Condition: used, tank capacity: 7,400 l, GENERAL Equipment: Level indicator (without guarantee), butterfly valve Design: Rectangular Remarks: 1 manhole approx. 325 x 420 mm in the front base; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (reducing the outlet to DN 50 DIN 11851 with butterfly valve when bolted on) and manhole gaskets have been installed; walls are outwardly dished; total height including end of plastic tube level indicator approx. 3,850 mm Cjdsyckh Njpfx Aaasra Overall width: 1,320 mm Overall height: 3,700 mm Overall length: 2,550 mm Location: Bremen Volume: 7,400 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: Adjustable feet Number of feet: 4 pieces EQUIPMENT Outlet: DN65 DIN 11851 MATERIAL CHARACTERISTICS Foot material: Stainless steel

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: butterfly valve, spray head Design: horizontal Crsdpfx Aeyckl Isaaea Notes: 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent at the junction cylinder/front bottom (see photos) Internal diameter: 2,190 mm Total height: 2,550 mm Total length: 4,100 mm Location: Bremen Volume: 13,000 litres Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical length: 3,000 mm Last application: brewery VESSEL Support type: saddles Number of legs: 3 pcs FEATURES Outlet: DN65 DIN 11851

Condition: used, tank capacity: 1,251 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanized); 2" outlet; minor dents possible; acceptance certificates mostly available (for 5 of the containers the acceptance certificate specifies material as V2A; however, the nameplate states V4A and subsequent measurements also confirmed V4A) Outer diameter: 1,120 mm Inner diameter: 1,120 mm Total height: 1,750 mm Cjdsyckm Sspfx Aaaera Location: Bremen Technical documentation: Acceptance certificate Nameplate: Volume: 1,251 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Last application: Chemicals (polyurethanes) TANK Support type: Frame EQUIPMENT Manhole / Dome: in top head (DN 400) Remark: light residues, signs of use

Condition: used, tank capacity: 10,000 l, GENERAL Design: upright Notes: Manhole approx. 320 x 420 mm; tanks are partially marbled on the outside; the foot lengths of the individual tanks differ slightly (usually one foot is shorter than the other two; the feet should be modified or shimmed as needed before re-installation); one tank has a larger dent in the upper cylindrical area (see photos) Internal diameter: 1,880 mm Total height: 4,250 mm Location: Bremen Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,250 mm Last previous use: Winery TANK Support type: Feet Number of feet: 3 pcs EQUIPMENT Manhole / access: on the cylinder Outlet: 90 mm Note: minor residues/adhesions Cedpoyckqkofx Aaasra MATERIAL SPECIFICATION Foot material: Stainless steel

Condition: used, tank capacity: 500 l, GENERAL Equipment: Disc valve Design: Vertical Remarks: Container slightly out of round; parts of the disc valve are lower than the bottom surface (take this into account when positioning the container); outlet slightly bent upwards; tank has dents at the cylinder/bottom transition (see photos) Internal diameter: 800 mm Total height: 1,070 mm Top cover: open Location: Bremen Nameplate: Volume: 500 liters Cylinder wall thickness: 2.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm Previous use: paint industry CONTAINER Bottom: Flat bottom EQUIPMENT Outlet: 48 mm Note: slight residues TECHNICAL DATA / DIMENSIONS Cjdpfx Aajyckrboaora Bottom wall thickness: 2.5 mm

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: spray head Design: upright Remarks: Minor differences in execution between the two tanks (e.g., outlet positions); manway diameter approx. 510 mm; a former manway and 1 connection in the lower cylinder area were welded shut by the previous operator; 1 tank has a small dent in the insulation jacket; see photos Speed: 900 rpm Outer diameter: 1,800 mm Inner diameter: 1,690 mm Total height: 4,550 mm Insulation: present Power: 0.55 kW Agitator: propeller Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,500 mm Last use: dairy TANK Support type: feet Number of feet: 4 INSULATION Insulating jacket: hermetically welded Insulating jacket material: stainless steel EQUIPMENT Manway / dome: in top head Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Leg material: stainless steel AGITATOR Agitator manufacturer: Stelzer Voltage: 220/380 volt Crodpfxjyckrhe Aaaja Agitator position: side-mounted on cylinder Agitator details: On one agitator, the propeller is missing and the motor terminal box is damaged (see photos)

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: Drive-under frame made from V2A stainless steel Internal diameter: 1,100 mm Codpfx Aoyckrneaaora Total height: 1,470 mm Location: Bremen Nameplate: Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: Cosmetics TANK Base type: Frame EQUIPMENT Manway/dome: in top head (DN 400) Outlet: DN50 DIN 11851

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole diameter approx. 580 mm; metallic discoloration inside in the upper head area; insulation jacket with dents and minor sheet metal cutouts External diameter: 2,720 mm Internal diameter: 2,480 mm Total height: 8,050 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 160°C Max. permissible operating overpressure: 6.0 bar Agitator: agitator flange Location: Bremen Nameplate: Volume: 30,000 liters Double jacket volume: 90.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 5,980 mm Last application: wool grease TANK Max. permissible operating temperature: 70°C Stand type: feet Number of feet: 4 pcs Csdpfeyck Nmsx Aaaera HEATING/COOLING JACKET Internal tempering: full pipe coil INSULATION Insulation jacket: bolted Insulation jacket material: aluminum EQUIPMENT Manhole / dome: in cylinder Outlet: flange DN125 Note: light residues, manhole cover plated MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) Feet material: steel AGITATOR Agitator arrangement: mounted laterally on the cylinder

