Amikon GmbH

Condition: used, Analytik Jena Analytik Jena SPECORD 50 Powerful UV VIS spectrophotometer with double beam mode using SBT (Split-Beam Technology) Excellent signal-to-noise ratio Incredibly fast measurements Exceptionally low identification limit High short- and long-term stability Iolhswr A Hwscdw Aoth No warm-up phase Scanning of spectra as well as measurements at fixed wavelengths Technical Data – SPECORD® 50 Wavelength range 190 – 1100 nm Photometric display range -8 to +8 absorption units (A) Photometric measuring range –3 to +3 A Wavelength accuracy Better than ±0.3 nm Wavelength repeatability Better than ±0.1 nm Stray light < 0.03% transmission at 220 nm (NaI, according to ASTM) Spectral bandwidth 1.3 nm at 500 nm Photometric accuracy ±0.003 A at A = 1 Photometric repeatability ±0.0003 A at A = 1 Long-term stability (500 nm) Better than 0.0005 A/h Scan speed Up to 6000 nm/min Power supply 110 or 230 V ±10%, 50/60 Hz Weight: approx. 22 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) We are happy to answer further questions by phone.

Condition: used, Keyence Type: VHX-5000 Only 10 operating hours! Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines Itelhcdewr Ax How Aeh 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Zeiss Type: WMM 85 ZEISS WMM 850 Coordinate Measuring Machine Reference probe stylus Touch head VAST XT Gold Probe changer unit (All cables renewed. Current control console and computer unit!) The vibration damping (with compressed air) is an additional option from Zeiss and is integrated in the machine’s base frame. This makes the measuring machine extremely accurate. ZEISS WMM 850 Coordinate Measuring Machine – a solid and proven CMM with portal design for precise metrology and high stability. Technical data: Measuring volume (X × Y × Z): approx. 850 × 1200 × 600 mm, depending on version between 800–850 mm in X, 1200–1800 mm in Y and 500–600 mm in Z Repeatability / resolution: approx. 1 µm with Zeiss ST/VAST sensors; Linearity uncertainty according to ISO is ±(2.9 µm + L/250 mm) Volume accuracy: ±2 µm + L/300 mm Speed: movements up to 600 mm/s, accelerations around 1 m/s² Machine weight and dimensions: approx. 3.5 t; dimensions approx. 3 × 2.5 × 3 m (L × W × H) Table often ~2740 × 1000 mm Electrical & Environment: 230 V, 50 Hz; Ideal temperature range: 18–26 °C ±0.5 °C (partly up to 30 °C) Control and Software: Microcomputer control C99/MCC800 Zeiss C99 / UMESS, Software: CALYPSO 2015 incl. Dongle Features & Applications Portal structure on granite base ensures excellent rigidity and long-term stability. Ideal for medium to large components. Air-bearing linear axes enable smooth movements and high measuring precision. VAST XT sensors plus touch-trigger provide flexibility from tactile to 3D scan for complex geometries. Software integration: CALYPSO offers intuitive programming and CAD interfaces. Suitability The ZEISS WMM 850 is ideally suited for: Measuring medium to large precision parts Parts with tight tolerances ( Itolhswrc A Secdw Ash

Condition: used, Vötsch Type: VT 7004 Vötsch Temperature Cabinet Air-cooled Islhcowq R Dzsdw Aoth Internal dimensions: Width 320 mm Depth 290 mm Height 400 mm External dimensions: Width 920 mm Depth 800 mm Height 600 mm Temperature cabinet approx. 37 liters Temperature range -70°C to +180°C Pipe feed-through: Feed-throughs: 85 mm ∅, 125 mm ∅ Mains voltage 230V +6/-10% 1/N 50Hz Rated current 10 A Rated power 2 KW RS232 Refrigerant R-452A / R-23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data may occur!) We are happy to answer further questions by phone.

