Used 6 Axis Robot for sale (34,720)

Condition: good (used), Year of construction: 1985, Capacity : 60 kgs. Lhslhcdws Rbz Nj Hof 6-axis simultaneously controlled by Fanuc Teach-In System

Condition: excellent (used), Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler (interlock). The doors are locked in automatic mode and can only be opened during automatic stop or in manual mode after pressing the Doors button on the control panel. When the door is open, the automatic mode cannot be started, the robots and servo drives of the station are stopped, the pneumatic actuators are switched off and cannot be operated. Lelhcsin Edledw Hshf This station consists of 3 functional sub-stations: Functional sequence St.6.1: Control flat cable: Lifting the drive out of the chassis and tilting it Scanning the drive code Checking of 3 flat cable connectors by means of vision sensor on robot gripper arm Re-inserting the drive into the chassis St.6.2: Lid assembly: Manual placing of lids on feeder belts Checking and placing of fed lid on chassis by robot Deposit of wrong types of lids into a magazine St.6.3: Screwing of lids: Screwing of the lid by means of a screwdriving gantry, prior measurement of the screw bore of the screw hole with a camera mounted on the screwdriver axis Epson C3-A601S 6-axis robot Specifications EPSON C3 Type: Vertical articulated arm Payload: (kg) 3/5* Reach: (mm) P-point 600, max. 665 Repeatability: (mm) +/-0.02 Permissible moment of inertia: (kg.m2) J4 0.15 (kg.m2) J5 0.15 (kg.m2) J6 0.1 User wiring: electrical 1x D-Sub 9-pin pneumatic 2x hoses (Ø) 4 mm and (Ø) 6 mm weight: (kg) 27 Control: RC180 Balluff BVS000K Vision Sensor BVS E Advanced Specifications Sensor type Vision: CMOS image sensor black and white Image resolution: 0.3 MP (640 x 480 pixels) frame rate: 3...40 Hz Application: 360° detection range: 50...1000 mm field of view: 16 x 12 mm ... 320 x 240 mm focal length: 12.0 mm Light type: LED red light WSM Automation SE 15/70 (N) Stationary screw unit WSM Automation S-3661.03 MS 100111 Automatic screwdriver WSM Automation SS-400 Control unit servo 1-channel WSM Automation SZ-250 Feeding unit with AFK & FSK WSM Automation SorDrive R2.0 control unit Further assembly modules in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, sleek package. In addition, numerous options are available to enable operation in a wide range of environments. With its high-speed performance, accuracy and wide range of available options, the VS-068 can be used in virtually any application, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-068 6-axis robot with Denso Robot Controller 410200-2611 Lhjlhcdwekz Uzgj Hjf The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49kg Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2013, Condition: excellent (used), For sale is an automation robot of the brand Yaskawa and the type MH50 together with power cabinet and DX100 control system. The system was built by Krauss Maffei and used on a Netstal injection molding machine to sort parts. Operating manuals for DX100 control and operating and maintenance manuals for MH50 Digital available Technical data MH50: Position Model YASKAWA-MH50 Operating hours: approx. 14.000 Year of construction: 2013 Body: Standing Number of axles: 6 Load capacity: 50 kg repeatability: ±0,07 mm Working range S-axis (rotation): ±180° L-axis (lower arm): +135°, -90° U-axis (upper arm): +251°, -170° R-axis (hand roll): ±360° B-axis (wrist rotation/bend): +125° T-axis (hand rotation): ±360° Maximum speed S-axis: 3.14 rad/s, 180 °/s L axis: 3.11 rad/s, 178 °/s U axis: 3.11 rad/s, 178 °/s R axis: 4.36 rad/s, 250 °/s B axis: 4.36 rad/s, 250 °/s T axis: 6.28 rad/s, 360 °/s Permissible torque R-axis: 216 Nm B axis: 216 Nm T axis: 147 Nm Permissible moment of inertia (GD2/4) R axis: 28 kgm2 B axis: 28 kgm2 T-axis: 11 kgm2 Weight approx. 550 kg Dimensions: See pictures On request, transport and loading can be organized throughout Europe for an additional charge. Lolhcdjn E Nhpsw Hjhf Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, 6-axis industrial robot, handling robot, robot, articulated arm robot, robot arm, compact industrial robot DENSO type VM60B1 (VM1300) / VM60B1M-V + RC8A + TP-RC7/8 Robot DENSO VM-60B1M-V Part No. 411800-0100 Serial No. 01C140 Year of manufacture 2019 Version Standard type (VM) Number of axes 6 Handling weight 13 kg Speed combined max. 8300 mm/s Total arm length 520 (first arm) + 590 (second arm) = 1,110 mm Arm reach 1298 mm Working range max. 2600 mm Range of movement: J1: ±170° J2: +135°, -90° J3: +165°, -80° J4: ±185° J5: ±120° J6: ±360° Cycle time 0.95 sec Repeatability ± 0.07 mm User signal lines 10 (for signals from proximity sensors etc.) Controller DENSO Model RC8A-VMA0-NNNP-NM-NNN Part No. 410200-5110 Year of manufacture 2018 Nominal voltage 3 x 200 VAC (for connection in Japan and USA) Nominal voltage 1 x 230 V (single-phase) (for connection in Europe) Rated frequency 50-60 Hz Connected load 3.25 KVA Rated current 8.1 A Peak current max. 16.3 A Control voltage 24 V DC Lhslhcsvi Rz Eedw Hef Interface Ethernet (Lan) RJ45, RS232C, 2 x USB Software version 2.5.2 Language DENSO Robotics (PacScript) Control cabinet dimensions W x H x D 335 x 410 x 95 mm Control panel type TP-RC7/8 No. 410100-1761 - Control cabinet with removable "Teach in" operation - Connection cable plugged in - Control cabinet mounted on base - I/O cable for mini I/O included in scope of delivery Weight of control unit 11 kg Robot tare weight 82 kg Total weight 260 kg Space required for transportation L x W x H 550 x 700 x 1800 mm Very good condition

