Used heating & cooling units for sale (149)

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Gbsdspu R Ncepfx Al Sou Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Gsdpfx Aexyt Tbjl Sobu Typ: P140/9/SG51/1K/RT45 Baujahr: 2001 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Gbodpfx Aexyt Tnjl Ssu Typ: P140/9/SG51/1K/RT50 Baujahr: 2004 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Gbedpfx Ajzhpdlel Ssu Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Ready for immediate delivery.

Condition: used, Cooling unit, cooling water recooler, WHALENMEIER, type IK-V 07 Manufacturer's serial number: 219.032.917, year of manufacture: 2018 Gedpozqglxofx Al Sebu Cooling capacity: 900 watts Ambient temperature: max. 32°C Refrigerant: R134a Refrigerant filling quantity: 0.23 kg Operating pressure of refrigeration compressor: max. 20 bar Water tank capacity: 6 liters Flow rate of circulation pump: 9 liters/min. (540 liters/h) Water connections: quick-release coupling, Rectus type 26 Mains connection: 230 volts, 50 Hz, 0.8 kW - Temperature setting via WHALENMEIER temperature control unit - Integrated circulation pump, SPECK, (250 watts) - Base frame made of stainless steel, L x W x H 580 x 400 x 410, weight approx. 20 kg Space requirement, L x W x H: 570 x 440 x 300 mm Weight without base frame: 42 kg In very good condition.

Condition: excellent (used), Year of construction: 2008, Climaveneta cooling unit (Schiller - Water) Year of manufacture: 2008 Type: FOCS/LN 0751 Power: 70.1 kW Gedof S A R Hepfx Al Sobu

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. Gsdpfxjq Nfuze Al Ssbu 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: refrigerant R32 Gedpfx Alof H A Eyj Sjbu Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410-liter tank, winter package for ambient temperatures down to -25°C for outdoor installation, includes speed-controlled fans. Large Dixell display with protective cover.

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Gbjdpfjg Rhx Uox Al Ssu Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Year of construction: 2002, condition: excellent (used), Heating zones Vetter Type: MTC 119 M Year of manufacture: approx. 2002 42 zones Godpjh Hbquefx Al Sjbu

Condition: excellent (used), Year of construction: 2001, MKUK 0100 TAE 015 Year of manufacture: 2001 Capacity: 6 bar Maximum temperature: 35°C Gbedpfx Aogvmrxjl Seu

Condition: used, hot runner control deviceXintech 3 x units 220 Volt price: 1.100 € contact: Mr. Rainer Eckerle Gbsdpfx Aokt U Dxol Seu

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Gsdpog D H Rusfx Al Ssbu Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Year of construction: 2025, condition: new, Chiller with low GWP refrigerant R32. Cooling capacity according to Eurovent: 37 kW. Integrated pump, internal tank, coaxial evaporator, winter package for operation at ambient temperatures down to -25°C, internal bypass. Also available with other cooling capacities. Gbsdpfxemhgg Re Al Sou

Condition: excellent (used), Year of construction: 2000, Refrigeration equipment Brand: Ers Gjdpfed I Tlhjx Al Sebu Type: SC 110. V/5 Power: 8 kW Year of manufacture: 2000

Year of construction: 1994, condition: excellent (used), PSG Type: RSL 98/16 Max. power: 56.4 kW Connection power: 41.5 kW Gbodjd Sym Ropfx Al Sju Year of manufacture: 1994

Condition: good (used), functionality: fully functional, 3 sections Gsdpfjvu Dz Aex Al Ssbu Fully functional!

Condition: refurbished (used), * Machine made in Germany, reelstands from Massenzana. • Single facer 2200mm, profile B, new Friese corrugating rolls. • Brand new Friese steam heads (3pcs). • New condensate valves. • Bridge • Reelstands 2PC – Massenzana • Glue kitchen, 2 tanks 2+3T • Slitter- scorer, longitude • Rewinder, role former ejector Gjdpjkyt Iiefx Al Sebu • Robust cutter (crossway) • Steam generator Zafa, heating oil 8T tanks. • All unconditional bearings, belts etc. has been replaced (brand new). Urgently need to free up the space, best offer wins.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  Gbedjftm Hrepfx Al Ssu max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Gbedpeg Ey Rfjfx Al Sju Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy Gbsdpfxjg Ey Ufs Al Sou -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C Gbjdpsg Ey T Esfx Al Ssu max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A Gsdpfxofnvwqo Al Sebu - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Gedpfx Alofnvvij Sjbu Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.