Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call. Tsdpoz Rztvjfx Abusd

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Tedpfx Ae Afxi Ajbujd Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Year of construction: 2024, condition: used, CoolTemper PowerJet TCF-GTH-96.144-PJ4 Convection Flat Glass Tempering Furnace Serial no: H358 (2024) Maximum temperature: 750 degree / Operating temperature 700 degree, Min Glass Size 120 x 320mm, Max Glass Size (4-5mm) 1650 x 2400mm, (6mm) 2150 x 3650mm, (8-19mm) 2440 x 3650mm with Roller Loading/Unloading Tables, Cooltemper GlassScan heat map scanner, Overhead Platform/Fan Room, Cooltemper SMART IMMI Control Location: This lot is located in Wellingborough, Northamptonshire, UK Todpfx Ao Afwrbsbued

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Tsdpfx As Afwtgjbusd Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Tsdps Afwwgefx Abuod Location: These lots are located in Wellingborough, Northamptonshire, UK

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 80317, input voltage: 380 V, travel distance X-axis: 4,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 235 mm, Machine full working order use every week Tsdpfxoy Au Rpo Abuod

Year of construction: 2023, condition: used, Yinrui (Anhui Yinrui Intelligent Technology Co Ltd) model YR-4228 Automatic Glass Loading Machine. Serial no: 232839 (2023) Size: 4400 x 3150 x 900mm 6- heavy duty feed racks Yinrui (Anhui Yinrui Intelligent Technology Co Ltd) model YR-4228 automatic glass cutting machine. Serial no: 233104 (2023) Size: 5000 x 3400 x 900mm with edge detection Yinrui (Anhui Yinrui Intelligent Technology Co Ltd) model YR-4228 glass breaking table. Serial no: 232879 (2023) Size: 4200 x 3000 x 900 Location: These lots are located in Wellingborough, Northamptonshire, UK Tjdpfs Afwu Ssx Abued

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 6,490 mm, total width: 3,220 mm, Bottero CNC Year - 2022 Model - Pratica Plus 3300 Tedpfxoydbige Abujd Automatic tool changer Complete with all tooling and spares Excellent condition as it has done minimal work Delivery and Installation available.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,800 mm, Bavelloni Straight Line Edger Model: VE500 11 11 Spindle Tedpfx Asydc I Dsbued Excellent condition Delivery and Installation available

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Tjdpfx Abeyc Uq Ijuod Model - 630 CBM and 353BCS-R 4 station double loader Cutting , grinding, marking and breakout. Tilt function Shape scanner Perimeter fencing for loader Delivery and Installation available.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. Tedpoz Ernlofx Abuod • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, total length: 40,000 mm, total width: 4,000 mm, total height: 4,500 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 48,000 kg, type of input current: three-phase, Equipment: documentation/manual, Complete line for the production of single and double-pane insulated glass units, including: Automatic bending machine for frames FB-H PC system Automatic spacer filling machine DF-R-V Automatic insulated glass production line IGL-G-H2 (with automatic argon filling at a minimum level of 90%) Tedjz Ihhtepfx Abusd Automatic sealing robot (two components) ASR-H2.5 Butyl applicator BE-A Rotating table RT-A Frame transporter Technical data: 1) Power supply: AC380V, 50Hz, approximately 45KW 2) Air pressure: 0.6~0.7MPa 3) Dimensions: 33250(L)×3000(W)×3000(H)mm 4) Max. load: insulated glass unit approximately 850kg, suction side approximately 400kg 5) Min. glass size: 450×350mm 6) Max. glass size: 5000×2500mm 7) Insulated glass unit thickness: 14~70mm 8) Working height: 530±30mm 9) Transporter speed: 35m/min 10) Inclination angle: 6°~8° 11) Glass thickness: 4-15mm 12) Bristle diameter: 0.12mm 13) Max. washing speed: 0-10m/min adjustable 14) Average expected output: 1 m2 (1000x1000mm) of rectangular insulated glass units with the configuration (6mm+9A+6mm), for example, approximately 550 units per 8 hours with automatic gas filling, approximately 650 units per 8 hours without gas, for single-pane units (depending on the current factory situation and employee efficiency).

