filling box, 2020: additional hydraulic unit for the tamper head. Inspection possible by arrangement. Gbedpfx Ae Ai Hcleanow

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Bystronic Swivel Crane - Model: SSK2 - Year: 2015 - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Gsdpfx Aajz Dphgensbw Bystronic Suction Device - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Disassembly and installation can be performed by our service team upon request. Immediately available.

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. Gsdpfjz Ihikjx Aanebw * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: good (used), Year of construction: 2006, functionality: fully functional, 10 cup wheels vertical glass grinding machine min. glass size : 40 x 40 mm glass thikness : 2 - 30 mm speed : 0,35 - 5,4 m/min. machine dimensions : 7900 x 1200 x 2900 mm Gbedpszz Hirofx Aansw worki,g height from conveyor : 850 mm power : 30,5 Kw weight : 4100 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 34608, total width: 3,700 mm, total length: 7,200 mm, overall weight: 3,500 kg, input voltage: 400 V, input frequency: 50 Hz, Air cushion table with breaker bars – tiltable with support Gbedpfxez D H A Is Aansw Breaker bars: 3x X 2x Y

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table Gsdpfez N Dqusx Aansbw for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Godpoycvxmofx Aanjbw Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 2,000 mm, total width: 1,100 mm, total height: 2,150 mm, overall weight: 122 kg, Glass transport frame Dimensions: 2000x1100x2150 mm (LxWxH) Maximum load capacity: 1,500 kg Loading height: 2,000 mm 4 units available. Gbsdpfo Ahgwxjx Aanow

Condition: excellent (used), Year of construction: 2001, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 361-006203, total length: 8,300 mm, total width: 1,700 mm, total height: 3,000 mm, input voltage: 400 V, overall weight: 3,400 kg, power: 10 kW (13.60 HP), Lisec VL-1N/20 sealing robot, year 2001, for double and triple glazing, consists of the following: RTVN-15/20VFE, sealing robot infeed conveyor with glass unit measuring device (glass and spacer frame) VL-1N/20, sealing robot, for sealing double and triple units up to a total unit thickness of 52 mm and unit size up to 3.5 x 2.0 m Gjdpsx Syhlofx Aanebw The machine is in good condition. It has been installed and operational with us since 2013. Regularly serviced and fully functional. Inspections in operation are possible until 28.02.2026. It will then be dismantled and ready for sale (loading). The machine is available for collection from 01.03.2026.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Thickness: 3-12 mm Gbsdpoz Ihfxofx Aanew Hole diameter: 6-40 Working height: 600 ±50 mm Power: 22 kW

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total length: 1,470 mm, total width: 1,100 mm, total height: 1,800 mm, overall weight: 160 kg, Sorting trolley for glass panes Gbodpfxe Agu Uro Aanew 60 compartments Glass thickness: 3 - 12 mm Maximum load: 2,000 kg Price is per unit!

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. Godpfoz Ngyrex Aanjbw New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: excellent (used), Year of construction: 2013, 4 axes CNC work center for max. glass sizes : 3250 x 1620 mm for edging , milling and drilling and engraving one 14 positions rotating tool change . spindle power : 15 kw Gjdpfx Aez I Rgloanobw spindle speed : 12000 rpm weight : 6450 kg

Condition: excellent (used), Year of construction: 2014, 3 axes CNC work centrer for max. glass sizes : 1250 x 2450 mm Gbodpfx Aaoz I N Ihonow for edging , drilling and milling . working videos can be send on demand .

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 24 V, type of input current: DC, Equipment: documentation/manual, Sigmatek Central Processing Unit DCP646, new part originally packed 100MHz, 2MB memory Gsdpfxjzhg Ibe Aanobw HW: 5.6 X1.1 SW: 97030C-72

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total length: 23,700 mm, type of input current: AC, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / Glaston, ProConvection-2448-CTS-20-R 3,8 – 19 mm, 2400 x 4800 mm, Right – Left. Year: 2005. Gbedj Agwh Ijpfx Aanow With convection (Low-E glass). Noise reduction cabin included. 400 V, 50 Hz, total power: 1747 kW (heating 1100 kW, motors 647 kW) In good technical condition. Inspection during production is possible by appointment. Available: DECEMBER 2026

