Condition: used, tank capacity: 900 l, GENERAL INFORMATION Equipment: Disc valve Design: upright Remarks: Height-adjustable knuckle screws on the feet are partially missing (must be retrofitted on site for installation; otherwise, the outlet would be lower than the feet); Inner tank surfaces partially show metallic discoloration; 2 tanks have a dent at the junction of the cylinder and top head (see photos). Cgsdpfx Aasyckxujaor Inner diameter: 890 mm Total height: 2,100 mm Location: Bremen Volume: 900 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,460 mm Last intended use: Brewery TANK Support type: Height-adjustable feet Number of feet: 3 units EQUIPMENT Outlet: 35 mm MATERIAL PROPERTIES Material of feet: Stainless steel

Condition: used, tank capacity: 360 l, GENERAL Csdeyckyrjpfx Aaajgr Equipment: Ball valve Design: upright Remarks: Support frames made of V2A (partially slightly bent); most of the lid fastenings are no longer present; some outlets are bent upwards; one tank is fitted with an internal level indicator (see photos) Internal diameter: 630 mm Total height: 1,300 mm Top: bolted lid Location: Bremen Volume: 360 liters Cylinder wall thickness: 1.3 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,200 mm Last area of application: pharmaceuticals TANK Bottom: dished bottom Base type: support frame EQUIPMENT Outlet: DN25 DIN 11851 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 1.6 mm Top wall thickness: 1.3 mm

Condition: used, tank capacity: 565 l, GENERAL Equipment: Ventilation/air outlet, ball valve Design: Container Remarks: Frame, Fe (galvanized); External diameter: 1,080 mm Internal diameter: 1,077 mm Total width: 1,121 mm Total height: 1,041 mm Total length: 1,121 mm Cgjdeyck Agspfx Aaaer Heating/Cooling: present Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 565 liters Cylinder wall thickness: 1.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: unused Cylindrical height: 500 mm TANK Base design: Frame HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: in the top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Feet material: steel

Condition: used, tank capacity: 5,500 l, GENERAL Design: vertical Remarks: Partial areas of the cylinder exterior are marbled Inner diameter: 1,620 mm Total height: 3,200 mm Location: Bremen Volume: 5,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Last usage: food industry VESSEL Support type: legs Number of legs: 3 pcs Cgodpfx Asyck Ebeaaer EQUIPMENT Manhole / dome: in the cylinder (approx. 340 x 440 mm) Outlet: DN32 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Leg material: stainless steel

Condition: used, tank capacity: 2,130 l, GENERAL INFORMATION Equipment: Level indicator (without guarantee) Design: oval Remarks: 2 loose concrete saddles; 1 manway approx. 340 x 440 mm in the front end; manway gasket missing; Internal length: approx. 2,160 mm; Internal width: approx. 705 mm; Internal height: approx. 1,490 mm; Total width: 710 mm Total height: 1,730 mm Total length: 2,300 mm Location: Bremen Volume: 2,130 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last product stored: fruit juice TANK Mounting style: Saddles EQUIPMENT Outlet: 35 mm Cgedpeyck Ezefx Aaaer Note: minor residue present

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Remarks: Internal dimensions approx. 1,000 x 1,000 mm; internal height approx. 190 mm (slight slope towards outlet); small dents in the bottom (see photos) Cedpfx Aasyck I Asaogr Total width: 1,400 mm Total height: 250 mm Total length: 1,380 mm Top: open Location: Bremen Volume: 200 litres Product contact material: V2A 1.4301 (AISI304) Condition: used EQUIPMENT Outlet: DN50 DIN 11851

Condition: used, tank capacity: 16,000 l, GENERAL Equipment: ball valve, crane lugs Design: vertical Remarks: Full pipe coil inside the tank (lower cylinder area) present External diameter: 2,530 mm Cgedpfxexqdk Es Aaasr Total height: 4,200 mm Heating/cooling: available Support type: feet Location: outdoor storage Volume: 16,000 liters Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,020 mm TANK Number of feet: 4 EQUIPMENT Manhole / dome: in cylinder, in top head (DN 500) Outlet: available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top head wall thickness: 2 mm