Condition: reconditioned (used), Year of construction: 2006, operating hours: 35,435 h, functionality: fully functional, total length: 5,940 mm, total width: 1,800 mm, total height: 2,400 mm, year of last overhaul: 2023, Completely overhauled by the main dealer with genuine parts in 2023. Was hardly used, and looked after throughout. Todpfx Aevw At Aobued The machine has been hardly used and it is fully operational and ready to go. Transport is not included, but can be arranged for a fee. Subject to location.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total length: 1,470 mm, total width: 1,100 mm, total height: 1,800 mm, overall weight: 160 kg, Sorting trolley for glass panes 60 compartments Glass thickness: 3 - 12 mm Maximum load: 2,000 kg Price is per unit! Tjdpfxj Agu Urs Abuod

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. Todpjz Rvi Esfx Abuod General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 460 mm, total length: 2,000 mm, total height: 1,750 mm, warranty duration: 12 months,  Power of Phoseon FJ/100 one UV LED lamps, 150 mm. 8 Watt  Radiating unit – width x height: 150 x 200 mm.  Steel slat conveyor belt with a 360° rotating part system and one UV LED lamp. Tedpj Afdaajfx Abuod  Conveyor belt speed: 5/14 m/min  Maximum height of incoming objects: 160 mm  Maximum diameter of incoming objects: 120 mm  Belt length: 1500 mm  Maximum operating temperature of UV LED (COLD)  Power supply: 220 Volt – 50/60 Hz  Dimensions: 2000 x 460 x 1750 mm

Condition: used, Year of construction: 2007, functionality: fully functional, input current: 73 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Glaston Bavelloni MTS64 glass cutting desk, year of construction 2007. Tjdpfsyzxf Uex Abuod Voltage: 400 V Phase: 3 Frequency: 50 Hz Power: 29 kW Current: 73 A If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,680 h, functionality: fully functional, total length: 7,003 mm, total width: 1,920 mm, total height: 2,300 mm, overall weight: 2,710 kg, input frequency: 50 Hz, input voltage: 400 V, 8 cup wheels vertical glass grinding machine total number of working meters : 45716 min. glass size height : 35 mm glass thikness : 3 - 40 mm Todez N Dk Uepfx Abuod speed : 0,5 - 5m/min work piece weight : 200 kg/m power : 20 Kw

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, INTERMAC Genius 61 CT-RED CNC Glass Cutting Line with MOVETRO Genius 61 LS-BL Loader & 12 Jumbo Racks (2019) Tedpfx Aj Af E Hbjbusd Key Technical Data Category: Glass processing machinery / CNC Glass Cutting Table Manufacturer: INTERMAC (Biesse S.p.A., Italy) Line designation: INTERMAC Line of Machines Line serial number: 1000027954 Year of construction: 2019 Glass format: Jumbo size Total installed power: 28 kW Air consumption: 800 Nl/min Condition: Used, excellent / very low working hours Certification: CE marked System Components & Specifications 1. CNC Float Glass Cutting Table: Model: INTERMAC GENIUS 61 CT-RED Serial number: 1000029755 Electrical connection: 400 V / 50 Hz / 3 phases Full-load current: 27.45 A Power: 14.7 kW Control: Standalone PC control console with screen and keyboard 2. Automatic Double-Sided Loader: Manufacturer: MOVETRO s.r.l. (Italy) Model: GENIUS 61 LS-BL Serial number: M18137 Year of manufacture: 2019 Power: 6.0 kW Pneumatic working pressure: 7.0 bar Total weight: 4,600 kg Suction system: Integrated suction cups for automated loading from both sides 3. Glass Storage System: 12 heavy-duty A-frame racks designed for Jumbo glass storage Rail guide tracks for automated loader traversing 4. Break-Out / Service Table & Safety: Break-out table model: GENIUS 61 BT (Serial number: 1000027756) Full perimeter safety fencing and interlock safety systems

