Germanplast Srl

Condition: excellent (used), Year of construction: 2000, Max. winder speed: 50 m/min Type: Film system 1600 mm usable width Equipment / Additional information: Max. gross output of up to 1300 kg/h A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm Lhjlhowdwl Secdw Hsf two nozzle lips: 0.2 to 1.8 mm & 1.4 to 3 mm Consists of: -Dosing system 5-chamber Maguire -Extruder (130 mm screw) Amut RIDUT.EA120 // Age: 2008 -Screen changer (for cleaning in food production) -Melt pump -Slot die 140 cm (2 inserts) (0.5 - 1.5 mm) (1.5 - 3 mm) -Calender 160 cm / Cooling & smoothing rolls -Post-cooling rolls (2 pcs.) -Winder (Film jam during roll jam) -Film draw-in -Film winders (3 pcs.) -Mill Rapid G200-48KURF // Age: 2014 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Lhslhcjwdilwodw Hsf In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 2008, Condition: refurbished (used), Functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.22 - Year: 2008 - Double parallel screws ø87mm 22D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 200kg/h profile - 300kg/h tubes Very good condition Lhslhcowc Dhdedw Hef

Condition: used, Functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm - Roller width 230 cm - Roller working width 210 cm - Total width 300 cm - Height 250 cm Lholhcdjwcxufow Hjf - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Condition: used, Year of construction: 2004, machine/vehicle number: 023048, Laboratory/table extruder - used machine, ready to use - singlescrew extruder ø19mm x25D - brand: BRABENDER, DE * drive 1,5kW, max. 150Nm * barrel + screw nitrited * 3 barrel heating zones * 3 mould heating zones (without heating element) * temperatures max. 450°C * incl. feed hopper with 3-pos. sliding mechanism * 1 separate base frame, mobile / extruder holder * incl. melt pressure and temperature measurement * cabinet with electrical components and control system Lhelhcdwswcfc Ne Hof Errors in the technical description may be possible, as the extruder is not an IDE product and we can't provide any further information.

Year of construction: 2021, operating hours: 50 h, Condition: excellent (used), Functionality: fully functional, Used PMH filament line Consisting of: used PMH EX30 extruder 30mm /28ld nitrided barrel and hardened screw used PMH Cool 3000 water bath made of stainless steel 3000mm long used AB50 with 2-axis laser measuring system used winder W250 Lhslhcowbva Asdw Hjf with a winding force of max. 5kg. suitable for many common filament spools from 1-5kg. You are welcome for inspection this machine in our warehouse Königswinter

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, Functionality: fully functional, total length: 3,400 mm, total height: 1,750 mm, total width: 1,200 mm, type of input current: three-phase, input voltage: 400 V, Haul-off or automatic belt tractor for extrusion line or other model year 2024. New equipment for sale following modification of our client's project. Technical data: Tractive force: 10,000 N Machine dimensions: L3400 mm x W1200 mm x H1750 mm Profile or tube thickness: min. 16 mm, max. 110 mm Lhjlhcewbgw Sedw Hof Ground-to-chain height: 1000 mm Max. speed: 3 m/min Power: 3 kW 400 V CE-certified equipment Air pressure: 0.4 to 0.7 MPa

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, The offer is only valid until 16.04.2025. Single Screw Extruder, used Manufacturer: Battenfeld Type: Uni-Ex-1-90-30-B Year of construction: 1992 Screw design: grooved infeed zone Screw diameter: 90 mm Screw length: 30 x D Ljlhcdwewaziyo Hehf Screw speed: max. 164 1/min. Drive motor: DC-Motor Motor power: 160 kW Barrel heating/cooling zones: 4/4 (air cooling with fan) Adapter heating zones: 1 Tooling heating zones: approx. 10 Operation: Extruder Battenfeld BMC touch Output rate: max. approx. 500 kg/h for PE100 - pipe Accessories: without material hopper Special accessories: melt temperature- and melt pressure sensors Extrusion height: 1160 mm Dimensions: 5500 x 1500 x 2100 mm (LxWxH) Weight: approx. 5000 kg Remark: The machine was still in production until middle of December 2024. The gear box was refurbished in year 2022.

Year of construction: 1991, operating hours: 32,000 h, Condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws Lslewaxuashcdw Hehf • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Year of construction: 1995, Condition: used, Extrusion line Starex 1000 - without winding! We have no winding available for this machine, customer has to get his own winders. Ljlhcowawpisdw Hjhf Doser - Maguire Machine has been in production from 1996 24/7 until last year. In 2024 it was working perfectly.