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, total width: 2,600 mm, total length: 18,000 mm, total height: 3,620 mm, input voltage: 400 V, input frequency: 50 Hz, The ADL 2500/6 INOX is a fully automatic production line for the manufacture of insulated glass. The line consists of a stainless steel washing machine and a panel press and is designed for efficient, precise, and reliable processing of insulated glass. The washing section is entirely made of stainless steel and equipped with six individually controlled brushes, suitable for processing Low-E glass. Thanks to the automatic glass thickness detection and the servo-controlled panel press, a constant and high-quality result is guaranteed. Year of construction: 02/2024 Maximum glass size: 2,500 × 3,210 mm Minimum glass size: 240 × 400 mm Insulated glass thickness: 10 – 60 mm Washing machine glass thickness: 3 – 12 mm (without adjustment) Maximum glass weight: 400 kg Power supply: 3 × 400 V + N + PE, 50 Hz Godpfx Aezzczdoanobw Installed power: 43.5 kW Air pressure: 6 bar Air consumption: 70 l/min Transport speed: 0 – 6 m/min Dimensions (L × W × H): 21,000 × 3,300 × 3,530 mm Machine weight: 7,580 kg Direction of operation: left to right Complete stainless steel washing section Enclosed washing unit with sound insulation Six individually controlled brushes for Low-E glass Automatic detection of glass thickness Electric panel press with servo-controlled pressure regulation Touchscreen control (English or Italian) Industry 4.0 ready (OPC UA compatible) Output conveyor belts with dual speed for higher productivity Available from mid-September 2026. If interested, you can contact Carmen Ernest directly for a viewing or additional information. +31 6 14334647

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP Gjdpfx Aaez Dt T Tenebw including air compressor and dryer . voltage : 230/400 V 50 Hz

Condition: used, Year of construction: 2019, Used straight-line glass edging machine, NEPTUN, Model Rock 11, Year 2019. Godpfsz H I E Nex Aanjbw

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total width: 7,500 mm, total length: 35,000 mm, overall weight: 32,000 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec combination line for jumbo-sized sheets with automatic storage and loading table: Configuration: LBR - ATF - GFB RE S - LKT - BHK Gbsdpfx Aajz Abahensw

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Hegla EcoLam 37 Plus: Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) Gbsdpfez Apcwjx Aanow 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm - LKTR area: 7,000 mm

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Gsdpfx As Af Aqwoanebw Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 5,886 mm, total length: 12,432 mm, overall weight: 11,100 kg, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, 548LAM-38: 3800mm automatic bridge, 20mm breakout, short heating element, automatic blade. Opty-Win-Cad/M optimization, labels, shape catalog, CAD (on-board machine PC). Manual tilting arms, cutting option 10+10 and 12+12mm, 0 kit for minimum size (350x300mm) in automatic mode, fully automatic compact packing 38: Belts on TTS module, rotation transport vacuum cups, and diagonal cutting automatic. Cullet bin & 1 additional table with pivoting wheels included (1500x800mm). 6850Kg Gbedpfozu Iqkjx Aanew 363BCS-J: Tilting motion assembly, PPL label printer with glass cleaning kit before labeling, breakout bars, Sonar kit for special glass reading. Opty-Win-Cad/M optimization, labels, shape catalog, CAD (on-board machine PC). 4250Kg

Condition: used, Year of construction: 2019, functionality: fully functional, LISEC INSULATED GLASS LINE – Year 2019 Gsdpfj Airm Isx Aanebw LISEC INSULATED GLASS LINE H 2500 mm L/R Max. glass size: H 2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Thickness of flexible spacer: 8-25 mm Consisting of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes LISEC RSVN-35/25U - automatic vertical inspection and positioning station for spacer frames LISEC VSA-35/25 - fully automatic vertical system for applying flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner LISEC FPS-35/25U2B - Fully automatic vertical press for laminating, flat pressing, and gas filling (argon or krypton) LISEC VL-1N/25 - Fully automatic vertical extrusion and sealing robot LISEC DOS-1 TH Mixing and Metering Unit

Condition: used, Year of construction: 2008, functionality: fully functional, Stefiglass Sprint 1600 1600mm vertical glass washing and drying machine. Working direction: right to left Max washable glass height: 1600mm Number of brushes: 4 (not for Low-e glass!) Drying fan Stainless steel cabin Water heating Gbsdowk Up Uspfx Aanjw Backlighting Stop sensor The machine is in used condition as shown in the pictures, it can be viewed at our location!