Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Dcjb Heup T Uqsdk Eqog fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TSS-70/130 CTS water-cooled temperature shock test chamber Type series TSS -70/130 Test chamber volume 130 liters Test chamber dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature operating range: Temperature range in °C : Hot chamber +50/+250°C Cold chamber -80/+100°C Retempering of ICs < 15 min in kg 10.0 Car changeover time in sec. < 10 Max. test weight in kg 50 Temperature constancy over time in K ± 1 Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load in kW approx. 16.6 Condenser chiller water-cooled Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Feed-through Ø in mm 125 Refrigerant: R404A/R23 Weight: 950 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant Djb Hotql H Asdk Eqocg 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Deb Hdsudvg Rek Eqjcg Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Dcsb Hsuudx Dedk Eqog Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), TIRA Type: Walk-in climate simulation cell TCZ 4012 S(m) Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range Dsb Hdksuvipwo Eqjcg 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 13m³ External dimensions (WxDxH) approx. 2260mm X 3850mm X 2780mm Test chamber (WxDxH) approx. 2254mm Χ 2645mm Χ 2251mm Door opening (WxH) approx. 2251mm X 2254mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: Walk-in climate simulation cell WK 50 / 40-120 Technical data climatic chamber: Temperature range -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range 15...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test room volume: 50m³ External dimensions (WxDxH) approx. 4800mm X 6100mm X 2640mm Test chamber (WxDxH) approx. 4500mm Χ 5000mm Χ 2200mm Door opening (WxH) approx. 3000mm X 2200mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Dob Hjuvi R Aedk Eqecg We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Dob Hotz Rl Djdk Eqocg Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 24 KW Rated current: 42 A Refrigerant: R-404A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: Djbjtr Dins Hdk Eqjcg R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Deb Hdksu H U Two Eqscg Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 4200/S Water-cooled climatic test chamber Irradiation device with metal halide radiator Door with window Internal dimensions : Width 2000 mm Height 1000 mm Depth 1150 mm External dimensions : Width 3300 mm Height 2000 mm Depth 1250 mm 2X pipe penetration 125 mm Performance range for temperature tests without irradiation Temperature range - 40°C to +150°C Temperature deviation ± 0.5 K in time, in the supply air to the test room Temperature change rate according to DIN 50 011 Part 12 Heating: approx. 1.0 K/min. Cooling: approx. 1.0 K/min to -30°C Performance range for climatic tests without irradiation Temperature range +10°C to +95°C Temperature constancy ± 1.0 K over time, in the supply air to the test room Humidity range 10 to 95 % r.h. Humidity constancy ± 1 to ± 3 % r.h. over time, in the supply air to the test room Dew point range +5°C to +88°C Irradiation (solar simulation attachment) Irradiation type: 4 pcs. 2 kW metal halide radiators each Irradiance 1000 W/m² ± 5 % in the range 280 to 3000 nm Irradiation uniformity ± 50 W in the guaranteed area Reference plane taking into account the installed lateral reflector plates Test area (W x D) 1700 x 800 mm with distance reference plane - UK irradiation unit of approx. 750 mm or 400 mm above the floor Performance range for temperature tests with irradiation Temperature range -10°C to +100°C Temperature deviation in time ± 1.0 K, in the supply air to the test room Rate of temperature change according to DIN 50 011, part 12 Heating: approx. 1.5 K/min. Cooling: approx. 0.5 K/min. Performance range for climatic tests with irradiation Temperature range + 10°C to + 80°C Temperature deviation ± 1.0 K over time, in the supply air to the test room Humidity range 10 % to 85 % r.h. Humidity deviation ± 1 % to ± 3 % r.h. temporally, in the supply air to the test room Dew point range + 5°C to + 76°C Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 90°C to 0°C in 1 h 0 °C to - 40°C in 1 h 0 °C to + 90°C in 1 h Humidity change 0 °C to + 90°C / 80 % r.h. in 1 h + 90°C / 80 % r.h. to 0°C in 1 h, whereby the final dehumidification value is not defined. Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 47°C to -30°C in 1 h - 30°C to + 23°C in 1 h + 23°C to + 47°C in 1 h Connections: Nominal voltage 400 V +6/-10 %, 3/N, 50 Hz Rated power 23 kW Nominal current 49 A Cekon 63 A plug Connection cable approx. 3.5 m Fuse protection 63 A, slow-blow on site Installation room Heated, with level floor Heat output to the installation room approx. 7 kW with radiation module switched on Weight approx. 2000 kg Condition: used Scope of delivery: (see picture) Dcjb Hdksvccwlj Eqjg (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 4006 Vötsch temperature and climate test chamber, air-cooled 32 bit S!MPAC* control with touch panel Potential-free contact for test material switch-off Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system TCP/IP interface Large observation window Test room lighting 1 pipe feed-through 50 mm 2 insertion grilles Air-cooled cooling circuit Humidification bath Calibration of 2 temperature values and 2 humidity values Test chamber capacity 64 liters Performance for temperature tests -40 to + 180°C Temperature deviation temporal ±0.3 to ±1.0 K Temperature homogeneity in space ±0.5 to ±2.0 K Dsb Hdk Esu Spxleqscg Rate of change Heating 3.5 K/min Cooling 5.0 K/min Heat compensation max.800 W Temperature calibration value +23 °C and +80 °C Performance for climate tests VCL Temperature range +10 to +95 °C Humidity range 10 to 95%r.H. Humidity deviation over time ±1 to ±3 %RH Temperature deviation temporal ±0.3 to ±0.5 K Temperature homogeneity in space ±0.5 to ±1.5 K Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: Width 760 mm Depth 980 mm Height 1070 mm Sound pressure level: 56 dB(A) Nominal power, max. 1.8 kW Rated current: 8.0 A Electrical connection: 1/N/PE AC 230 V ±10 %, 50 Hz Refrigerant: R 404A Weight: 235 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2019, Instron Type: Instron Model 5982 floor model (extra height) The system has only been used a little. The furnace shown is unused and was built in 2021. Universal mechanical testing machine INSTRON 5982 from 06/2019 with lots of accessories. Applications: Determination of mechanical properties of materials such as: tensile, compressive, bending, shear strength, etc. Elastic modulus, shear modulus, elongation and hysteresis, fracture toughness Technical data: Measuring range: 100 kN Accuracy and resolution of the load cell: < 0.5 N, linearity – < 0.03%, hysteresis: ± 0.002% nominal load Crosshead displacement sensitivity: 0.001 mm (internal) Position control resolution: 9 nm Overload capacity: approx. 120% nominal load Display: via PC with Bluehill software + independent controller Measurement frequency: up to 0.1 Hz to 1 kHz Displacement speed: Under load: 0.001–1000 mm/min, without load: 0.001 –1100 mm/min Max. crosshead travel: 1000 mm Climate chamber for Tensile Testing: Chamber for Soil Model System 3119-617 Temperature Rating -80°C to 350°C Cooling option required to achieve sub-ambient temperatures. Internal Dimensions 400mm x 400mm x 660mm External Dimensions 550mm x 910mm Measurement Technology AVE 2 2663-901 AVE 2 The second generation advanced video extensometer (AVE 2, catalog number 2663-901) uses patented measurement technology in the fastest, most accurate, non-contact strain measurement device on the market. The fully integrated device is easily adapted to the normal environmental conditions in your laboratory as well as to any test device on the market. Description: Configuration E2-F1-G1 Capacity 100 kN Measuring cell series 2580-100 Debsvhblle Hdk Eqecg Equipped with 2x product clamps up to 100 kN Width between the columns 575 mm Height of the columns 1930 mm Overall dimensions; width 1130 mm height 2770 mm Movable traverse Adjustable limit switches Wired digital control console Touchscreen PC Instron Bluehill software 240 volts 47-63 