Year of construction: 2000, Condition: defective spare-parts repository (used), Yaskawa Motoman UP130 6-axis robot with Motoman Xrc control Robot: Motoman YR-UP130-A00 Hand controller :Yasnac Mrc Year of construction: 2000 (6th month) Robot controls: Motoman Xrc ERCS UP130-RE00 Hand control: Yasnac Mrc Year of construction: 2001 - Axis: 6 - Load capacity: 130 kg - Arm extension: 2650 mm Lolhcdsfhkfiow Hehf - Repeatability: 0.2 mm - Robot weight: 1300 kg - controller Xrc - cables, plugs, plugs Structure: vertically articulated type Axis types: S-axis 130 ° / s (2.27 rad / s) L-axis 130 ° / s (2.27 rad / s) U-axis 130 ° / s (2.27 rad / s) R axis 215 ° / s (3.75 rad / s) B-axis 180 ° / s (3, 14 rad / s) T-axis 300 ° / s (5.24 rad / s) Movement areas. S axis 180 ° L axis + 76 ° - 60 ° U axis + 240 ° - 130 ° R axis 360 ° B axis 130 ° T-axis 360 ° Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: ready for operation (used), Technical characteristics Industrial robot for automated production Lslhetzhi Tscdw Hehf Learning and correction function on dedicated computer 2 to 6 axes Load capacity on the arm 150 kg Maximum reach 2700 mm KR C1 control system IP 65 standard Robot set-up area : 1m x 1m Power and Motors Pluging: Three-phased Overall dimensions

Condition: excellent (used), Year of construction: 2011, 6-axis industrial robot ABB IRB6640-235/2.55 Year of manufacture 2011 With teachpanel, IRC5 control, connection cable, robot body Lelhcdweixqhus Hohf We have more robots in stock, mainly from KUKA and ABB

