Used heating & cooling units for sale (148)

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Hsdpfx Abex Eg T Eouew

Condition: used, functionality: fully functional, Workpiece diameter: 1 – 18 mm Cutting discs up to: 100 x 1 mm Hodpfxez Hbcho Abujw Bore: 20 mm

Condition: new, Year of construction: 2020, RegloChill RC2E 30/C – Air-cooled water chiller (Regloplas) Manufacturer: RegloChill / Regloplas Model: RC2E 30/C Serial no.: Year of manufacture: 2020 Made in: Italy Cooling capacity: approx. 28 kW (to be confirmed) Refrigerant: R407C, 6.5 kg Main power supply: 400 V / 3 PE / 50 Hz Rated current: 25 A Short circuit current: 10 kA Auxiliary power supply: 110 V / 24 V Water pressure: 3.5 bar (nominal) Hedpfsz Rvyqox Abuew Design pressure: 18 barg (HP) / 30 barg (LP) PED category: II Set point temperature: -10 °C to +25 °C Max. ambient temperature: +40 °C Tank volume: 200 l Fan capacity: 15,500 m³/h Dimensions (W x H x D): approx. 900 x 1680 x 1500 mm Weight: 475 kg Wiring diagram: SA 095F-00A

Condition: used, functionality: fully functional, The Weinreich temperature control unit is for sale. Medium: Water Operating temperature: max. 95 degrees Celsius Hjdpfoztwpmjx Abusw Heating capacity: 6 kW Cooling capacity: 12 kW Tank: 12 liters

Condition: used, Year of construction: 2021, Engie chiller Capacity: 1.9 MW Hodpfx Aboyan Arsuow Year of manufacture: 2021 Refrigerant: R-1234ze

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hedpfsy Su Efjx Abujw

Condition: used, Year of construction: 2015, Temperature Controller Wittmann TV0000086 (2015) Manufacturer: WITTMANN Model: TEMPRO plus D Type: Temperature Controller Part Number: TV0000086 Year of Manufacture: 2015 Maximum Temperature: 160 °C Number of Circuits: 1 Heating: Electrical Heating Capacity: Approx. 9 kW Pump Type: Magnetically Coupled Circulation Pump Hsdsz D T Idjpfx Abusw Pump Capacity: Up to 30 l/min Maximum Pump Pressure: Approx. 5 bar Control System: Microprocessor Control Temperature Regulation: Automatic / Self-Optimizing Application: Mould Temperature Control for Injection Moulding Marking: TP+D-S-1:160, SO-C, S+OP

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hsdjy Su D Uepfx Abuew

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: I05BN1159, cooling capacity: 55 kW (74.78 HP), The ENR series consists of air-cooled chillers for industrial use, designed for outdoor installation. The ENR 055 features axial fans, scroll compressors, condensers with finned aluminum lamellae, and a self-cleaning coaxial evaporator for maximum operational reliability. It comes with an internal pump, tank, and uses refrigerant R410A. Cooling capacity is 55 kW at 7/12°C and 35°C ambient temperature. The unit is sold with a new leak test certificate. Hjdsw Sv Iyepfx Abusw

Year of construction: 2016, condition: excellent (used), Supply voltage / frequency: 230 V / 50 Hz or 400 V / 50 Hz (also 220/380/460 at 60 Hz) Heating element power: 9 kW (also variants 6 kW, 11 kW, 12 kW in THW9/12 series) Process fluid: water (non-pressurised) Maximum process fluid temperature: 90 °C Cooling fluid: water, utilisation with cooling-water input recommended max ~15 °C inlet, with capacity ~15 l/min. Cooling power: THW9 lists ~21 kW cooling power under specified conditions. Pump (electric): power ~0.75 kW; maximum capacity ~60 l/min; maximum head ~40 m (for THW9/12) Ambient working temperature: 5-40 °C Maximum storage/transport ambient: –25 to +55 °C Hjdpfxszw Ecvs Abusw Sound pressure level: ~72 dB(A)

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function Hodpfx Asx Ek Rdobuew PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater Hjdpfem Dtm Ajx Abujw - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Year of construction: 2022, condition: excellent (used), Nolden hot runner controller (54) 16 channels, soft start, complete with cables + manual, 2022 Hsdpfx Aezcx Anobuow

Year of construction: 2016, condition: excellent (used), Supply voltage / frequency: 230 V / 50 Hz or 400 V / 50 Hz (also 220/380/460 at 60 Hz) Heating element power: 9 kW (also variants 6 kW, 11 kW, 12 kW in THW9/12 series) Process fluid: water (non-pressurised) Maximum process fluid temperature: 90 °C Hjdpfszw Edgjx Abuew Cooling fluid: water, utilisation with cooling-water input recommended max ~15 °C inlet, with capacity ~15 l/min. Cooling power: THW9 lists ~21 kW cooling power under specified conditions. Pump (electric): power ~0.75 kW; maximum capacity ~60 l/min; maximum head ~40 m (for THW9/12) Ambient working temperature: 5-40 °C Maximum storage/transport ambient: –25 to +55 °C Sound pressure level: ~72 dB(A)

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Hedpfx Abozg Nbhjujw Sold with protective cover.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) (EXAMPLE) This state-of-the-art 4-pipe heat pump was specifically designed for the flexible, simultaneous, or independent provision of both chilled and hot water. Thanks to the latest inverter technology and the environmentally friendly refrigerant R290, the system offers maximum energy efficiency with a minimal environmental footprint. The unit features robust cladding panels and integrated sound insulation for the compressor compartment, ensuring extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the system is ready for immediate operation and can be seamlessly integrated into complex building systems. Hjdez Nvkaopfx Abuew Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Credit brokerage and advice are provided by KREDIT DE AG. Representative example according to § 17 PAngV: Basis for calculating the stated rate (assuming creditworthiness): Net loan amount €35,000.00, 7.10% fixed interest rate, 7.20% per annum effective annual interest rate, 96 months term, total amount €45,976.68, monthly installment €478.92.