Condition: used, Year of construction: 2004, tank capacity: 83,500 l, GENERAL Equipment: Venting, spray head, crane lugs Design: upright Year of manufacture: 2004 Remarks: The specified overall height is based on manufacturing drawings and may vary slightly Internal diameter: 3,850 mm Overall height: 8,690 mm Max. overpressure: 0.5 bar Location: external storage Technical documentation: drawing Nameplate: Volume: 83,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 600 mm Previous application: fruit juice TANK Max. allowable operating temperature: 50 °C Specific gravity of medium: 1.35 (to/m³) Base design: adjustable feet Number of feet: 8 pcs EQUIPMENT Manway / access port: in cylinder (approx. 350 x 450 mm) Outlet: DN100 DIN 11851 MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 5.4 mm Top plate wall thickness: 3.0 mm Crsdpjyck Rkofx Aaasa

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: butterfly valve Design: container Remarks: frame Fe (galvanized); frame partially with corrosion Overall width: 1,220 mm Overall height: 1,660 mm Overall length: 1,035 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Crjdpfx Aaoyck Sbjaoa TANK Support type: frame EQUIPMENT Manway / access hatch: in the top head (DN 400) Outlet: 40 mm Note: slight residues

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame Fe (galvanized); Frame partially showing corrosion Overall width: 1,220 mm Overall height: 1,550 mm Overall length: 1,020 mm Location: Bremen Nameplate: Capacity: 1,000 liters Cedpfxjyck Shj Aaajra Product-contacting material: V2A 1.4301 (AISI304) Condition: used TANK Support type: Frame EQUIPMENT Manway / Dome: in top head (DN 400) Outlet: 40 mm Note: slight residue/adherences

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: disc valve Design: rectangular Remarks: Internal base approx. 1,180 x 1,180 mm; internal height approx. 790 mm; manual lever for outlet valve is missing Total height: 2,050 mm Location: Bremen Nameplate: Volume: 1,100 litres Credjyck S Uopfx Aaaoa Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended use: foodstuff TANK Bottom: flat bottom Support: height-adjustable legs Number of legs: 4 pcs. EQUIPMENT Manhole / dome: on top (Ø 430) Outlet: 50 mm Note: slight residue present MATERIAL SPECIFICATION Leg material: stainless steel

Condition: used, tank capacity: 1,800 l, GENERAL Design: rectangular Remarks: Double-chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); each chamber has a manway, diameter approx. 415 mm; each chamber has 1 outlet (1 x internal pipe diameter approx. 35 mm, 1 x internal pipe diameter approx. 38 mm); 2 welded reinforcements made of V2A in one of the chambers (see photos) Total width: 2,080 mm Total height: 1,500 mm Total length: 1,100 mm Location: Bremen Crjdpoyck Tfsfx Aaasa Volume: 1,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Food products TANK Mounting: Feet Number of feet: 4 pieces EQUIPMENT Manway / Dome: on the tank MATERIAL CHARACTERISTICS Outer surface: marbled Feet material: stainless steel

Condition: used, tank capacity: 560 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanised); Handhole diameter approx. 210 mm (one container is missing the handhole cover; this container also has more severe dents (see photos)); ball valves are very stiff to operate (possibly defective) Crjdpfeyck Upsx Aaaja Internal diameter: 1,080 mm Overall width: 1,120 mm Overall height: 1,100 mm Overall length: 1,120 mm Location: Bremen Nameplate: Volume: 560 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Last application: Chemicals TANK Supporting structure: Frame EQUIPMENT Manway / Dome: in top head (DN 400), handhole Outlet: DN50 DIN 11851 Note: slight residues, signs of use

Condition: used, tank capacity: 3,000 l, GENERAL Equipment: Disk valve, spray nozzle Design: upright Notes: Small dents and several small holes (corrosion) in the insulation jacket; 1 overflow pipe inside the tank; outlet pipe dented (see photos) External diameter: 1,930 mm Internal diameter: 1,690 mm Total height: 2,400 mm Insulation: present Top head: conical base Location: Bremen Nameplate: Volume: 3,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,400 mm Previous application: dairy TANK Bottom: dished end Support design: feet Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 80 mm Remark: slight residues MATERIAL QUALITY Crjdpfx Aoyclaaeaaea Material of feet: stainless steel

Condition: used, tank capacity: 1,200 l, GENERAL Equipment: Ventilation/inlet and outlet, spray head Design: upright Remarks: Manhole diameter approx. 380 mm Internal diameter: 990 mm Total height: 2,550 mm Power: 1.1 kW Agitator: Propeller Location: Bremen Volume: 1,200 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,500 mm Credjyclibjpfx Aaaea Last application: beverage industry TANK Base type: height-adjustable feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: on top head Outlet: DN40 DIN 11851 Note: slight residues present MATERIAL PROPERTIES Feet material: stainless steel AGITATOR Voltage: 220/380 volts Agitator position: lateral on cylinder Agitator equipment: motor/gear unit incomplete and with signs of corrosion