Condition: excellent (used), Mitsubishi industry 6-axis jointed-arm robot Here we offer Mitsubishi industry 6 axis articulated arm robot. Mitsubishi Industry 6-Axis Articulated Arm Robot 6-axis articulated arm robot RV-3SB Lholhcdsi El Acow Hof Load capacity max. 3,5 kg Mass: 38 kg Robot controller CR2B-574-S312 Teachbox R46TB with color/touch display Type: Mitsubishi Melfa RV-3SB Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Welding cell with 6-axis industrial robot FANUC ARC Mate Robot welding system with 2 welding stations SPS - Soudage Production Services type Cellule Junior - AIR LIQUIDE Serial. No. M 2075 Year of construction 2004 Without welding power source, without welding torch - Control Fanuc R-J3IB MATE type A05B-2443-B250 - Teach panel Fanuc A05B-2301-C335 - Control cabinet PLC with welding unit Interface Fronius ROB 5000 OC - 6-axis industrial robot FANUC ARC Mate 50i B 3L Robot arm reach 856 mm Movement speed: J1 140 °/s (2.44 rad/s) J2 150 °/s (2.62 rad/s) J3 160 °/s (2.79 rad/s) J4 400 °/s (6.98 rad/s) J5 330 °/s (5.76 rad/s) J6 480 °/s (8.38 rad/s) Movement range: J1 ±160° J2 +150° - 35° J3 +165° - 125° J4 ±190° Lhelhcdwoqa Txuj Hef J5 ±120° J6 ±360° Robot payload 3 kg Weight of robot only 47 kg - The entire system is designed as a compact welding cell. - Robot control cabinet fixed to the welding cell - Pneumatic turntable, rotation angle 180°, Ø 1200 mm with partition wall - one half of the turntable can be upgraded parallel to the welding cycle. - BINZEL nozzle cleaning machine with spraying system for non-stick agents - Binzel Abicor CAT2 robot holder (three-dimensional shut-off protection) - Operating manual for FANUC R-J3iB control unit Mains connection 3 x 400 VAC, 50 Hz Space requirement L x W x H 2700 x 1600 x 2200 mm Weight of the welding cell approx. 870 kg Good condition

Condition: ready for operation (used), Technical characteristics Industrial robot for automated production Learning and correction function on dedicated computer 2 to 6 axes Payload on the arm 125 kg Maximum reach 2400 mm KR C1 control system Lholstutgfohcdw Hef IP 65 standard Robot set-up surface: 1m x 1m Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Weight: 1100 Kg

Condition: excellent (used), Year of construction: 2012, 6-axis industrial robot ABB IRB6640-205/2.75 year of construction 2012 with connection cable ,Teachpanel ,IRC5 switch cabinet and robot body Lhslhceixqn Tjdw Hef We have many more industrial robots in stock.

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, sleek package. Lsljk E Ez Tehcdw Hohf In addition, numerous options are available to enable operation in a wide range of environments. With its high-speed performance, accuracy and wide range of available options, the VS-068 can be used in virtually any application, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-068 6-axis robot with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49kg Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2015, KUKA used / tested Operating hours: 22528,28h Maximum reach 2696 mm Nominal payload 90 kg Nominal additional load carousel / swing arm / arm 0 kg / 0 kg / 50 kg Nominal total load 140 kg Position repeatability (ISO 9283) ± 0.06 mm Number of axes 6 Installation position floor Installation area 830 mm x 830 mm Range of motion A1 ±185 ° A2 -140 ° / -5 ° A3 -120 ° / 155 ° A4 ±350 ° Ljlhcdjpxm Eiow Hohf A5 ±125 ° A6 ±350 ° Speed at nominal load A1 136 °/s A2 130 °/s A3 120 °/s A4 292 °/s A5 258 °/s A6 284 °/s With KRC4 control, connecting cable (00-215-536 / 00-182-465) and Smartpad (00-188-334) X11 and X13 connector extension Current Software version: V8.3.14 Software options: -Boradpackage -Gripper & Spot-Tech -LoadDataDetermination -Profinet KRC-nexxt -RemoteService -SafeOperation -UserTech

