Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm Lsdpfx Ajxur Ndjh Ueta MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Year of construction: 2002, condition: good (used), Lifting capacity: 500 kg. The system requires new push buttons for operation. External dimensions: Width: 1800 mm. Ltedpfxoxyqqke Ah Uja Height: 1800 mm. Depth: 650 mm. Weight: 125 kg. Condition: good, second-hand

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Ltodexg Nxyopfx Ah Uea

Condition: used, functionality: not functional, Bovone 371 glass beveling machine, disconnected and ready for loading. Working daily until recently, but limited to around 1m length of glass, due to needing some belt renewals. Now breaking for parts, all available for sale. Prices subject to part required. Ltjdexbq Dyspfx Ah Uea

Condition: excellent (used), Year of construction: 2002, operating hours: 50,000 h, functionality: fully functional, type of input current: three-phase, The machine is fully operational, in excellent condition, ready for collection in Wrocław. Ljdpjx Ewzpsfx Ah Ueta

Condition: used, • Bohle glass clamp for crane, Ltsdsxvytmopfx Ah Uea • Maximum size: 6000 x 3210 mm • Glass thickness: 4 - 15 mm • Load capacity – max. 600 kg • Price on request

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, working height: 950 mm, conveyor belt speed: 833 mm/s, conveyor belt thickness: 7 mm, cylinder diameter: 190 mm, TECHNICAL DETAILS Working dimensions: 70 - 4000 mm Leg length: 5.0 mm to 12.0 mm Profile height automatic: 4.0 mm to 24 mm Profile height manual: up to 35 mm Butyl cylinder Butyl cylinder diameter: 190 mm Butyl cylinder length: 250 mm Butyl cylinder volume: 7.5 l Operating temperature butyl: 100°C to 140°C Ltsdpfexur Awex Ah Uja MACHINE DETAILS Working height: 650 mm to 950 mm Conveyor belt height: 0 mm to 7 mm Conveyor speed: 5 m/min to 50 m/min Connected load: 5 kW Compressed air consumption (for 1 m × 1 m frame): 23 standard litres Air consumption when refilling butyl: 300 standard litres/min Pneumatic input pressure: 6.5 bar to 8.0 bar Pneumatic operating pressure: 6.5 bar Maximum butyl extrusion pressure: 280 bar Maximum operating pressure: 300 bar EQUIPMENT Butyl cylinder Conveyor belt Pneumatic system

Condition: good (used), Year of construction: 2002, Lifting capacity: 1100 kg. Ltedpfxexyqpaj Ah Usa Includes 2 plug-in additional suction devices and storage rack. External dimensions: Width: 1950 mm. Height: 1800 mm. Depth: 300 mm. Weight: 146 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). Lodpex Elpbsfx Ah Ueta The machine is in good working order and will be available early in 2026 (appr. end of January)

Year of construction: 2017, condition: refurbished (used), Lamination oven 4 tables, max glass size 3600*1800mm Lodpfxeilldfj Ah Usta

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, Equipment: rotational speed infinitely variable, Bavelloni VT1250SA horizontal double head glass drilling machine, in very good working condition, year 2017. Immediately available. Lodpfx Asxtvbheh Usta

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 6,600 mm, total width: 1,000 mm, total height: 2,500 mm, input voltage: 380 V, I. SINGIP PERIMETER GLASS GRINDER MODEL SZM 8 Perimeter glass grinder from SINGIP (China), model SZM 8 (6 peripheral wheels), year of manufacture: November 2021 – designed for grinding the edges of flat glass sheets of various sizes and thicknesses. The first three diamond wheels are used for coarse and fine grinding; the remaining three wheels are for polishing the glass. Depending on the selected wheel set suited for the glass thickness, the required edge profile (BEVEL or Pencil Edge) is obtained. The grinder is in very good condition—ideal for quick processing of glass with consistent thickness, currently dismantled. Model: SZM 8 Minimum dimensions of workpieces: 100 x 100mm Glass thickness: 3–12mm Processing speed: 0.5m/min to 2.5m/min Dimensions (Length x Width x Height): 6600 x 1000 x 2500mm Installed power: 16kW Power supply: 380V, 50Hz Ltodpsw T Rphsfx Ah Uja

