Used heating & cooling units for sale (158)

Year of construction: 2019, condition: like new (used), functionality: fully functional, The equipment originates from toolmaking, thus has seen very little use. The ENGEL machine has only 6,520 operating hours. The temperature control units have also only been used within this context and have a maximum of approximately 7,500 operating hours. Gsdjxk Txxopfx Adbjip Price: €3,850 per unit. 2 units remain available out of the original 15.

Condition: used, Hotrunner-Steuerung Feller MCS 04 4, 4 Stück, 230 Volt year: Gedexwcdwepfx Adboip price: 1.250 Euro contact: Mr. Rainer Eckerle

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 Giedpfefnvvijx Adbep - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: R32 refrigerant Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410 l tank, winter package down to -25°C ambient temperature for outdoor installation, includes variable-speed fans Gsdef H A Eyepfx Adbsip Large Dixell display with protective cover

Year of construction: 2023, condition: new, Chiller with refrigerant R454B < 500GWP. Cooling capacity according to Eurovent 34kW. Giedpfomhgg Rsx Adbsp Internal pump, Internal tank , Coaxial evaporator , Winter package up to ambient temperature of -25°C, Internal bypass. Delivery time approx. 6 weeks Also available with other cooling capacities.

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: Gsdpfxsu Au I Tj Adboip 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Year of construction: 2020, condition: excellent (used), Chiller SBS 330 built in 2020 for sale from our rental park. System receives new maintenance and leak test on takeover. Cooling capacity at 7/12°C and 35°C ambient temperature 320kW. The chiller has compressor sound insulation enclosures, winter package, low pressure and high pressure gauges, low water version, electronic expansion valves, X-Web, flange connections, Godpfxji Ab N Hj Adbjip

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: I05BN1159, cooling capacity: 55 kW (74.78 HP), The ENR series consists of air-cooled chillers for industrial use, designed for outdoor installation. The ENR 055 features axial fans, scroll compressors, condensers with finned aluminum lamellae, and a self-cleaning coaxial evaporator for maximum operational reliability. It comes with an internal pump, tank, and uses refrigerant R410A. Cooling capacity is 55 kW at 7/12°C and 35°C ambient temperature. The unit is sold with a new leak test certificate. Giodpfx Adsw Sv Iyobop

Year of construction: 2025, condition: as good as new (ex-display), ENR 008 – Air-cooled Chiller Cooling capacity: 7.9 kW at supply/return temperatures of 7/12°C and an ambient temperature of 35°C Compact design with coaxial evaporator for efficient heat transfer Gedpfx Aefy Rykodbeip Internal P3 pump for reliable circulation of cooling water Buffer tank with 50 l water volume for short-term load balancing Speed-controlled fans for demand-based cooling and reduced energy consumption Control: compatible with common control systems, ideal for easy integration Suitable for smaller cooling applications, such as the plastics industry

Condition: used, hot runner control device Xintech 16 fach 220 Volt price: 3.450 € Giodpfx Adowgb Icjbjp contact: Mr. Rainer Eckerle

Condition: used, hot runner control device Xintech 12 fach 220 Volt Gijdpfx Aekt U Duodbjp price: 2.850 € contact: Mr. Rainer Eckerle

Condition: used, hot runner control device Vetter MC 712 L-P 12 fach 220 Volt price: 2.850 € contact: Mr. Rainer Eckerle Gisdpfxekt Uzks Adbop

Condition: used, Hotrunner controlunit PSG 8 8 units 230 Volt price: 2.250 € contact: Mr. Rainer Eckerle Gsdpfewgb Ngsx Adbjip

Condition: new, *TECHNICAL SPECIFICATION: Gsdpsg Ey T Eofx Adbjip Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW Giodpfxog Ey Ufo Adbop cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate Gisdpfx Adjg Ey Rfjbep -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Giedpfx Adjftm Hrebop Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C Giodpsfnvwqofx Adbop *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2023, condition: like new (used), Wittmann TP-PLUS-D-2:M160 (2023) Model: Wittmann Tempro TP-PLUS-D-2:M160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (option 12–16 kW) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized) Cooling: Plate heat exchanger, cooling water connection G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 completely independent circuits Standard features: Automatic filling, pressure monitoring, leak-free pump, SSR heating, pump rotation control, mold purge Giedpfx Adsxykn Nobop Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 100–120 kg

Year of construction: 2016, condition: excellent (used), Supply voltage / frequency: 230 V / 50 Hz or 400 V / 50 Hz (also 220/380/460 at 60 Hz) Heating element power: 9 kW (also variants 6 kW, 11 kW, 12 kW in THW9/12 series) Process fluid: water (non-pressurised) Maximum process fluid temperature: 90 °C Cooling fluid: water, utilisation with cooling-water input recommended max ~15 °C inlet, with capacity ~15 l/min. Cooling power: THW9 lists ~21 kW cooling power under specified conditions. Pump (electric): power ~0.75 kW; maximum capacity ~60 l/min; maximum head ~40 m (for THW9/12) Ambient working temperature: 5-40 °C Gisdpfsxykc Tex Adbjp Maximum storage/transport ambient: –25 to +55 °C Sound pressure level: ~72 dB(A)

Year of construction: 2026, condition: new, We are manufacturer of temperature control unit (Thermoregulator), so we are able to produce every capacity devices you need. Technical data: Brand: Churchill ISI-TAN Model: CH220x2 Heating Capacity: 20kW (with oil) Gsdpshby Irefx Adbeip Operation Range: 300C (oil) Pump: 90x2 l/min,8bar, 1,5kW (German brand) Power Consumption: 21,5 kW Voltage: 400/50Hz, 3phases Delivery cost is not included

Condition: new, Year of construction: 2026, Direkt vom Hersteller verkauft, sehr gute qualität, alle komponente aus Europa, Kühlgerät Chiller, Kaltwassersatz Water Cooling Technische Daten: Marke: Churchill ISI-TAN Model: CC110 Külhleistung:100.792kcal, 117,20 kW Gsdpfx Adjgnlltoboip Leistung COP: 5,79 Kompressorleistung: 2x8,38 kW (Danfoss) Ventilator: 6x500 each/mm (Ziehl-Abegg) Refrigerant: R407C / R134a Voltage: 400/50Hz, 3phases Dimensionen: 1500x2650x2050mm, 1155kg VAT and delivery cost is not included

Condition: excellent (used), Voltage 3 x 230 / 400, 45 A 6 sections Giodou Hlr Rjpfx Adbep The appliance has been tested and is fully functional!

Condition: excellent (used), functionality: fully functional, Manufacturer: Günther Godpfx Ajwqgxhsdbsip Type: DP15/10 10 sections With cable

Condition: good (used), functionality: fully functional, Power: 6370 watts Gjdpfev R Edwjx Adbsip Maximum operating temperature: 95°C Medium: water Two units available! Price per piece! Price for two temperature control units: 900 EUR!!!