Used high-pressure cleaners for sale (161)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter Iedpfx Anedqkrws Netk - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Year of construction: 2010, condition: as good as new (ex-display), Woma 1002 P35 Itjdpfxsf Dybzj An Nek High Pressure Pump in New Condition 300 bar - 84 ltr/min - 1500 rpm 300 bar - 101 ltr/min - 1800 rpm

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 56 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 1020 B NEW LIFAN 190 F (15KM) COMBUSTION ENGINE The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient Lifan 190 F combustion engine ensures stable operation even with long-term use Thanks to the operating parameters of 200bar and 800l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: Combustion Engine: LIFAN 190 F 15 HP Pressing capacity [l/h]: 800 Working pressure [bar]: 200 Maximum pressure [bar]: 250 Weight [kg]: 56 Dimensions (length x width x height) (mm): 1044 x 582 x 668 Hose length [m]: 10 Itsdpfx Aswwhinon Nok EQUIPMENT: NEW LIFAN 190 F (15HP) COMBUSTION ENGINE NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle GEKa water filter and claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple design and good access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Iedsxykwwepfx An Netk Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: new, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TECHNICAL DATA: Model: KRANZLE THERM 1165-1 Manufacturer: KRANZLE Country of manufacture: Germany Ijdpfx Anoy Sgdyo Nstk Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 WASHER EQUIPMENT KRANZLE Starlet [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat stream power nozzle [D2507]. A flat high-pressure jet with high surface coverage and excellent dirt removal. 10m Professional-class, double-braided steel pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1? The THERM 1165-1 is ideal for factories, workshops, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 model suitable for use in a wide range of industries. Additional handles allow for easy transport of the unit along with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The 1165-1 model is equipped with a digital thermostat, flow sensor, overheating protection, and an operating hour meter. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded attachments. The device is completely new.

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Iedpjxtc Rcsfx An Notk Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Condition: new, operating pressure: 180 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 150 °C, KRANZLE THERM C 13/180 TECHNICAL DATA: Model: KRANZLE THERM C 13/180 Manufacturer: KRANZLE Catalog number: 626200 Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 780 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 150 Operating pressure (bar): 180 Maximum pressure (bar): 200 Connected power (kW): 4.8 / 4.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM C 13/180 WASHER EQUIPMENT KRANZLE M2000 pressure gun (M22 / quick coupler) [12492] Spray lance: KRANZLE (quick coupler) [12420] 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. [D25045] 10m Professional-Class Pressure Hose [44878] WHY CHOOSE THE KRANZLE THERM C 13/180? The THERM C 13/180 model is ideal for factories, workplaces, and industrial halls. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the C 13/180 model suitable for use in a wide range of industries. Additional handles allow for easy transport of the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM C 13/180 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. Isdpfx Anjy Sgkyj Nstk The device is completely new.

Condition: new, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 11/130 EQUIPMENT KRANZLE pressure gun (M22 / quick connector) KRANZLE spray lance (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose KRANZLE external water filter WHY CHOOSE THE KRANZLE THERM CA 11/130? The THERM CA 11/130 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A key advantage of this model is its power supply via a single-phase 230V socket, which translates into excellent mobility in terms of power supply points. The THERM line places a primary emphasis on smooth operation and continuous operation, making the CA 11/130 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. Itsdpfx Ajy Sg Swon Njk It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. A high-pressure gun with lance, 10m high-pressure hose, and a Power nozzle are standard. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. Single-phase power supply (230V) The device is brand new.

Condition: like new (used), Woma 150Z P16 2000 bar at 20 ltr/min at 1800 rpm Itsdpfsd Hny Aox An Nek