Condition: used, Twin screw extruder 34mm diameter Lheljv U Nnuehcdw Hjf 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Hourly output 250-400 kg depending on the product

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Lolhcdwjv U Da Ss Hehf Drive: 10.5 kW Extrusion System Screw Diameter: 2 × Ø27.0 mm L/D Ratio: 40D Design: Co-rotating EQUIPMENT - Segmented screws and barrels - Co-rotating technology - Degassing

Year of construction: 2016, Condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Lhslhcev Uz Awedw Hof

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor Lolhcdwev Uqf Ij Hohf - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Year of construction: 1995, Condition: excellent (used), 1800mm Wide Kuhne Coextrusion Sheet Line. 150mm, 70mm, 45mm Extruders, Edi Die, 1800mm X 500mm Diameter Roll Stack, Haul Off Guillotine 1995 Lhjlhsv Tww Iecdw Hef * 150mm Kuhne 33D vented primary extruder with electrically heated, fan cooled barrel with PS/ABS screw. Main motor 371kw. Screen changer, gear pump static mixer and 3 layer feedblock with replaceable inserts * 70mm Kuhne coextruder 33D vented. Electrically heated fan cooled barrel. Screen changer and gear pump * 45mm Kuhne coextruder with screen changer * 1800mm wide Kuhne model GA5V/1800 calender with 500mm diameter rolls individual servo motors. * Upgraded pressurised 3 zone thermoregulation with heaters, pumps and heat exchangers.

Condition: used, with 175mm Erwepa single screw extruder, gear pump, 2400mm die, 2400mm x 500mm rolls haul off in line knives. * 175mm primary extruder Erwepa Davis Standard 40 D vented with 350kw dc motor and drive. Temperature panel. Hydraulic lantern slide screen changer, Large 90/90 gear pump with gearbox and drive. Gravimetric Maguire 4 zone blender with hopper loaders. * 2400mm wide Reifenhauser 3 roll polishing stack with thermoregulation, haul off. 2400mmx500mm individual drives. Variable speed haul off. In line knives. Large pneumatic roll closing. Lolhcdsv Twnmjw Hjhf * Upgraded pump group - 3 zone

Year of construction: 1998, operating hours: 4,500 h, Condition: ready for operation (used), General Data Measurements width 5000 mm Measurements depth 20000 mm Measurements height 3400 mm Additional Equipment Non-contact thickness measurement for automatic TD profile measurement with double-sided corona treatment (max 12000W) Optical inspection system, including a marking system for detecting faults, incident and transmitted light system Includes components for cooling, screen changing, feed block, slot die, cutting, edge banding, drying, dosing, transferring, and antistatic control. Lhjlhcev Tq Tcedw Hjf This Battenfeld BA 60 film extruder was manufactured in 1998. A reliable choice for your film extrusion needs, it represents a solid addition to any production line. Contact us for more information. Application Types Extrusion

Condition: good (used), Year of construction: 1994, 105 mm screw, l/d: 40 Made for PE granulation Year 1994 With active degassing unit Lholhcdjv S Hr Ejw Hof Including BD-Plast screen changer Water ring granulation

Year of construction: 2006, Condition: ready for operation (used), Additional Equipment Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Lholhsv Sfw Hocdw Hef Extrusion

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, - for extruding rigid, flexible, corrugated profiles - KIWEX China product - 4 heating zones - air cooling Lelhov Rgtgscdw Hjhf - 7.5 kw motor - extruder with adjustable speed - water cooling, 1.25 kw pump - drawing belt with 2 0.5 kw motors - with 2-station winding installation - equipped with linear counter - various technological attachments (creepers for corrugated tubes, various screws)

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, - 10 heating-cooling zones -hydraulic screen changer 2.2 kw - without stopping the machine - 2 screw feeders 65 Lholhcdov N N R Ssw Hsf - magnetic grid separator - vacuum degassing - 90 kw extruder motor with adjustable speed - 2.2 kw material feeding motor - 2.2 kw blower - 2 kw vibrator motor - 4 kw granulator motor -productivity 100 - 130 kg / hour - automatic feeding

Condition: ready for operation (used), An old extruder with L. Pfeiffer motor is available. Motor power: 9kW, motor speed: 1485rpm, rated current: 15.1A. On-site inspection is possible. Lhjlev N Izvehcdw Hef

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, Functionality: fully functional, number of previous owners: 2, Equipment: cooling unit, type plate available, The twin-screw extruder has been used little. New screw shafts and a water cooling system have been overhauled. The control cabinet is present. The calender has a 1.75 mm x 2-hole strand die. Lelev I R Trohcdw Hjhf

Year of construction: 2013, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Ljlhsv Ip S Hjcdw Hehf

Year of construction: 2014, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Lhelhcjv Ip Syjdw Hsf