Condition: excellent (used), Zwick / Roell Type: BS2-FR250SW.A4K.003 Zwick / Roell material testing machine 250 KN Product information: Data value: Load frame Paint finish RAL 7021 and RAL 7038 Ambient temperature +10 ... +35 °C Air humidity (non-condensing) 20 ... 90 % Drive Motor AC servo motor with concentrated windings Hiperface® motor feedback system Control, setpoint specification Digital (real-time Ethernet, EtherCAT) Controller / cycle time adaptive / 1000 Hz Positioning repeatability on the traverse ± 2 μm Measurement and control electronics Number of available slots for measurement and control modules 2 synchronized module bus slots (expandable to 5) 1 synchronized PCIe slot Force measurement class 0.5 / 1 depending on Force transducer, in accordance with DIN EN ISO 7500-1, ASTM E4, Calculated resolution (e.g. force transducer in tension / compression direction) 24 bit Dcjbu Utov Aimgom Ueg Measurement value sampling rate, internal 400 kHz Measurement value transmission rate to PC 500 Hz (optional 2000 Hz) Zero point correction automatic at the start of measurement Measurement signal runtime correction for all channels yes Interface to PC Ethernet Eco mode yes, automatic shutdown of power unit (time adjustable) CE conformity yes, according to Machinery Directive 2006/42/EC Connection values Mains frequency 50/60 Hz Electrical connection 400V +/-10% (3Ph, N, PE) Z250 SW Load frame Test force FN in tension / compression direction 250 Height 2340 ... 2360 mm Width 1600 mm Width with electronic unit 1820 mm Depth 1040 mm P 1: top, fixed traverse top 1675 mm P 2: bottom, fixed traverse top 1655 mm P 3: bottom, fixed traverse bottom 1595 mm P 4: top & bottom, with additional traverse 1440 mm Total weight with electronics 2100 kg Noise level at maximum test speed 70 dB (A) Drive Traverse speed up to 0.00005 110% of the test force (vmin ... vNenn) ... 600 mm/min Increased traverse return speed (with reduced force) 1000 mm/min Displacement resolution of the drive 0.19227 nm Connection values Power consumption 6 kVA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Baltographe, Baltograph -Dimensions: 715/270/H410 mm Debu Ued Sacpotm Ujcg -Weight: 78.5 kg

Condition: excellent (used), Glass scale Manufactured by Heidenhain Dsbov Avcuou Utm Uocg Type LS 603 ID No. 2376407 k S. No. 6869 491 M U 4 Measuring length 1640 mm Stock number (28598)

Condition: as good as new (ex-display), x-travel , mm Ironing measuring screw, measurement range: 225-250 mm Dcobuev Dxzvo Utm Ujg Machine dealer with own stock of 1600 m².

Condition: reconditioned (used), Year of construction: 2008, machine/vehicle number: FARO-PT08, Faro Fusion Arm in top conditionArm 7 axis, length 6ft (appx. 1,8m) Accuracy 36/51µm Last calibration 2011 incl. very new Aberlink 3D software (free updates) Windows 10 PC or notebook (used) on demand Inca Premium software (+ € 4.000,--) or other application (Polywork, PcDmis, MComos.) On demand we can deliver a granit plate with 1500x1000mm. Softwaretraining possible Dcjbu Uepqx Ifotm Ujg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, A 300W microwave sysytem for dry matter/humidity and density and fat determination. A system similar to an NIR analyzer. It quickly determines moisture(humidity), solids and fat, which helps save a lot of money in drying production processes, for example draying pasta and other products with flour or eggs to check fat Debusu Hatis Utm Uscg

Condition: ready for operation (used), Year of construction: 1989, X-axis: 250mm, z-axis: 605mm, max. tool diameter: 711mm, adaptation: SK40 and SK50, control: Heidenhain. On-site inspection is possible. Dsbsv Ubquou Utm Uocg

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Dcjbu Utjvzz A Rom Usg Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2020, Condition: like new (used), With autom. feed + discharge Workpieces are fed in as bulk material, inspected, bad parts are sorted out and good parts are transferred to containers as bulk material. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - line scan camera (4K), surface inspection parts bunker SKAKO, 71 l volume up to 125 kg storage New price: € 230.000,-. Dcebu Utelpcm Rem Usg

Condition: new, machine/vehicle number: S7250919000, Endress+Hauser Proline Promag H 300 electromagnetic flow meter Dcebu Utjvhdarem Ujg 5H3B40-FRX1/0 (5H3B40-AAIBAEAFBAFDDSGAA1+) Temperature range: -20 °C to +150 °C Connection: DN40 – 1½” Power supply: 19.2…28.8VDC 85…264VAC 50/60Hz Measuring range: 42m3/h Serial number: S7250919000

Condition: used, The Keyence VR-3000 is an advanced optical 3D measuring system that enables high-precision, non-contact measurements. It captures detailed profile and surface data in seconds and is ideal for industrial quality control and manufacturing. This device is used, but tested and fully functional. Dcobu Utev Nh Amsm Ueg Specifications: Measurement method: Optical 3D scanning, non-contact Measurement range: Depends on model (details upon request) Accuracy: High-precision profile and surface measurement Area of application: Quality control & production metrology Condition: Used, tested & fully functional Scope of delivery: 3D measuring system including accessories

Condition: used, Functionality: fully functional, Production of cutting samples for destructive material testing. 20 cutting discs are also included. Dcjbswaau Iju Utm Ueg