Condition: excellent (used), Vötsch Type: VTM 7004 Technical Description Temperature Test Chamber, Air-cooled Test chamber volume approx. 37 liters Specifications for temperature tests Temperature deviations in steady state according to IEC 60068-3-5 Temperature range -70°C to +180°C, non-continuous Temporal temperature fluctuation at the center of usable space ±0.2 K to 0.5 K Spatial temperature deviation ±0.5 K to 1.5 K corresponds to temperature gradient 1 K to 3 K Rate of temperature change according to IEC 60068-3-5 Heating: 5.3 K/min Cooling: 4.7 K/min Heat compensation max: 500 W Calibration values +23°C and +80°C Data for installation and operation Test chamber dimensions Width 320 mm Depth 290 mm Height 400 mm Installation space Width 1000 mm Depth 780 mm Height 630 mm Tube port: 1 tube port, diameter 80 mm, installed on the left Cooling unit: Low-noise fully hermetic refrigeration unit, air-cooled Control terminal: Mincontrol Backlit display Plain text display Password protection Input of constant values; recall of stored test programs Software temperature limiter for min. and max. test chamber temperatures Error plain text message Islewq Rl Sjhcdw Asth Control: Microprocessor-controlled control and monitoring system MINCON/32 32-bit technology Integrated program generator Error diagnostic system Program memory for 100 programs with a total of 1000 segments, 250 loops and 9999 cycles Interface RS 232 For communication with customer computer, Networking of up to 32 devices optionally possible via RS 485 Electrical connection: Rated voltage 1/N/PE AC 230V ±10% 50Hz Rated power 0.9 kW Rated current 6.0 A Plug: CH plug, type T23 Connection cable 4.5 m Fuse 16 A slow-acting, provided by customer Refrigerant R-404A/R-23 Weight: 140 kg net Type: VTM 7004 For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer further questions by phone for you.

Condition: excellent (used), Heraeus / Thermo Type: WU 6100 Heat-drying oven with recirculating air 500°C Description Heat and drying oven Heraeus WU 6100 up to 500°C Recirculating air oven for thermal testing of high-quality materials. For precise heat treatment processes up to 500°C Offers precise and even temperature distribution as well as exact maintenance of the selected temperature. Technical data: Internal volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Equipment: Temperature controller with digital display Over and under temperature protection Throttle for stepless fresh air and exhaust air regulation Timer Speed control for the recirculating fan Stainless steel inserts Condition: used Ijlhcdewq Rl Ejw Aeth Scope of delivery: (See image) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch temperature test chamber water-cooled System converted to R-452A Temperature range -70°C to +180°C Temporal temperature deviation ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: width 580 mm depth 450 mm height 750 mm External dimensions: width 870 mm depth 1280 mm height 1575 mm Test chamber volume 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Ielhcswq Iymodw Aeth Rated power: 100 kW Rated current: 21 A Fuse, customer side: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) Side feedthrough 50 cm / 125 cm Chamber is water-cooled Refrigerants: R-452A and R 23 Weight approx. 460 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, information are reserved!) We are happy to answer further questions for you by phone.

Condition: good (used), Leica Leica LED2500 Leica S8 APO Stereo Microscope + EC3 Digital Camera – High-Resolution Complete System Professional microscope system – Ideal for industry, education & research Technical data – Leica S8 APO: Zoom ratio: 8:1 (1× to 8× zoom) Magnification: up to 80× (depending on eyepieces) Optics: Apochromatic – maximum color fidelity and image sharpness Depth of field: up to 70 µm, Resolution: 300 lines/mm Working distance: 75 mm – ideal for micromanipulation Viewing angle: ergonomic 38° Camera port: 100% light output for optimal image quality Technical data – Leica EC3 Camera: Resolution: 3.1 megapixels (2048 × 1536) Sensor: CMOS, 1/2.5" Color depth: 24 bit RGB Live image: up to 15 frames per second Connection: USB 2.0 / C-Mount Ielhcewqppcjdw Aoth Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) We are happy to answer further questions for you by phone.