Condition: used, Year of construction: 2001, machine/vehicle number: 14947/01, Temperature control unit from manufacturer Robamat, used and untested. The unit is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a multi-circuit system with Thermocast 4212 control system. The medium used is oil*, with a maximum supply temperature of 320 °C. Heating capacity is 34 kW*, pump capacity is 75 l/min at 5.0 bar*. Year of manufacture: 2001, total weight: 350 kg. Hjdpfxjy Sukue Abujw

Condition: new, New 64-zone hot runner controller. Used for only 2 hours to sample a mold. From a cleanroom production line for pipette tips. Equipped with Harting connectors for sensors and temperature. Plug in and ready to run. Hodpfoxk Txfjx Abuew

Condition: used, F&P Electronic Temp-star TS.Mulit 5 A hot runner controller, used in plastic injection molding for the precise temperature control of hot runners/channels within molds. Overview of your module: Manufacturer: F&P Electronic GmbH (Waldkirch, Hodpfx Ae Abx Hgsbuow Germany) Series: Temp-Star (abbreviated as TS.MULTI 5) Function: Multi-channel temperature control (typically 5 zones/channels, as indicated by the designation "MULTI 5") for injection molds.

Condition: used, Year of construction: 2009, Manufacturer / Brand: HB-THERM Model / Type: HB-160Z1 (Serial number: 909-9512) Hjdpfx Asz D T Ttsbuew Year of manufacture: 2009 Heat transfer medium: Pressurized water (closed circuit) Maximum temperature: 160 °C Maximum system pressure: 20 bar Internal fluid volume: 1.5 L Heating capacity: 8.0 kW Pump capacity: 1.0 kW (max. flow rate 60 L/min, max. discharge head 60 m) Cooling capacity: 30 kW (at 60 K temperature difference) Supply voltage: 380–420 V (3~, 50–60 Hz) Nominal ratings: 400 V, 50 Hz | 14 A | Total power consumption 9.1 kW Cooling water inlet pressure: 2 to 5 bar Additional equipment: DFM 8 flow measurement module (HB-FM160-20), 4-zone manifold (circuits 1, 9, 8, 7)

Year of construction: 2016, condition: excellent (used), Supply voltage / frequency: 230 V / 50 Hz or 400 V / 50 Hz (also 220/380/460 at 60 Hz) Heating element power: 9 kW (also variants 6 kW, 11 kW, 12 kW in THW9/12 series) Process fluid: water (non-pressurised) Maximum process fluid temperature: 90 °C Cooling fluid: water, utilisation with cooling-water input recommended max ~15 °C inlet, with capacity ~15 l/min. Cooling power: THW9 lists ~21 kW cooling power under specified conditions. Pump (electric): power ~0.75 kW; maximum capacity ~60 l/min; maximum head ~40 m (for THW9/12) Ambient working temperature: 5-40 °C Maximum storage/transport ambient: –25 to +55 °C Hjdpezw Ec Aefx Abusw Sound pressure level: ~72 dB(A)

Year of construction: 2016, condition: excellent (used), Supply voltage / frequency: 230 V / 50 Hz or 400 V / 50 Hz (also 220/380/460 at 60 Hz) Heating element power: 9 kW (also variants 6 kW, 11 kW, 12 kW in THW9/12 series) Process fluid: water (non-pressurised) Maximum process fluid temperature: 90 °C Cooling fluid: water, utilisation with cooling-water input recommended max ~15 °C inlet, with capacity ~15 l/min. Cooling power: THW9 lists ~21 kW cooling power under specified conditions. Hjdjzw Ec Nepfx Abuew Pump (electric): power ~0.75 kW; maximum capacity ~60 l/min; maximum head ~40 m (for THW9/12) Ambient working temperature: 5-40 °C Maximum storage/transport ambient: –25 to +55 °C Sound pressure level: ~72 dB(A)

Year of construction: 2011, condition: excellent (used), PIOVAN THW112-F (2011) Hjdpfeztni Dsx Abuew Model: THW112-F Rok výroby: 2011 Napätie (V): 400 V Frekvencia (Hz):50 Hz Celkový príkon (kW): 13,6 kW (zahŕňa vykurovacie telesá aj motor čerpadla) Hmotnosť (kg): 120kg

Condition: ready for operation (used), Year of construction: 2002, Heating devices Autotherm Type: AW 95-3 Year: 2002 Oil heating devices Hedpowuvlljfx Abusw

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Hedpfx Abey Surfousw