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: aeration/venting, spray head, crane lugs Cjdpfx Aasxqdmaeaegr Design: vertical Internal diameter: 2,980 mm Total height: 7,700 mm Insulation: yes Power: 1.5 kW Agitator: propeller Support design: height-adjustable feet Location: outdoor storage Volume: 30,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 4,300 mm TANK Bottom: conical bottom INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on the top cover Outlet: DN50 flange TECHNICAL DATA / DIMENSIONS Ground clearance: 1,900 mm AGITATOR 1 Voltage: 380 V Agitator arrangement: eccentric, on the top cover

Condition: used, tank capacity: 180 l, GENERAL Equipment: Butterfly valve Design: Vertical Notes: Handhole diameter 200 mm Speed: 945 rpm Internal diameter: 640 mm Total height: 1,880 mm Power: 2.2 kW Agitator: Propeller Stand type: Feet Location: Bremen Volume: 180 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used TANK Codpexqdt Tjfx Aaaogr Number of feet: 4 pcs EQUIPMENT Manhole / Dome: Handhole Outlet: DN40 DIN 11851 Remark: Light adhesions MATERIAL SPECIFICATIONS Material of feet: Stainless steel AGITATOR Voltage: 220/380 V Agitator arrangement: Eccentric in the upper head

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Rectangular opening approx. 1000 x 1000 mm in the top cover; minor internal and external corrosion Outer diameter: 3,000 mm Inner diameter: 2,890 mm Total height: 3,350 mm Insulation: available Agitator: propeller Location: Bremen Nameplate: Volume: 15,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,240 mm Last application: laboratory production TANK Mounting type: height-adjustable feet Number of feet: 6 units Cedoyclvbjpfx Aaaogr INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of feet: stainless steel AGITATOR Agitator location: eccentric in the top cover

Condition: used, Year of construction: 2004, tank capacity: 6,500 l, GENERAL Equipment: Spray head, lifting lugs Design: upright Year of manufacture: 2004 Remarks: Cone height approx. 1300 mm; manway approx. 415 x 500 mm; 1 rectangular opening approx. 350 x 440 mm without cover at the top; one tank has a small crack in the cone bottom at the agitator connection (this tank also shows dents in the cylinder in the area of the hinged segment); on another tank, the agitator flange of the lower propeller agitator appears to be damaged (see photos) Internal diameter: 1,600 mm Overall height: 5,550 mm Top head: welded cover with hinged segment Agitator: propeller Agitator type: propeller Location: Bremen Name plate: Volume: 6,500 liters Cgsdpfxjyclvue Aaaer Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,960 mm Previous application: Laboratory production TANK Max. allowable operating temperature: 90 °C Bottom: conical bottom Support design: height-adjustable feet Number of feet: 4 pcs FEATURES Manway / access port: on cylinder Outlet: 80 mm Note: minor residues MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Baffles: Agitator arrangement: central, on top Agitator features: agitator data not legible on this unit; agitator motors show signs of corrosion; one agitator in the cone missing name plate SECOND AGITATOR Agitator arrangement: bottom Speed: 1450 rpm Voltage: 400/690 Volt Power: 5.5 kW

Condition: used, tank capacity: 500 l, GENERAL Design: upright Remarks: Upon request, 5 more identical tanks are available Internal diameter: 750 mm Total height: 1,610 mm Standing design: feet Location: outdoor storage Technical documentation: drawing Volume: 500 liters Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Cgjdpfxjx Dlvpe Aaajr Condition: unused Cylindrical height: 990 mm TANK Bottom: conical bottom Number of feet: 3 pcs EQUIPMENT Outlet: available TECHNICAL DATA / DIMENSIONS Wall thickness (bottom): 2.5 mm Wall thickness (top): 2.5 mm