Condition: excellent (used), Stäubli Here we offer you an assembly unit with Stäubli six-axis robot TX90 with control CS8C. IPTE assembly unit total dimension: 1700*1500*2100 mm (L*D*H) The high performance robots of the TX90 series for medium payloads offer the highest possible flexibility due to their compact, slim design, they offer the highest possible flexibility for many applications. Completely enclosed design with internal supply lines Patented Stäubli JCM gear modules ESD industrial robot (for protection against against uncontrolled electrostatic discharge) are designed to safely handle electronic electronic components safely Advantages Perfect protection of components. Standard design in ISO 5 clean room class. Lslohwmuaehcdw Hshf Easy to clean. Optimal use of the working space Technical data: Type: TX90 Number of degrees of freedom 6 Nominal load capacity 6kg Maximum load capacity 15kg Reach 1200 mm Repeatability ±0,035 mm Protection class (wrist) IP65 (IP67) Mounting options floor / wall / ceiling Control unit Stäubli CS8C TX90 Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate,19 inch rack mount version, protection class IP20 All connections on the front side Proven digital technology Type: CS8C + FPMA-D100 monitor Condition: used / used weight: 1500 kg Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email o

Condition: excellent (used), Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer Mitsubishi industrial 6 axis articulated arm robot. RV-Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV-Series offers a highly dynamic 6-axis jointed-arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used / used Ljlhsgkg Euscdw Hehf Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-087 series offers high speed and high performance in a compact, sleek package. In addition, numerous options are available to enable operation in a wide range of environments. With its high-speed performance, accuracy and wide range of available options, the VS-087 can be used in virtually any application, Lhslhcdjkx Hu Asw Hof including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-087 6-axis robot with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS-087A4-AV6-C3N-ANNDN-NNNN Arm reach 905 mm Payload 7.0 kg Cycle time 0.34 sec Repeatability ±0,03 mm Weight 51kg Year of manufacture 2016 Type: Denso 6-axis robot VS-087 / Controller 410200-2611 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer Mitsubishi industry 6 axis articulated arm robot. Mitsubishi Industry 6-Axis Articulated Arm Robot 6-axis jointed-arm robot RV-3SDB-S15 The RV-3SDB jointed-arm robot The RV-3SB robot is specially designed for handling loads up to 3.5 kg. suitable. The IP 65 standard encapsulation ensures that the robot can be used an operation under extreme conditions. Special features: Axis softness adjustment for workpiece tolerance compensation Conveyor belt tracking sensorless collision detection encapsulated design adaptive speed optimization Feature/Function degree of freedom (number of axes) 6 Standard version (oil mist) Mounting: floor, wall or ceiling mounting possible (wall mounting with restriction in J1 axis) Construction: vertical articulated arm Drive system: AC servo (all axes with brake) Position detection: Absolute encoder Range of motion: degrees Body (J1) 340 (-170 to+170) Shoulder (J2) 225 (-90 to+135) Elbow (J3) 191 (-20 to+171) Forearm rotation (J4) 320 (-160 to+160) Wrist tilt (J5) 240 (-120 to+120) Wrist rotation (J6) 720 (-360 to+360) Lholhed H E H Uocdw Hsf Movement speed:degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm rotation (J4) 412 Wrist tilt (J5) 412 Wrist rotation (J6) 660 Resulting maximum speed 5500 mm/s Lifting force Nominal value 3kg Maximum value 3.5kg Reach radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot controller CR1DA-721-S15 (230V) Teachbox R46TB with color/touch display Technical data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection type: Connection to robot controller with circular plug,cable length 7 m Interfaces: RS422 For connection to the robot control Display/Screen: Touch-sensitive 6.5" TFT monitor with backlighting and and 640 × 480 pixel resolution, the touch screen can be operated with fingers or stylus. touchscreen. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer Mitsubishi industrial 6 axis articulated arm robot. RV-Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV-Series offers a highly dynamic 6-axis jointed-arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Lhjlhcdwsgkg Dle Hof Weight 38Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, sleek package. In addition, numerous options are available to enable operation in a wide range of environments. With its high-speed performance, accuracy and wide range of available options, the VS-068 can be used in virtually any application, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-068 6-axis robot with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49kg Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Lolhokz Uy Rscdw Hohf