Condition: used, Leica Leica RM 2065 Leica/Jung Supercut 2065 Rotary Microtome Ijlewqnyashcdw Ajth Main features: Manual rotary microtome, suitable for paraffin blocks as well as hard samples (e.g. plastic, orthopedics) Coarse and fine feed for precise cuts with sensitive control. Motorized feed/trimming system: motorized handwheel with adjustable cutting speed and adjustable cutting window for reproducible cuts. Separate control panel for precise control and comfortable operation. Technical specifications (summary) Description: Cutting type: coarse/fine cut with manual motorized feed Cutting speed: adjustable via motorized handwheel Cutting window: adjustable, to improve cutting precision Sample holder: various holders incl. clamps, suitable for hard samples Control unit: separate real control panel Construction: stable, durable, industrial-grade Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, information reserved!) We would be happy to answer any further questions by phone.

Condition: used, dr. wiesner Type: INTEGRA DDV -1...1 bar Product description: dr. wiesner Integra leak test system The classic - for all common test procedures Islhcdjwqm Ddjw Ajth The leak test system for industrial leak-tightness and flow tests with fully graphical color display up to three independent test circuits operable 255 test programs can be stored automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test object (Test) Connection reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data, information reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Device Ijlhcdwjwqfnue Aoth For sale is a high-quality, used pendulum impact tester of type HIT5.5P by manufacturer Zwick / Roell. The device is ideally suited for instrumented impact testing according to Charpy and Izod on plastics, metals or composite materials. Device data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current pendulum energy = 5.000 J Friction = 0.017 J Friction reduction = practice swing Impact speed = 2.9 m/s Pendulum mass = 1.19 kg Release angle = 107.46 ° Pendulum length = 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Test methods: Charpy, Izod (instrumented) Data acquisition: force-time and displacement-time curves Supply: 230 V / 50 Hz Scope of delivery: Zwick Roell HIT5.5P incl. 5.5 J pendulum Control unit with control panel Power and connection cables Shipping by freight forwarding (pallet shipping) – costs on request Pickup by arrangement in Borken possible. Condition: used (changes and errors in the technical data, information reserved!) We will gladly answer further questions by phone for you.

Condition: used, TesT Iolhcswqdvqedw Asth Type: TesT P112.50kN A used universal testing machine model 112.50kN from TesT GmbH is offered, including TesTController 850 and software license for TesTWinner® 950. The machine is ideal for precise tensile, compression, and bending tests up to 50 kN in industry, research, and quality assurance. Technical data: Manufacturer: TesT GmbH, Germany Model: 112.50kN Max test force: 50 kN Drive: regulated DC motor Controller: TesTController 850 (USB) Software: TesTWinner® 950 (license available) Stroke: 1,000 mm Speed: 0 – 500 mm/min Supply: 230 V Dimensions (HxWxD): 1,380 × 695 × 440 mm Scope of delivery: TesT Model 112.50kN TesTController 850 Software TesTWinner 950 (on USB stick or PC) Connection cable Operating instructions / documentation (PDF) Condition: Used, technically tested and fully functional Optical condition: very good with slight signs of use (Changes and errors in the technical data, details are reserved!) We are happy to answer further questions by phone for you.