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, temperature: 250 °C, power: 30 kW (40.79 HP), Curing oven with two chambers (one programmable heat cycle per chamber)! Equipped with conveyor belt and cleanroom classification! TECHNICAL DETAILS Process area (minimum): 1,700 x 1,400 mm (2.40 m²) MACHINE DETAILS Electrical Data Main power supply: 3x400 V ±5%, 50 Hz ±5% Control voltage: 230 Vac 50 Hz and 24 Vdc Main fuse: 140 A Motor Output Circulating fan motor: 2.2 kW (2 units) Ljdpfxsxurt Aj Ah Uota Drive motor for vertical transport: 0.39 kW Drive motor for horizontal transport: 0.09 kW Heating Heating type: Electric with sealed tubular elements Output: 30 kW per chamber Temperature range: 50 °C to 250 °C EQUIPMENT Conveyor system Cleanroom classification

Condition: good (used), Year of construction: 2001, Lifting capacity: 500 kg. Extendable suction arms. External dimensions: Width: 1900 mm. Height: 1750 mm. Depth: 850 mm. Ljdpfx Aoxyqm Eoh Ujta Weight: 120 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 2002, functionality: fully functional, manual Lisec desiccant filler A1RL, year 2003, for filling of aluminium spacer from 6-24 mm with at least one right angle Ledpfxex Ea Nto Ah Uota

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Ltodpfjwplgbjx Ah Uea Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Ltjdpfx Ahoxurtis Uea Power: 45 kW DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Dimensions of the control cabinet: 1,000 x 480 mm

Condition: good (used), Year of construction: 2002, Lifting capacity: 500 kg. Swivel: horizontal/vertical External dimensions: Width: 2100 mm. Ledpjxyqlnefx Ah Ueta Height: 1300 mm. Depth: 750 mm. Weight: 100 kg. Condition: good, second-hand

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Ltedsxurq Uspfx Ah Uea Machine type: Manual edge stripping system Alignment: Aligned against stop rails Fixation: Integrated suction cup for fixation EQUIPMENT Side table for manual edge decoration Side-guided sanding heads Manually adjustable sanding pressure

Condition: good (used), Year of construction: 2008, Lifting capacity: 800 kg. Suction bars can be extended sideways. External dimensions: Width: 3100 mm. Height: 2150 mm. Depth: 1200 mm. Ltodpfxjxyqlbs Ah Uja Weight: 323 kg. Condition: good, second-hand

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width (max.): 2,550 mm, section length (min.): 700 mm, TECHNICAL DETAILS Working dimensions min.: 700 x 300 mm Working dimensions max.: 3,300 mm to 2,550 mm MACHINE DETAILS Required space: 6,308 x 2,830 mm Lsdpfx Aoxurpkoh Usta EQUIPMENT Low grinding table Swivelling loading arm Manual cutting system Note: Further information regarding the machine layout can be found in the attached images.

Condition: good (used), Year of construction: 2001, Lifting capacity: vertical 400/550 kg, horizontal 400/550 kg. Lodoxyqiyopfx Ah Uota Includes 4 additional suction cups for lateral extension, if required. External dimensions: Width: 2200 mm. Height: 1800 mm. Depth: 1150 mm. Weight: 224 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 1992, 8 spindle system Length: approx. 6000 mm Ledpfx Aerx T Ehsh Ujta Depth: 1300 mm Height: 2600 mm

Condition: excellent (used), Year of construction: 2000, System for glass sizes up to: Height 3200 mm, length 5500 mm. Double/triple glazing. Ledpfexpnfqsx Ah Usta Max. package thickness: 57 mm. Main components of the system: Washing machine with water treatment, inspection station, gas filling press, cork applicator, automatic sealing. System cannot handle stepped elements. Total length of the system: approx. 35 m. Condition: very good, used

Condition: good (used), Year of manufacture: various years of manufacture Load capacity: approx. 1500 to 2000 kg. Max. loading height: 1600 / 1770 mm Ljdpfx Ahjxw Uy Rj Usta External dimensions: Width: 2300 mm. Height: 2120 mm. Depth: 900 mm. Condition: good, second-hand