Condition: used, tank capacity: 261 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Handhole diameter approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; should be considered when installing the vessel) Speed: 920 rpm Internal diameter: 600 mm Cgjdpfex Dlv Njx Aaaer Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 1,880 mm Power: 0.65 kW Top cover: Removable / hinged top cover Agitator: Propeller Support type: Feet Location: Bremen Nameplate: Volume: 261 liters Product contact material: V4A 1.4571 (AISI 316) Condition: Used Cylindrical height: 790 mm Last application: Chemicals VESSEL Number of feet: 4 pcs. EQUIPMENT Manway / Inspection port: Handhole Outlet: Available Note: Light residues MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 V Agitator mounting: Eccentrically mounted in top cover

Condition: used, tank capacity: 6,150 l, GENERAL Equipment: Crane lugs Design: Standing Location: External storage Nameplate: Volume: 6,150 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cgodsycizzopfx Aaaer Last application: Clean water TANK Support type: Height-adjustable feet Number of feet: 3 pcs EQUIPMENT Manhole / Dome: In the cylinder Outlet: Available

Condition: used, tank capacity: 6,700 l, GENERAL Cgedjxqda Hjpfx Aaaer Design: upright Remarks: Residues from previous product present inside (tanks originate from the coffee industry); External diameter: 1,850 mm Total height: 3,700 mm Agitator: propeller Support type: feet Location: outside storage Volume: 6,700 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,540 mm Previous use: coffee industry TANK Number of feet: 4 pcs EQUIPMENT Manhole / dome: on top (DN 500) Outlet: DN50 DIN 11851 MATERIAL PROPERTIES Feet material: stainless steel AGITATOR 1 Agitator position: eccentric in top head

Condition: used, tank capacity: 1,250 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanised; slightly bent in some areas); 1 container with discharge DN 80 DIN 11851; manhole cover fittings incomplete; container with dents Total width: 1,230 mm Total height: 2,050 mm Total length: 1,030 mm Cgsdpfxoxqdcns Aaaer Base type: Frame Location: Bremen Nameplate: Volume: 1,250 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Cosmetics TANK Bottom: Conical bottom EQUIPMENT Manway / Dome: in the top head (DN 400) Outlet: DN65 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: Frame (hot-dip galvanized); the top of this container is slightly dented, it has minor dings on the walls and one bolt on the manhole cover is missing Overall width: 1,230 mm Overall height: 1,980 mm Overall length: 1,030 mm Mounting type: Frame Location: Bremen Nameplate: Volume: 1,100 liters Product-contact material: V2A 1.4301 (AISI 304) Cjdsxqdcuepfx Aaaogr Condition: Used Previous application: Cosmetics TANK Bottom: Conical bottom FEATURES Manhole/Dome: On top (DN 400) Outlet: DN65 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanised); Top plates of the container slightly dented (see photos); Bolts for the manhole covers are mostly missing Total width: 1,230 mm Cgodpfoxqdczsx Aaaer Total height: 2,000 mm Total length: 1,030 mm Base type: Frame Location: Bremen Volume: 1,100 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Last application: cosmetics TANK Bottom: conical bottom EQUIPMENT Manhole / dome: in the top plate (DN 400) Outlet: DN80 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 1,200 l, GENERAL Features: Butterfly valve Design: Container Remarks: 4-legged frame made of V2A; cone height approx. 650 mm; manway diameter approx. 410 mm (some fastening bolts are incomplete); 7 containers with stacking ring on the top cover; hand levers of the butterfly valves are partly slightly bent or incomplete; some containers have more significant dents. Internal diameter: 1,190 mm Total height: 2,200 mm Type of stand: Frame Location: Bremen Volume: 1,200 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 740 mm Previous application: Cosmetics TANK Bottom: Conical bottom Number of legs: 4 EQUIPMENT Manway/hatch: in top cover Cgsdpfxjxqdc Uj Aaasr Outlet: DN65 DIN 11851 Note: Signs of use MATERIAL SPECIFICATIONS Leg material: Stainless steel