Condition: excellent (used), GÖTTFERT Device type: 011.01.6 Model 00.00 GÖTTFERT MI-4 Melt Index Tester | Melt Flow Indexer | Product description: For sale is a GÖTTFERT MI-4 – a high-quality melt index tester for precise determination of the melt index (MFI/MFR) of thermoplastic plastics according to ISO 1133, ASTM D1238, and ASTM D3364. The device is in very good condition, fully functional. It is ideal for laboratories, production monitoring, quality assurance, and research institutions. Main features: 5.7" color QVGA touchscreen – intuitive operation & display Multi-load measurement: Up to 8 selectable weights, ascending/descending Storage: Up to 500 test plans with 3,000 measurements each Temperature control with high-precision algorithm 0–320 °C: Resolution 0.01 °C 320–500 °C: Resolution 0.1 °C Temporal fluctuation: < 0.1 °C Spatial fluctuation: < 0.2 °C (60–400 °C), < 0.3 °C (400–500 °C) Capillary quick release for tool-free change Precise digital displacement sensor (0.006 mm) Time measurement with accuracy better than 0.001 s Electric weight lifting – no manual lifting USB connection for memory sticks & printer Serial interface for balance/MFR host LAN connection + integrated web server Technical data: Standards: ISO 1133, ASTM D1238, ASTM D3364 Channel: Ø 9.555 ± 0.01 mm, length 160 mm Capillary (standard): Ø 2.095 ± 0.003 mm / 8 ± 0.025 mm Capillary (optional): Ø 1.050 ± 0.005 mm / 4 ± 0.025 mm Itslhcdowqc Swsw Ajh Material: tungsten carbide Testing plunger: Ø 9.48 ± 0.01 mm / length 220 ± 0.2 mm Base weight: 1.200 kg (0.325 kg / 1.000 kg / 1.050 kg combinable) Additional weights: 2.16 / 3.8 / 5.0 / 10.0 / 21.6 kg (also 12.5 / 15.0 kg) Tolerance: ± 0.5 % Drive: capacitor motor with brake (150 W) Time base: 48 MHz quartz (accuracy 50 ppm) Power connection: 1 x 230 V or 1 x 115 V Frequency: 50–60 Hz Power consumption: up to 1 kW Dimensions: 700 × 450 × 1220 mm Weight: approx. 170 kg net, approx. 200 kg gross Scope of delivery: GÖTTFERT MI-4 device Standard capillary Testing piston Base and additional weights Power cable Operating instructions Condition: used (Changes and errors in technical data and information reserved!) We are happy to answer further questions by phone for you.