Condition: excellent (used), Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with a built-in image analysis system, which gives it the ability to "see", so that it can handle assembly automation and inspection tasks with maximum flexibility. It works alongside people and shares the same tasks, without compromising productivity or safety. It offers maximum precision and efficiency while remaining in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive and food industries. Load capacity 4 kg Reach 946 mm Weight 22.6 kg Perfect for Industry 4.0 Maximum flexibility and adaptability extremely low costs for automation and maintenance the TM5-900 is a genuine plug & play solution Connect a monitor, mouse and keyboard to the control unit and the TM5-900 is ready for use in just a few steps. Scope of delivery: Techman TM5-900 robot Control unit, connection cable Control unit 2 calibration plates for the camera system 1 landmark Condition: gebraucht / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone. Lolhcotym Rzodw Hohf

Condition: excellent (used), Here we offer you an ABB industrial robot. Specification: IRB 140 M2000 TPU 2 Panel weight: 98 kg max. reach: 810 mm Load capacity: 6 kg Type: IRB 140 M2000 Scope of delivery: Robot, control unit, cables (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone. Lslhcdwjdyh Hls Hohf

Condition: excellent (used), Year of construction: 2015, Nachi - Fujikoshi Corp Robotic Manipulator, FD -MC10L Six-axis robotic manipulator Nachi Nachi - Fujikoshi Corp (2015) Confessions: Item Description, Parameters Quantity Robotic Manipulator, FD-MC10L 1 pc ∼ Six-axis robotic manipulator nachi ∼ Max. Reach Radius 2019 mm at p-Point ∼ Repeatable Position Accuracy ± 0.06 mm ∼ Wrist Load Capacity 10KG ∼ Arm Load Capacity in the 3rd Axis Location 15kg Absolute Position Readout ∼ High Dynamics of Movements and Arm Rigidity ∼ Protection of the Wrist of the Robot Robot IP65 Control System, nachi FD11 Control Unit of Six-Axis Manipulators nachi ∼ Modular Construction ∼ ∼ ∼ Windows System Kits ∼ Application SW FOR PROGRAMMING MOTIONS FD CONTROL ∼ Built-in PLC module for peripherals ∼ Programming module teach pendant ∼ 15m ∼ JogDial Controller ∼ Ethernet Spread for network connections ∼ FTP client for data backup ∼ USB port ∼ Energy Saving mode ∼ Direct Control of the Welding Source from Learning Pendant PCS ∼ Track length CCA 12000 mm ∼ supports tracks with cleaning station holder and wire stripper Guide ∼ Anchoring to the floor 030 Positioner with support horse 2 pcs ∼ load capacity max. 1500 kg ∼ Maximum Flow Diameter of the Fixture with the Part 1650 mm ∼ Tailstock with Hollow Flange for Media Transfer 6500mm 1st Station and 4500mm 2nd Station ∼ Synchronization with Robot Movements 040 Control Elements 1 Set ∼ Operator Panel – START, STOP, RESET, EMG STOP ∼ Control of Positioners for Loading Parts ∼ Central Control Panel - Visualization of the Workplace, Display, EMG Stop Signal Beacon for Each Workstation 050 Safety Elements and Fencing 1 Set ∼ Modular Safety Walls with Height 2000m, Steel, Solid Blocking ∼ Detection of the Presence of the Robot Against the Workstation ∼ Dividing Partition Between the Stations ~ Barrier of the Entrance to the Station with Optics for the ESAB Welding Source ARISTOMIG U5000I 1 pc ∼ Digital Pulse Inverter 500a ∼ Characteristics For MIG/MAG AND TIG Cooled Robotic Torch ∼ Collision Switch Unit ∼ Feeder 30m/min, digitally controlled Large Capacity Magazine ∼ Power Cable Assembly 070 Automatic Torch Calibration System 1 pc ∼ Detection of Exact Position of Part, Correction of Weld Position by Torch ∼ Absolute Accuracy 0.5 mm ∼ Search by Touch of Nozzle or Wire 080 Automated Cleaning System 1 pc By Robot Control Unit ∼ Nozzle Supply with Cutting Fluid ∼ Shearing Station 110 DIGESTORY By Robot Control System ∼ Release Station for Loading Capacity by Gantry Crane ∼ Driven by Electric Motor 120 Exhaust Unit 1 KS Nederman Unit ∼ Air Exchange 4000M3 PER HOUR ∼ Automatic Control With Robot Start-up, Preparation of Extraction Points According to Its Position ∼ Atomic Filters Filters Filters Filters Filters, Drying ∼ Installation, Distribution, 2PCS Automatic Dampers 130 Tig Torch Assembly with 1 PCS ADDITIONAL WIRE Robot Lhjlhcdev Hnmmew Hjf ∼ Cold Wire Feeder ∼ Holder with Quick-Clamping System for Tig and Mig Feeders Control System Configuration The Robot Is In Very Good Technical Condition and It Is Possible To View It In Us, Or. Vide Vide Vide Video. Time against Automatic Welding Mode: 21Hours, 19Minutes