Condition: used, Year of construction: 2017, tank capacity: 11,630 l, GENERAL Equipment: crane lugs Design: vertical Year of manufacture: 2017 Internal diameter: 2,000 mm Total height: 5,000 mm Insulation: present Base type: feet Location: external storage Nameplate: Volume: 11,630 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 3,000 mm Last application: food industry TANK Max. permissible operating temperature: 100 °C Ends: Klöpper head Number of feet: 4 pcs Cgjdpexqdf Ajfx Aaaer INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: flange DN65

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Lifting lugs Design: Vertical Outside diameter: 3,100 mm Overall height: 4,250 mm Base: Adjustable feet Location: Outdoor storage Nameplate: Volume: 15,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 2,000 mm TANK Bottom: Conical bottom Number of feet: 3 pcs EQUIPMENT Manway / Dome: In the cylinder Outlet: Pipe end, approx. Ø 80 mm Cgedpfx Ajxqdkloaajr TECHNICAL DATA / DIMENSIONS Ground clearance: 1000 mm

Condition: used, tank capacity: 170 l, GENERAL INFORMATION Design: upright Remarks: Tank slightly out-of-round Internal diameter: 780 mm Overall height: 830 mm Top: open Support style: height-adjustable feet Cgodpjxqdtmofx Aaaer Location: Bremen Volume: 170 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 350 mm TANK Number of feet: 3 pieces EQUIPMENT Outlet (alternative entry): 36 mm MATERIAL QUALITY Leg material: stainless steel

Condition: used, tank capacity: 2,480 l, GENERAL Features: Crane lugs Design: vertical Remarks: heavy residues; sight glass in the cylinder; various connections on the top head and cylinder Outer diameter: 1,400 mm Total height: 2,900 mm Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 2,480 liters Cylinder wall thickness: 5.0 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,200 mm Last application: food recycling Cgodpfx Ajyck Szjaaer TANK Max. allowable operating temperature: 50 °C Support type: feet Number of feet: 4 units EQUIPMENT Outlet: pipe end, approx. 50 mm diameter MATERIAL SPECIFICATION Feet material: steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 4.9 mm

Condition: used, tank capacity: 2,100 l, GENERAL Design: Suspended Notes: 4 feet, steel (Fe); insulating jacket with small holes; outlet with cover, diameter approx. 170 mm (with a 38 mm diameter connection in the cover); parts of the manhole cover closure made of steel (Fe); manhole cover locking screw bent (see photos) Outer diameter: 1,200 mm Inner diameter: 1,090 mm Overall height: 3,250 mm Insulation: available Agitator: agitator flange Location: Bremen Volume: 2,100 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,150 mm TANK Support type: feet INSULATION Insulation jacket: welded Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in the top head (Ø 430) Outlet: available Cgodpeyclatofx Aaaor Note: light adhesions, dents on the insulation jacket AGITATOR Agitator equipment: 1 agitator flange in the top head; 1 agitator shaft with blades, without motor/gear unit, supplied loose (some agitator blades slightly bent)

Condition: used, tank capacity: 15,000 l, GENERAL Design: suspended Remarks: 4 mounting lugs made of Fe; cone height approx. 1,400 mm; 2 open ports on the cylinder (see photos); drawing available Internal diameter: 1,800 mm Overall height: 6,550 mm Location: Bremen Volume: 15,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,500 mm VESSEL Bottom: conical bottom Mounting type: lugs EQUIPMENT Manhole / dome: in the cylinder (approx. 350 x 450 mm) Outlet: 300 mm Note: minor residues Cgodpeycla Hjfx Aaaer