Year of construction: 2022, Condition: like new (used), Agilent Itjlhcjwp Embodw Ash Model: G9800A For sale is an Agilent Cary Eclipse Fluorescence Spectrophotometer – unused in original packaging (without software). As far as is known, the item was never used and is in like-new condition. The original packaging is available and may show slight storage marks. Year of manufacture: 11/2022 Agilent Technologies Cary Eclipse Fluorescence Spectrophotometer Description: The Cary Eclipse G9800A is a high-quality fluorescence spectrophotometer for research, laboratory, and industrial use. It offers exceptional sensitivity, speed, and ease of use and is ideally suited for applications in the fields of biochemistry, pharmacy, environmental analysis, and materials research. Technical data: Light source: Xenon flash lamp Wavelength range: 200–900 nm Measurement modes: Emission and excitation spectra Time-resolved fluorescence Phosphorescence Excitation-emission matrix (3D scan) Software: Cary Eclipse Software (not included) Detector: Highly sensitive photomultiplier (PMT) Scan speed: Very fast (up to 80 nm/s) Typical applications: Analysis of proteins, DNA, enzymes Detection of environmental contaminants such as PAHs Fluorescent dyes & markers Development of pharmaceutical agents Manufacturer: Agilent Technologies (formerly Varian) Model: G9800A – Cary Eclipse Fluorescence Spectrophotometer Includes: Device, power cable, manual Power supply / connection data: Power connection: IEC C14 socket (classic cold appliance plug, as used in PCs) → Connection via standard cold appliance cable Mains voltage: 100–240 V AC, 50/60 Hz (automatic switching) Power consumption: Approx. 150–200 W (depending on operating mode) Fuse: Internally installed, typically T2A or T3.15A Weight: approx. 28–32 kg Scope of delivery: (See picture) (Changes and errors in the technical data reserved!) For further questions, we are happy to answer by phone.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Itjlhcdwownpbgs Ash Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: used, Bruker Type: ALPHA II The Bruker ALPHA II is a compact and user-friendly FT-IR spectrometer (Fourier Transform Infrared Spectrometer), manufactured by Bruker Optik GmbH in Germany. It is used for qualitative and quantitative analysis of solids, liquids, and gases using infrared spectroscopy. Main features: FT-IR technology: Offers high accuracy and sensitivity in the infrared spectral range. Compact design: Ideal for laboratories with limited space; the device is portable and space-saving. Modular construction: Interchangeable measuring modules (e.g. ATR, transmission, gas cells) Iolhcdewnflbsw Aeth enable flexible adaptation to different applications. User-friendly software: Usually supplied with OPUS software, which allows easy data acquisition, evaluation, and archiving. Low maintenance: Robust design and long-lasting components ensure low maintenance requirements. Technical data – Bruker ALPHA II Feature Description: Spectrometer type Fourier Transform Infrared Spectrometer (FT-IR) Spectral range 7,500 – 350 cm⁻¹ (depending on detector and optics used) Resolution up to 0.5 cm ¹ Beam path Internally reflecting, hermetically sealed with dry air filling Interferometer RockSolid™ interferometer, maintenance-free and vibration-resistant Detector DLaTGS detector (optionally also with cooling or other detectors available) Beam splitter Germanium-gold plated (standard), other materials available as options Light source Long-wave Globar IR source Module compatibility QuickSnap™ modules (e.g. ATR, transmission, reflection, gas cell etc.) Dimensions (W x H x D) approx. 21 x 12 x 30 cm Weight approx. 7 kg Power supply 100–240 V, 50–60 Hz, < 40 W Interfaces USB, Ethernet Software OPUS Condition: used Scope of delivery: (see picture) (Changes and errors in the technical specifications, details are reserved!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Espec Type: Espec Model: TSA-101S-W Espec temperature shock chamber water-cooled Thermal shock environmental chamber (cold stress: -65° to 0°C). Conventional thermal shock chambers with three zones can be quite large, as three separate chambers are used. The TSA series has only one chamber, which greatly reduces its size. Instead, it circulates cold, hot, or ambient air as needed. The conditioned air can be pre-cooled or pre-heated beyond the setpoint, which allows a faster restoration of the desired condition after transfer. Warm chamber: +60 to 200°C, Cold chamber: -70 to 0°C Operating temperature: 0-40°C System: Two-zone or three-zone test via flap control Performance: Test range: High temperature exposure range: +60 to +200°C Low temperature exposure range: –70 to 0°C Temperature fluctuation ±0.5°C Hot chamber: Temperature heating-up time: ambient temp. to +200°C within 15 min. Chilling chamber: Temperature pull-down time: ambient temp. to –75°C within 45 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 650 x 460 x 370 External dimensions (W x H x D mm): 1550 x 1900 x 1370 Voltage: AC 400 V Phases: 3~ (three-phase) Frequency: 50/60 Hz Maximum power consumption: 50 A Refrigeration unit (refrigeration motor): 5.5 kW Heater: 6 kW Refrigerant: R404/R23 Weight: approx. 1150 kg Iolhcdjwnb Hnew Aoth For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Itslhcdwowl D Aao Ajh We are happy to answer any further questions over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Rate of Change: Temperature Deviation Temporarily ± 0.3 to ± 0.8 K Temperature Deviation Spatially ± 0.5 to ± 2.0 K Cooling Rate of Change: 18.0 °C Heating Rate of Change: 17.0 °C Test Chamber Dimensions: Width 580 x Depth 620 x Height 950 mm Itslewl Argehcdw Aeh External Dimensions: Width 870 x Depth 1895 x Height 1775 mm Side Ports: 1 x 60 mm Ø and 2 x 120 mm Ø Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 16 kW Rated current 31 A Refrigerant R452A / R23 Approx. 