Condition: used, 6-axis industrial robot, punching robot for sheet metal MOTOMAN / YASKAWA type YR-UP50N-A00 Order. No. S5Q552-1-3 Year of manufacture 2005 Robot serial no. RH9540-5612-2 with MOTOMAN control system Type: NX 100 Handling weight = max. load capacity 50 kg Working radius approx. 1900 mm Own weight of robot: 550 kg + steel plate 1500x1500 mm with base 560 kg Total weight of robot + steel plate with base: 1110 kg With adjustable MUBEA KL 350 hole punches for perforations or notching Adjustment range center-center: 300-3150 mm Bed length of the hole punch unit 3500 mm Pressure output: 350 kN = 35 ton. Projection of the hole punches: 203 mm Dependent weight of the hole punch unit with bed: approx. 1200 kg Vacuum suction cup on the robot with 6 adjustable suction cups Ø 65 mm for holding sheet metal parts, sheet metal blanks (set to 450 x 400 mm in the photos) With alignment table (green plastic plate) 1600 x 700 mm Dependent weight approx. 80 kg With swivel device for turning the workpiece, pneumatically driven Dependent weight approx. 80 kg Lslhcoviw U Sodw Hjhf Fence with 2 doors for loading and unloading the products System footprint 5 x 5 meters

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, welding robot fully equip vertical bend arm robot - with 6 axes - reach: 1525 mm - with automat welding gun, type: DIX MALZ 520 - with wire feed device, manufacturer: FRONIUS, type:ROB.VR1500 DINSE-ZA - with 2 welding working tables (rotary table) - plate dimensions: each 1200 x 750 mm - with pneumatic driven cleaning device - with positioning straightening station for torch - with current source, manufacturer: FRONIUS, type: welding device Lhslhcdjrl S Ufjw Hjf TPS 4000 - with technical documentation - attention: the machine can be transported on a standard truck Technical attributes dimensions (l x w x h) approx. 4700 x 3500 x 3800 mm weight approx. 5000 kg year of construction 2000