Hz 3500 VA 20 amp Own weight 898 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Dsb Hsiz Tqcedk Eqjcg Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Vötsch temperature chamber. Vötsch temperature chamber water cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Dcoboichqqo Hdk Eqjg Inside: W x D x H (mm) 800 x 800 x 790 Volume test chamber 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Speed heating : 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Weights: 675 kg Type: VT/S 7050 R404 A and R23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C Dob Heigg Eqodk Eqecg weight: 400 kg Type: KU 300/09-06-06 K111183701 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Djbed Sr S Ij Hdk Eqecg

Condition: excellent (used), Here we offer electrodynamic vibration unit a RMS. RMS electrodynamic vibration equipment Test Manager SWR 900 Subrack SWE 348 Charge amplifier SWE 366 Charge amplifier SWE 366 PSU SWE 350 Type: Test Manager SWR 900 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax Dsb Hdkodyh E Ho Eqscg

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C Djb Hdk Eocnic Djqecg ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer a Binder material test chamber with forced air circulation. Binder material test chamber FP 115 Model: FP 115 Cabinet type: Material test cabinet Internal volume: 115 l Max. load: 11 - 50 kg Maximum temperature (heat): + 300 °C Internal width (incubators,...): 600 mm Internal depth (incubators,...): 410 mm Internal height (incubators,...): 480 mm Width outside (incubators,...): 835 mm External depth (incubators,...): 645 mm External height (incubators,...): 705 mm Item weight: 62.00 kg Condition: gebraucht / used Scope of delivery: (see picture) Dsb Hed E I Arsdk Eqjcg (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Angelantoni Type: CH600 VT Water-cooled Angelantoni climatic chamber with humidity Test chamber volume 600 liters Dob Hdkjhuixve Eqocg External dimensions: Width 1230 mm x depth 2730 mm x height 1936 mm Internal dimensions: width 850 mm x depth 733 mm x height 980 mm Characteristic values for temperature tests Temperature range -40°C to +180°C Temperature change rate from -40°C to +150°C 2 K/min Temperature change rate from +150°C to -40°C 2 K/min Characteristic values for climate tests Temperature range: +10°C to +90°C Humidity range: 10% to 98% r.h. Nominal voltage: 400V 50Hz 3+N+earth Nominal output: 14 kW Refrigerant: R404 A Weight: approx. 1500kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: defective spare-parts repository (used), Oxford Instruments Here we offer you an X-ray fluorescence analysis. Can analyse thickness and/or composition of coatings Up to 15 elements simultaneously Dimensions: W 1450 mm x D 1450 mm x H 900 mm Weight: approx. 185 kg Type: X-Strata 960 Condition: Only to be used as spare part dispenser Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Dcobshaapfj Hdk Eqeg Further questions we can answer gladly on the phone for you.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Dcjb Hdk Ejgkafieqjg Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), RMS Vibration test system Here we offer you a RMS electrodynamic vibration test system. RMS Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N power amplifier TGA 3000-000.00 Condition: used / used Untested! Tests were not possible Dceb Hdkjgk I I To Eqog Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min Dsb Hdohxyg Hok Eqecg cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature cabinet. Heraeus Vötsch temperature chamber water cooled Test chamber volume 110 liters Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm Outer dimensions: Width 850 mm Depth 1030 mm Height 1640 mm Temperature range - 70°C to +180°C Temperature deviation in time ±0.1 to ±0.5 K Temperature deviation spatial ±0.5 to ±1.5 K Dsb Hjhrdy Sjdk Eqjcg Temperature gradient 1 to 3 K Temperature change rate cooling 3.2 K/min Temperature change rate heating 3,5 K/min Refrigerant: R-404 A / R 23 Voltage 1/N/PE AC 230V±10% 50Hz Rated power 1,8 kW Rated current 12 A Type: VT 7011 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.