270 liters Weight: 835 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Mahr Type: MarSurf GD 140 BG 22 Product Information: The MarSurf GD 140 is a high-precision roughness and waviness measuring station from Mahr, designed for use in production metrology and in the measuring room. It sets new standards in surface metrology with its high speed, reliability, and flexibility. Product Features: Multifunctional: Measures roughness, waviness, and profile of workpieces. Location: Can be used in the measuring room or in close proximity to production. Software: Control via user-friendly MarWin software: EasyRoughness MarWin Software Version: V12.20-06 SP1 Areas of Application: Industry: Mechanical Engineering Typical Measurement Objects Bearings, threads, threaded rods, ball screws, shafts, gear racks Industry: Production Metrology Typical Measurement Objects Contour Measurement in Semi-Automatic Processes Industry: Automotive Industry Typical Measurement Objects Steering, braking systems, transmissions, crankshafts, camshafts, cylinder heads Industry: Medical Technology Typical Measurement Objects Contours of hip and knee endoprostheses, medical screws, and dental implants Technical Specifications – MarSurf GD 140 Feature Value / Description Resolution – Measuring Range 1 / 2.0 nm Resolution – Measuring Range 2 / 0.2 nm Start of Traverse Length (X) 0.1 mm End of Traverse Length (X) 140.0 mm Traverse Length (Lt) 0.1 – 140 mm Guide deviation 0.20 µm / 60 mm 0.40 µm / 140 mm Measuring force 0.7 mN Measuring speed 0.02 mm/s to 10 mm/s Positioning speed (X) 0.02 – 200 mm/s Positioning speed (Z) 0.02 – 50 mm/s Probe system: Roughness probe system (skidless) – without probe base Probe arm lengths 45 mm (×1) 67.5 mm (×1.5) 90 mm (×2) 112.5 mm (×2.5) 135 mm (×3) Measuring range (depending on probe length) ±250 µm (with 45 mm probe arm) ±750 µm (with 135 mm) Probe arm) Technical specifications – Dimensions: Dimensions (L × W × H) Ielhowlhwnocdw Aeth Length: 780 mm, Width: 535 mm, Height: 1240 mm Maximum workpiece weight: 90 kg Additional functions Manual TY adjustment (e.g., for lateral alignment) Total weight (gross): 196 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VTM 4004 Air-Cooled Temperature Test Chamber Temperature Range: -40°C to +180°C Temperature Differences Temperature Fluctuations in the Center of the Chamber: ± 0.2 to ± 0.5 K Spatial Temperature Deviations: ± 0.5 to ± 1.5 K (corresponds to temperature gradient) (1 to 3) Temperature Change Rate: Heating: 5.3 K/min Cooling: 6 K/min Heat Compensation: Max. 550 W External Dimensions: Width 1000 mm x Depth 780 mm x Height 630 mm Internal Dimensions: Width 320 mm x Depth 290 mm x Height 400 mm Test Chamber Capacity: 37 Liters Port: Ø80 mm Interface: RS232 Ijlhcowk In Dodw Ajth Test Chamber Lighting: Halogen Bulb 12 V, 20 W Nominal voltage: 1N/PE AC 230 V ±10% 50 Hz Nominal power: 0.7 kW Nominal current: 4.0 A Refrigerant: R-404A Weight: 115 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Itolhowit Erscdw Aoh Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and a modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. Itelhswif Rgscdw Aeh The NL-15-SQR/R operates exclusively with compressed air and is the one-size-fits-all solution for every application. The display is user-friendly. Intended Use: This heat seal press is particularly suitable for industrial applications that require precise temperature control and the ability to use smaller sealing plates (140 x 140 mm). Common applications include applying patches, transfers, or embroidery to textiles. Special Features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as other industries that require high-volume, medium- to high-temperature processing. High flexibility: The temperature range of 25 to 210°C and the adjustable timer from 1 to 240 seconds offer flexibility for a wide variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat seal press with the following technical specifications: Technical Data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (mm): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: Iolhcjwh Ttmedw Aoth 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Fries Research & Technology Device name: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series from Fries Research & Technology GmbH (FRT). These systems are designed for the non-destructive and non-contact analysis of surface parameters such as topography, roughness, coating thickness, and more. Features of the FRT MicroProf: Measurement modes: The device operates both as a 2D optical profilometer and as a 3D imaging system. A scanning method or a direct imaging sensor is used. Measurement range: Height range: Up to 3 mm, depending on the sensor used. Lateral resolution: Typically 1–2 µm, depending on the sensor configuration. Technical features: Modular multi-sensor design: Allows the combination of different sensors for different measurement tasks. High resolution: Offers measurements in the sub-nanometer range. Flexibility: Can be used for various applications in the semiconductor industry, microsystems technology, optics, automotive industry, and photovoltaics. Automation: Supports fully automated measurements for high throughput rates. Areas of Application The MicroProf® MPR 1250 is used in various industries, including: Semiconductor industry: For the analysis of wafers and microchips. Microsystems technology (MEMS): For the investigation of microstructures. Optics: For the measurement of surfaces in optical components. Automotive industry: For checking component tolerances. Photovoltaics: For the analysis of solar modules. Weight approx. 500 kg Itelswh Swdohcdw Aeh Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.