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz Itedpfxjhf Na So An Nek CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- Isdpfx Aohf Na Ijn Netk CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 Itodpfxow Icn So An Njk PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Iodpfx Anjwmln Tj Nstk Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Iodpjztwg Sjfx An Netk Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. Iodpfoztwh Aox An Nstk The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% Itodsztwkdopfx An Nek High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower XL E, similar but not a Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Flow rate: 13-38 l/min - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 rpm or IE3 electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 rpm - Dimensions: 1,450 x 900 x 1,050 mm - Dry weight: approx. 450 and 550 kg - High-pressure pump: HPP three-piston pump with ceramic pistons - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter and 10 m power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat spray nozzle 15° Iodpfjfdzxisx An Notk The following models are available: Easy Power XL E 38/400 | 38 l/min, 400 bar | 30 kW | 560 kg Easy Power XL E 30/500 | 30 l/min, 500 bar | 30 kW | 560 kg Easy Power XL E 20/800 | 20 l/min, 800 bar | 30 kW | 580 kg Easy Power XL E 15/1000 | 15 l/min, 1000 bar | 30 kW | 580 kg Easy Power XXL E 19/1000 | 19 l/min, 1000 bar | 37 kW | 580 kg Easy Power XXL E 15/1250 | 15 l/min, 1250 bar | 37 kW | 580 kg Easy Power XXL E 13/1500 | 13 l/min, 1500 bar | 37 kW | 580 kg

Year of construction: 2022, condition: as good as new (ex-display), High-pressure cleaner PTC Easypower XL D, similar to but not a Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, or Denjet. - Operating pressure: 400-1500 bar - Flow rate: 13-47 l/min - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel engine, 53 hp/39.5 kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 mm - Dry weight: approx. 740/760 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection Itodpfx Anedg Itts Njk - Covers made of stainless steel - Holder for gun with lance - Available as a skid with anti-vibration feet or as a trolley with industrial wheels - Includes 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance, and flat jet nozzle The following models are available: Easy Power XL D 47/400 | 47 l/min, 400 bar Easy Power XL D 38/500 | 38 l/min, 500 bar Easy Power XL D 30/600 | 30 l/min, 600 bar Easy Power XL D 19/1000 | 19 l/min, 1000 bar Easy Power XL D 17/1100 | 17 l/min, 1100 bar Easy Power XL D 15/1250 | 15 l/min, 1250 bar Easy Power XL D 13/1500 | 13 l/min, 1500 bar

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 607 mm, high-pressure hose length: 10,000 mm, total height: 1,063 mm, total width: 518 mm, type of input current: three-phase, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, Technical Specification Voltage: 3 / 376–424 V / 50 Hz Working Pressure: 80–250 bar Flow Rate: 500–1000 l/h Inlet Water Temperature: 60°C Connected Load: 8.8 kW Nozzle Size: 047 Colour: Anthracite Weight with Accessories: 70.3 kg Weight with Packaging: 78.55 kg Dimensions (L x W x H): 607 x 518 x 1063 mm The compact, vertical design is made possible by the vertically mounted motor and pump. Compact dimensions facilitate storage. Manoeuvrable and easy to transport. Stable during operation. 4-pole, low-speed motor cooled by water and air; reliable stainless steel piston pump and brass cylinder head Long service life and economical maintenance. High performance and efficiency. Water suction function for water temperatures up to 60°C. Ergonomic Vibrasoft rotary nozzle Reduces vibrations by up to 30%. Reduces noise level and intensity. Rotary nozzle provides support for demanding cleaning tasks. Smart service design speeds up on-site maintenance Rotatable pump head. Convenient oil level indicator and integrated oil drain in the device housing. Modular design comprising pump, motor, and control cabinet. Support systems and LED display Itodpfx Anow Iduto Nok Integrated electronic control system. Automatic shut-off in case of network overload. Automatic shut-off in case of phase loss or leakage from the device. Comprehensive range of accessories with EASY!Lock technology Pressure and water volume can be adjusted via the Servo Control regulator located between the lance and the trigger gun. The EASY!Force Advanced trigger gun allows effortless operation. Rotary lance made of stainless steel, 1050 mm in length. Wide range of additional accessories Storage compartment. Adjustable hooks, e.g. for storing a second lance or power cable. High-pressure hose storage compartment.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Itsdpjw Ickasfx An Nek Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 44 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HD 6/15 G CLASSIC WASHER: Model: HD 6/15 G Classic Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (factory packed) Thread Type: KARCHER M22 Series Isdpfov Txawjx An Netk Power Supply (Exhaust): Petrol Pumping Capacity (l/h): 600 Working Pressure (bar/MPa): 150 / 15 Maximum Pressure (bar/MPa): 200 / 20 Mobility: Ultra Pump Type: CRANK ROD (brass) Weight (kg): 43.6 Dimensions (L x W x H) (mm): 878 x 538 x 702 EQUIPMENT OF THE KARCHER HD WASHER 6/15 G CLASSIC: Pressure gun: Karcher Classic 300 BAR - M22 High pressure hose: Karcher Classic 10M, DN6, M22-M22 Spray lance: Karcher 600mm Classic Nozzle [1]: Power nozzle with a 25° flat stream. Flat high-pressure stream with high surface efficiency and good dirt loosening force RELIABLE | DURABLE | ERGONOMIC Independence from external power sources. Compliant with the requirements of the EU STAGE V exhaust emission standard. Convenient, manual start. Puncture-proof wheels. The compact and small device is very easy to maneuver in limited areas. Fits in a car. Additional handles allow the device to be transported with additional equipment. Brass pump head that affects the extension of the device's service life. Solid tubular construction protects the pump from damage. Safety valve on the high-pressure pump and water filter. Crank pump with ceramic pistons The device is completely new and factory-packed in a cardboard box.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. Itodpfx Aofh Skaon Nok The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, Pressure Washer Condition: New Itsdexmb Sfopfx An Nok Technical Condition: New Description: New

