Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Godox Eabpspfx Ab Uouk Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. Gujdpfx Abjx Hhkwo Uek This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Type: MICROSPEED 10 Year 2007 Gedpfjr Igwnox Ab Ueuk Measuring machine control cabinet with remote control.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli Guodjx Ebx Aepfx Ab Uok ● Year: 2002 ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Condition: not inspected (used), functionality: unexamined, measuring range X-axis: 800 mm, measuring range Y-axis: 1,400 mm, measuring range Z-axis: 500 mm, table width: 1,170 mm, table length: 2,120 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Bidding obliges the buyer to collect the machine within the specified timeframe: from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 1,400 mm Travel Z-axis: 500 mm Worktable dimensions: 2,120 x 1,170 mm Magnetic chuck dimensions: 600 x 200 mm MACHINE DETAILS Guodoxqqkfspfx Ab Uek Dimensions & weight Dimensions (L x W x H): 3,000 x 2,400 x 3,500 mm Weight: 7,000 kg EQUIPMENT Magnetic clamping plate Workshop drawer cabinet with contents Various measuring tools (measuring pins and touch probe) Additional suitable accessories

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Guedpfx Abjx Exmtj Usk Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2022, Bareiss Bareiss digi test II Hardness Testing Device – Year of Manufacture 2022 – Shore A/B/0 + Accessories Item Description: For sale is a complete Bareiss digi test II hardness testing system, year of manufacture 2022, in very good condition. The device is designed for precise and automated hardness measurement of elastomers, rubber, and soft plastics according to Shore standards (Shore A / B / 0). The system is fully functional, comes from a laboratory environment, and has only been used rarely. All plates, serial numbers, and manufacturing data are present. Made in Germany. Typical areas of application: - Quality control in industry - Laboratory and material testing - Testing according to DIN EN ISO / ASTM standards - Serial measurements with reproducible results Technical data: Input voltage: 110–240 V AC, 50–60 Hz Gjdpfx Absx D U T Rs Usuk Power consumption: max. 20 VA Measuring method: Automatic hardness tester according to Shore A/B/0 Origin: Made in Germany Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See picture) - Bareiss digi test II control unit - Motorized test stand / measuring module type DTAA II - Rotofix adapter for sample fixation - Original operating manual - Three Bareiss accessory cases including inlays (Subject to changes and errors in technical data and information!) We are happy to answer further questions for you by phone.

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 50 kg, total height: 1,090 mm, total width: 330 mm, total length: 530 mm, Used 5 kN tensile and compression testing machine. Can be supplied with load cells ranging from 5 N up to 5 kN, depending on your requirements. The Emperor software works perfectly under Windows 11. Currently, many testers in the Netherlands and Belgium are still operating with this software. The software features an advanced module that allows the programming of highly complex procedures. There is also a basic mode for use in, for example, a production environment. In this mode, tests can be run with a single mouse click, and results are clearly displayed with a pass/fail indication. All data is, of course, stored and can be retrieved later. Gujdpfxsx Apnto Ab Uok The price includes a load cell of your choice (subject to availability), delivery within the Netherlands and Belgium, commissioning, and training. We provide a 6-month warranty. If the tester fails within this period, we will repair it if possible; if not, the purchase amount will be deducted as a discount on a new tensile testing machine.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg. Gjdpfjxw N Uvox Ab Ujuk

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, A Keyence 3D measuring system is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Keyence (Japan) • Model: XM-1500 (measuring system) • Measuring head: XM-T1000 • Year of manufacture: 2016 • With hand probe, adhesive plate • Measuring range: 300x250x150mm • Display unit: 1 µm • Angular resolution: 0.0001 ° • Max. workpiece weight: 25 kg • Condition: Used, functional Guodpfxjx Himgs Ab Usk The measuring machine was used until recently and is fully functional. Shipping costs by freight forwarder: approx. £100 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C Gedpfx Asx D Abpjb Usuk • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN Gjdpfx Aox Apg Aeb Uouk – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: excellent (used), Shimadzu Shimadzu EZ-LX Universal Testing Machine + Trapezium X Software – 5 kN For sale is a professional materials testing machine from Shimadzu, model EZ-LX from the EZ-Test series. This system is suitable for performing tensile, compression, and flexural tests on a wide range of materials. The machine comes complete with a PC system, monitor, keyboard/mouse, Trapezium X software (version 1.5.1), and comprehensive documentation. Ideal for laboratory, research, quality assurance, or training applications. Gjdpfx Aox Dbixeb Ueuk Features of the device: - Tensile and compression testing up to 5 kN - Precise measurement of force and displacement - Fully automatable test sequences - Creation and analysis of diagrams & test reports - Emergency stop button and safety functions - Operation via PC with installed software Technical data: - Model: Shimadzu EZ-LX - Power supply: 200–230 V - Frequency: 50/60 Hz - Power consumption: 850 VA - Fuse: 250 V / 5 A (slow-blow) - Force capacity: 5 kN - Dimensions: approx. 70 × 50 × 150 cm - Weight: approx. 55 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery (see picture): - Shimadzu EZ-LX testing machine - PC (Lenovo) incl. monitor, keyboard & mouse - Installed Trapezium X software - Original manuals and documentation - Connection cables (Subject to changes and errors in the stated specifications!) Please feel free to contact us by phone with any further questions.