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: Todpfxow H R A Nj Abuod additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic in automatic cycle 6.6 kW / 9 HP (S6) electric spindle Remote service system Cable remote control for easier positioning and adjustment Robot: Automatic loading and unloading system for glass panels Loading and unloading trolley with locking wheels Mechanical/electronic device on the robot head to center the workpiece on the work surface Pneumatically retractable workpiece stop various double vacuum suction cups various tool sets incl. FILTRAGLASS ECO-BOX CNC grinding coolant cleaning system incl. Stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter unit approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection to be provided on site, 7-8 bar (480 Nl/min) Dismantling/removal must be carried out by the buyer.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Listing Title Complete Glass Laminating Line PUJOL LAM/PRO T TRA (50x28) with Overhead Crane, Steel Structure & EVA Dispenser (2019) Key Technical Data Category: Glass processing machinery / Glass laminating ovens Manufacturer: HORNOS INDUSTRIALES PUJOL S.A. (Barcelona, Spain) Model: LAM/PRO T TRA Manufacturing Serial Number: 19/244 (Year of manufacture: 2019) Capacity / Max Glass Size: 50x28 (approx. 5,000 x 2,800 mm) Installed Heating Power: 182 kW Maximum Operating Temperature: 160 °C Operating Voltage: 380 V (3-phase) Certification: CE certified Condition: Used, excellent / very low working hours, fully assembled and ready for inspection Scope of Delivery & System Configuration 1. Multi-Chamber Vacuum Laminating Furnace: Brand/Model: PUJOL LAM/PRO T TRA Features: Multi-level EVA vacuum laminating chambers, high thermal efficiency, independent electrical control cabinet, and exhaust cooling fans. 2. Hydraulic Scissor Lift Table:Rail-guided mobile lifting table designed for seamless loading and unloading across all furnace levels. 3. Overhead Crane & Supporting Steel Gantry Structure:Free-standing heavy-duty steel structure with runway beams and columns spanning the processing line. Overhead crane hoist for handling and positioning large glass panes. 4. PUJOL EVA Film Unwinding & Cutting Station:Dedicated freestanding foil dispenser unit equipped with pneumatic tensioning and an integrated operator control panel. 5. Auxiliary Assembly Tables:Multi-directional caster/roller conveyor tables for smooth pane alignment and transfer. Todpfx Aj Af E S Dobuod

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 5,650 mm, total width: 1,600 mm, total height: 2,520 mm, overall weight: 1,500 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, vertical glass wasching machine 1600 mm OPEN TOP working direction : from LEFT to RIGHT Todpfxoz Dt Rfe Abujd min. glass size : 350 x H100 mm max. glass weight : 200 Kg in- en outlet conveyor size : 2000 mm working height : 550 mm glass thikness : 3 - 15 mm number of brushes : 4 brushes diameter : 120 mm speed : 0,5 - 5 m/min . total power : 7 kw machine body in stainless steel

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Listing Title INTERMAC Vertmax 2.6 Vertical CNC Glass Working Center (2019) – 60 kW / 11,000 kg Key Technical Data Category: Glass processing machinery / Vertical CNC Machining Center Manufacturer: INTERMAC (Biesse S.p.A. Glass & Stone Division, Italy) Model: VERTMAX 2.6 Year of construction: 2019 Serial number (Matricola): 1000029696 Total power: 60 kW Power supply voltage: 400 VAC / 3-phase / 50 Hz Todpfxs Af Ha Ae Abujd Full-load current: 112.03 A Pneumatic air supply: 7 bar Water supply pressure: 3 bar Total machine weight: 11,000 kg Certification: CE compliant Condition: Used, excellent / very low working hours, fully assembled Machinery Overview & Specifications High-Speed Vertical Processing: Capable of complete glass edge processing in a single pass: grinding, polishing, milling, drilling, countersinking, and hardware notch cutouts. Vertical layout minimizes footprint, prevents scratches during handling, and allows easy pane inspection. Maximum workable glass height: up to 2,600 mm (Vertmax 2.6 series). Tool Management & Clamping:Integrated multi-position automatic tool change magazine. Heavy-duty motorized suction cup vacuum clamping carriage for total stability during high-speed cutting and milling operations. Handling & Support System:Motorized infeed and outfeed vertical roller conveyors with non-marking support pads. Complete closed-circuit cooling water management and drainage connections. Control Terminal:Freestanding ergonomic PC control console equipped with graphical user interface, color display, and intuitive machining macro software

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1639, Galvanized storage system with 12 slots, designed for DLF-sized items. Todpfxs Agu Sdo Abusd

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Tedpozu Nvzofx Abujd Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.