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Discharge tap Design: Container Remarks: Frame, Fe (galvanized; some braces slightly bent) Overall width: 1,230 mm Overall height: 1,650 mm Overall length: 1,030 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: chemicals TANK Base type: Frame EQUIPMENT Cjdpfx Aaeyclkroasra Manhole / Dome: in upper head (DN 400) Discharge: present Note: slight adhesions, signs of use

Condition: used, tank capacity: 150,000 l, GENERAL Equipment: Venting/intake, crane lugs Construction type: upright Remarks: Minor dent in cylinder Outside diameter: 4,000 mm Total height: 11,600 mm Top head: conical bottom Location: external storage Nameplate: Volume: 150,000 liters Cjdpfx Asyci Alsaajra Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: food VESSEL Lower head: flat bottom with slope Support design: flat bottom with slope EQUIPMENT Manhole / cover: in cylinder Outlet: present

Condition: used, tank capacity: 50 l, GENERAL Design: vertical Remarks: Lid made of 1.4541 (V2A); tank with small dents Cjdpfx Aeyci Axoaasra Internal diameter: 450 mm Total height: 360 mm Top: open with loose lid Location: Bremen Volume: 50 litres Product contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 320 mm Last use: cosmetics TANK Base design: support ring EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Top material: AISI304 (V2A) 1.4541

Condition: used, tank capacity: 400 l, GENERAL Equipment: Disc valve Design: upright Notes: Container is slightly out-of-round due to construction; mobile on 4 plastic castors; the outlet fitting is screwed onto an outlet DN 50 DIN 11851; lid material 1.4301 (V2A) Internal diameter: 790 mm Total height: 1,100 mm Top: open with loose lid Location: Bremen Volume: 400 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 820 mm Last application: cosmetics CONTAINER Bottom: flat bottom with slope Type of support: mobile on castors Crsdpfx Ajyci Dieaasa EQUIPMENT Outlet: DN25 DIN 11851 MATERIAL SPECIFICATION Top material: AISI304 (V2A) 1.4301

Condition: used, tank capacity: 1,600 l, GENERAL INFORMATION Equipment: Crane lugs Design: horizontal Notes: 2 loose bearing shells made of V2A; manhole DN 500 Internal diameter: 990 mm Total height: 1,700 mm Total length: 2,550 mm Location: Bremen Volume: 1,600 litres Cjdpfoyci Egsx Aaasra Cylinder wall thickness: 5.0 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical length: 2,000 mm TANK Mounting type: saddle supports EQUIPMENT Manhole / dome: on the tank Outlet: flange DN50 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.9 mm

Condition: used, tank capacity: 290,000 l, GENERAL Design: vertical Notes: Insulation cover is likely partially missing; overall height specified according to drawing, external diameter according to previous operator; one manhole 350 x 450 mm in the lower bottom Outer diameter: 4,380 mm Inner diameter: 4,200 mm Overall height: 23,000 mm Insulation: present Location: outdoor storage Technical documentation: drawing Volume: 290,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Last application: beer tanks TANK Base design: support ring Cedpfx Aaoyci Hkjasra INSULATION Insulation material: PU foam EQUIPMENT Manhole / dome: in the upper head (DN 500) Outlet: 100 mm

Condition: used, tank capacity: 350 l, GENERAL Fittings: Disk valve Design: upright Remarks: Mobile on 4 plastic casters; loose aluminium lid; tank slightly out of round Crsdpfxjyci I Ie Aaaja Internal diameter: 790 mm Total height: 1,000 mm Top: open with loose lid Location: Bremen Volume: 350 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 750 mm Previous application: pharmaceutical TANK Bottom: flat bottom Stand type: mobile on casters FITTINGS Outlet: DN32 DIN 11851

Condition: used, tank capacity: 630 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); total height and width stated due to 2 connections (see photos) Total width: 950 mm Total height: 1,670 mm Total length: 1,600 mm Max. overpressure: 0.2 bar Location: Bremen Nameplate: Volume: 630 liters Product-contact material: V4A 1.4435 (AISI316) Condition: Used Last application: Pharmaceutical TANK Max. perm. operating temperature: 100 °C Bottom type: Conical bottom Support type: Mobile frame Crjdpfxjyci R No Aaaea EQUIPMENT Manhole/Dome: In top head (DN 400) Outlet: 250 mm Note: Signs of use

Condition: used, tank capacity: 200 l, GENERAL Design: upright Remarks: Drum lid made of 1.4541 (V2A); lid partially with connection approx. 6 mm diameter (see photos); drums partly with minor dents Internal diameter: 560 mm Total height: 900 mm Top head: removable / hinged top head Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 860 mm Previous use: pharmaceutical Codpfx Ajyci S Tjaasra EQUIPMENT Outlet: not available MATERIAL PROPERTIES Top head material: AISI304 (V2A) 1.4541