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone. Godpfx Aox Da Awob Uouk

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions Godox A Ur Repfx Ab Usuk This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: excellent (used), GÖTTFERT Device type: MI-3 (011.01.3) Model/ Revision 01.00-A/R For sale is a Göttfert Melt Flow Index Tester MI-3, device type 011.01.3, revision 01.00-A/R. Göttfert is one of the leading manufacturers of polymer testing equipment, particularly for MFI/MFR/MVR measurements (Melt Flow Index). This model is used for determining the melt flow index (MFR) or melt volume rate (MVR) and is intended for quality control of thermoplastics in accordance with ISO 1133 and ASTM D1238. Note Göttfert MI-3 devices are used worldwide in laboratories for precise MFI/MFR/MVR measurements. Ideal for laboratory, training, research, plastics engineering, or as a source of spare parts. Description / Function: A melt flow index tester measures the flow behavior of plastics under defined pressure and temperature conditions. Typical Applications: Material quality control Batch comparison Investigation of aging and degradation Research and development The plastic is plasticized in the heated barrel and extruded through a standard die under defined load. The determined melt index serves as a quality parameter for many plastics. Technical Specifications (complete) Device Information Model: 11.01.3 Temperature Temperature range: 50 to approx. 450°C (typical for MI-3 model) Temperature accuracy: ±0.1°C Temperature stability: ±0.1–0.2°C Multi-zone heating system Measuring System Standard barrel: Ø 9.550 ± 0.005 mm Die dimensions: Length: 8 mm Orifice: Ø 2.095 mm Very high repeatability (characteristic of Göttfert) Supports all standard MFR/MVR methods Supported test weights (model-specific) Standard: 2.16 kg Additional possible weights: 1.2 / 3.8 / 5 / 10 kg (depending on configuration) Operation Integrated color touchscreen display Graphical test control Options for automatic cutting unit (depending on model) Electrical Data: Voltage / Frequency: 230 V / 50 Hz Power consumption: 870 VA Can be operated directly on the European power grid Scope of delivery Göttfert MI-3 melt flow index tester Various accessories and tools (dies, cleaning tools, piston tools, etc.) Operating manuals All as shown in the pictures Important Note: "The table shown in the photos is not included in the sale." Condition: used Guodpfx Aox A Tr Aeb Uek (Specifications and details are subject to change and errors!) We are happy to answer further questions by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Gedpox A Aa Ajfx Ab Ujuk Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Zwick Gedpfex A Aaiox Ab Ujuk Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone. Gujdpfox Az Skjx Ab Usk

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was built in 2022. It is suitable for all types of material testing, for example tensile, compression, and bending tests in laboratory, industrial, and quality control environments. Technical data of the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Test Force (Fnom): 10 kN Gjdpfjx Aqxmex Ab Ujuk Model: Z010 TN ProLine, nominal force: 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuously up to nominal force High-precision guidance, very low noise generation High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/elongation control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series is among the most precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photos) Zwick/Roell ProLine Z010 testing machine Test head / compression device PC system with monitor, keyboard, and mouse Various test fixtures and accessories (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), CTS CTS CW-60/11 – Water-Cooled Climate Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for performing temperature and humidity testing on multiple specimens simultaneously. Device Description This climate test cell enables functional or material property testing of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculated air volume ensures optimal transfer conditions for the test specimens. The air conditioning section is located at the rear of the inner chamber. The system components are mounted in a separate frame behind the chamber for easy accessibility. Control electronics are housed in a discrete control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber can be performed via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm wall clearance - Temperature ramp rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 to ±5 % RH - Without thermal radiation - At equilibrium state Technical data assume ambient temperature of +25 °C, rated voltage 400 V, without test load, without radiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable volume): - Volume: approx. 11,000 liters (11 m³) - Approximate internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, continuously variable output via electronic control and monitoring system - Eco-friendly refrigerants: R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight carrier available – Costs & arrangements on request - Scope of delivery: (see picture) (Technical data subject to change and errors excepted.) Gujdpfx Ajx Ankyeb Usk Further questions can be answered by phone.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation Gusdox Anipjpfx Ab Uok - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Gusdpfx Abex Ag R Sj Uok Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 Gedoxz A Evepfx Ab Ueuk For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Gusdoxzprcjpfx Ab Uek Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.