Condition: new, operating pressure: 130 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 69 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 5/13 U ANNIVERSARY EDITION WASHER: Model: HDS 5/13 U ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster packed in factory) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 500 Working pressure (bar/MPa): 125 / 12.5 Maximum pressure (bar/MPa): 150 / 15 Maximum temperature (°C): 80 Fuel consumption (kg/h): 3.1 Connection power (kW): 2.6 Power cable (m): 5 Weight with packaging (kg): 69 Dimensions (L x W x H) (mm): 618 × 618 × 994 EQUIPMENT OF THE KARCHER HDS 5/13 U ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce High pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock Spray lance: Karcher Professional 840 mm !EasyLock Nozzle: Karcher Professional three-stage nozzle (0°/25°/40°) !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Due to its small size, the device can work wherever it is difficult to reach, or where it is often necessary to work in different places. Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. EASY!Force technology reduces the force needed to hold the gun trigger to zero. KARCHER 90th anniversary version! Automatic pressure reduction after switching off the device The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed. Isdev Tw Sfopfx An Notk

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 878 mm, high-pressure hose length: 10,000 mm, total height: 702 mm, total width: 538 mm, empty load weight: 57 kg, fuel: super 95, warranty duration: 24 months, We offer for sale the HD 9/25 G Classic petrol-powered high-pressure washer. Condition: New Year of manufacture: 2024 Technical specifications: - Pump performance (l/h): 900 - Working pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: petrol - Engine type: G390FA - High mobility - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: - Standard spray gun - 10 m high-pressure hose - Crankshaft pump with ceramic pistons - Power nozzle - Protection frame - Water filter Features: Independence - No reliance on external power sources. - Compliant with EU STAGE V emission standards. Iedpfx Aex At R Ejn Netk - Convenient manual start. High mobility - Puncture-proof wheels. - Compact and easy to manoeuvre in confined areas. - Fits inside a vehicle. Robust and durable design - Sturdy tubular frame protects the pump from damage. - High-pressure pump equipped with a safety valve and water filter. - Crankshaft pump with ceramic pistons. Accessory storage - Holder for power leads and accessory compartment for easy storage and transport. - Ergonomic handle and convenient hose storage. The HD 9/25 G Classic cold-water high-pressure cleaner, with a working pressure of up to 250 bar, a delivery rate of 900 litres per hour, and a durable crankshaft pump, is designed to handle even the most demanding cleaning tasks. Its high-performance EU STAGE V petrol engine eliminates the need for external power sources. Sturdy tubular steel frame and puncture-proof tyres make it ideal for challenging tasks on construction sites, in industry, municipal areas, or service companies in the construction sector. The ergonomic handle, very compact dimensions, and dedicated accessory holders (e.g., for high-pressure hose and lance) simplify operation and allow for easy transport by vehicle. All major components are easily accessible for servicing and are effectively protected by thermal and safety valves. Please note: The machine does not support suction from alternative water sources.