Year of construction: 2001, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Dsbu Utsv T Tncem Ujcg Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: refurbished (used), Small load hardness tester 323 from Zwick Small load hardness tester used and refurbished. Conventional Vickers hardness tester with integrated camera for load levels: HV 0.3 - 0.5 - 1 - 2 - 3 - 5 - 10 The individual load levels are set by placing the weight discs. Dcsbu Utsi Hbrdjm Usg Condition : used, overhauled, warranty included Painting : RAL 9001 (cream white) This device is supplemented by our video measuring system with integrated camera. Through the digital evaluation you get a fully documentable measuring system.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Dcjbuen Arqdj Utm Usg Inner dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume 500 l Temperature range chamber room temp. up to 50°C Mains supply 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, The Mitutoyo Avant Contracer is a high-precision contour measuring device for precise measurements of profiles, edges, and surface textures. It is used in quality control and manufacturing to ensure accurate measurement results. The device is used, but tested and fully functional. Specifications: Measuring range: Depends on model (details upon request) Accuracy: High-precision contour measurements for industry and manufacturing Area of application: Quality control and production metrology Dcsbu Utov Nhzpjm Uog Condition: Used, tested, and fully functional Scope of delivery: Contour measuring device including accessories

Condition: excellent (used), Heraeus-Vötsch Here we offer a Heraeus-Vötsch temperature chamber Water cooled Djbu Usn Arpyjtm Uocg Temperature range -70°C to +180°C Heating 5 K/min Cooling 5 K/min Temperature deviation -+ 1.0 K Test chamber volume Test chamber dimensions 825 x 800 x 920 mm (WxDxH) Outer dimensions 1025 x 2530 x 2100 mm (WxDxH) Adjustable test space: lowest position 773 mm highest position 1215 mm Rated power 16 kW rated current 37A weight approx. 950 kg Type: HTV 7057-5/S Scope of delivery. (See picture ) We can answer further questions for you on the phone. Written order possible by email or fax

Condition: used, Year of construction: 2002, The Wenzel RS-Plus is a powerful CNC coordinate measuring machine for high-precision industrial measurements. Thanks to its robust construction and advanced metrology, it is ideal for quality control and manufacturing. This machine is used, but fully functional and tested. Specifications: Dcebu Uov Nhwwetm Usg Measuring range: Depends on model (details upon request) Accuracy: High-precision measurement results for industry and manufacturing Control: CNC-controlled for automated measuring processes Area of application: Quality control and production metrology Condition: Used, tested, and fully functional

Condition: excellent (used), Active cooling system Here we offer you an active cooling system. Dsbu Ujn Apnaetm Uscg Active cooling system Type: EOL EMP 242 Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2003, Metris MCA24-M7 Measuring Arm – Used, Precise & Reliable The Metris MCA24-M7 is a portable 7-axis measuring arm with a 2.4 m measuring range for flexible and precise 3D measurements. Ideal for industry, manufacturing, and quality control. Dcsbu Utsv Nht Som Uog Measuring Range: 2.4 m Axes: 7 Accuracy: Highly precise, tested Condition: Fully functional, includes accessories and carrying case Use: Mobile CMM for industrial measurements

Condition: excellent (used), Espec Here we offer an Espec(ThermoTec) stress test chamber. Overpressure humidity tests at over 100 degrees in many different modes Program capacity of 10 patterns with 30 steps per pattern A variety of protection mechanisms; overheat/overpressure protection, detection of water- supply failure.Complete door interlock and temperature sensor. Saturated Temp Range 105 to 142.9°C Unsaturated Temp Range 105 to 132.9°C Humidity range 50 to 100% r.h. Nominal pressure 0.196 MPa at 132.9°C and 100% e.F. External dimensions: width 740 x height 1553 x depth 1000 mm Test chamber dimensions: Width 355x Height 355 x Depth 426 mm Dcsbu Utmen Arzne Ujg Other equipment: with rails and grid Test material connections in the interior Type: EHS-221M Scope of delivery: See pictures 300 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), S & A Test Chamber Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Dcebu Uton Arl Sjm Usg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Aermec chiller heat pump Here we offer you Aermec chiller. Aermec WRL 081 Chiller WRL is a water cooled heat pump Water indoor installation Technical data cooling mode: Cooling capacity 19.70 kW Power consumption 5.70 kW EER 3.46 W/W Dobuon Arm No Utm Uscg In 12.30 A Imax 24.00 A Dimensions Height 1126 mm width 1757 mm Depth 798 mm Weight 260 kg Type: WRL 081 YEA Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions Width 470 mm Depth 650 mm Height 410 mm External dimensions Width 930 mm Depth 2115 mm Height 1970 mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Dcsbjn Arc Aeu Utm Ujg Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a FRT MicroSpy Mobile. Device name: FRT MicroSpy Mobile Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Dcebsg Sr D Heu Utm Usg The portability of the MicroSpy Mobile makes it ideal for mobile use on heavy machinery, vehicles, rollers, glass, etc. machines, vehicles, rollers, glass panes or other large components. High-resolution and non-destructive measurements of important surface characteristics such as roughness, contour, topography, layer thickness, wear, contact ratio or volume. Smaller samples can be measured directly on the measuring table Can be used on large components and machines Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile xy-relief 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross roller guide Drive: DC motor with recirculating ball screw Travel (measuring range XY): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: Rotary encoder Measuring system resolution: 0.25 µm Repeat accuracy XY: < ± 1 µm Table runout (per axis): < 2 µm / 50 mm of which not reproducible ): < 0.5 µm perpendicularity XY: < 4 µm / 50 mm z-axis, motorized: Type Position r Drive Travel Position measuring system Measuring system resolution Rope sc