Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Fob Eou U Ixms Sfgdjgb Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), LDS Type: V824 + Tira sliding table + SPA30K Shaker for medium forces Technical data: Sine force vector 26.689 kN (peak) Noise force vector 25,355 kN (effective) Half sine force vector 53,376 kN Mass of the movement element 21.55 kg Frequency range d.c. - 3200 Hz Sinus Bacceleration max. 981 m/s² Noise Acceleration max. 50 gn rms Velocity max. 1.78 m/s Deflection ± 12.7 mm Sliding table: WxHxD: approx. 1650 mm x 925 mm x 2450 mm Work surface: 991 mm * 991 mm Usable frequency range 0 to 2000 Hz thickness of the panel : 50 mm Weight of the panel: 94 kg Max load : 2200 kg Condition : gebraucht / used Fgob E Sfgouzf R Aodeb weight: Shaker approx. 1725 kg Sliding table 3500 kg Scope of delivery: (see pictures) Total weight approx kg 5300 (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 sec. Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Fjb E Son Aq Ufofgdsgb Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Feb Ejq Dpzys Sfgdogb Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Fsb E Sfgogkaibedjgb Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Espec Temperature Shock Chamber Here we offer you an Espec temperature shock chamber. Thermal shock environmental chamber (cold load: -65° to 0°C). Conventional thermal shock chambers with three zones can be quite large because three separate chambers are used. The TSA series has only one chamber, significantly reducing its size. Instead, it circulates cold, hot or ambient air as needed. The conditioned air can be precooled or preheated beyond the set point, allowing for faster recovery to the desired condition after transfer. Espec Temperature Shock Chamber Water Cooled TSA-201S SN: 153000154 Hot chamber: +60 to 200°C Cold chamber: -70 to 0°C Working temperature: 0-40°C System: two zone or three zone test by flap switching. Performance: Test range: High temperature. Exposure range: +60 to +200°C Low temperature. Exposure range: -70 to 0°C Temperature variation ±0.5°C Hot chamber: Temperature Heating time: ambient temp. to +200°C within 15 min. Cooling chamber: Temperature Pulldown time: ambient temp. to -75°C within 45 min. Temperature recovery: within 10 min. Inner dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Power supply: 380/400/415V AC 50Hz: 70 A Refrigerant: R404/R23 Weight: approx. 1400 kg Type: Espec Model: TSA-201 SW Fsb Esg S Ugko Sfgdsgb For you as a buyer, the following information for your safety! The following points are checked on our offered chambers in advance.

Condition: excellent (used), Eliog Here we offer you a chamber air circulation furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C Fgob E Sfgjifkiijdsb weight: 400 kg Type: KU 300/09-06/2 K1051071 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2011, Condition: excellent (used), Here we offer you CTS temperature test chamber. Control-32 bit controller LCD control panel Digital display of set and actual values Numerical input of the setpoints Error messages in plain text Interface RS 232 Free switching channels for on-site test material control Temperature tests: temperature range -30°C to +80°C temperature deviation ±0,3 K temporally Temperature change rate heating 2 K/min Cooling 1.5 K/min to -10°C Heat radiation approx. 1000 W at +20°C approx. 200 W at -25°C Data for gas supply: Temperature range: -25°C to +55°C Temperature deviation: ±0.25 K to the test space Temperature change rate measured on average at a gas flow of 10 Nm³/h: at least as fast as the test chamber Data for the gas return: Temperature range: +18°C to +30°C Temperature deviation: ±0.25 K to the test chamber Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with the large purge volume N2 until the oxygen content is less than 3%. After that, the system switches to a base load (approx. 10% of the large flush volume). is switched over. The nitrogen flow rate of the base load is measured with a flow meter, displayed and monitored by a limit switch. and monitored by means of a limit switch. The O2 monitoring system continuously extracts from the test chamber via a flashback arrestor gas from the test chamber via a flame arrester and passes it over an O2 sensor that monitors the residual oxygen content of the extracted air. The gas is then returned to the test chamber via a second flashback arrestor. test chamber. The exhaust pump is monitored by a volumetric flow meter. Further details can be found can be found in the Dräger operating instructions in the appendix. The gas device is currently out of service! The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V , without test material, without irradiation and without additional equipment. Dimensions: Test volume 950 liters Test chamber dimensions height approx. 700 mm / width approx. 900 mm depth approx. 1500 mm External dimensions height approx. 2400 mm / width approx. 1270 mm depth approx. 3125 mm Operating data: Fgsb Eoihb Amo Sfgdjb Electrical connection 400V+6/-10 %, 3/N,50 Hz rated power 21,6 kW rated current: 36,5 A Protection class IP 54 condensate drain pressureless R 1/2" female thread Sound pressure level < 62 dB(A) (according to DIN EN ISO 3744 measured at 1m distance from front) weight: approx. 1500 kg, control cabinet approx. 300 kg external refrigeration unit refrigerant R404A / R23 Type: T-30/950 Ex/I For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature chamber Here we offer Weiss temperature chamber. Converted to R452a Weiss temperature chamber air cooled Temperature range: from - 30°C to 180°C Temperature change rate cooling 1,6 K/min Temperature change rate heating 2,1 K/min Test chamber dimensions: Width 550 mm x depth 750 mm x height 800 mm Housing dimensions: Width 800 mm x depth 1500 mm x heights 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4,9 kW Rated current 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For you as a buyer the following information for safety! Fgsb Esic Rgfe Sfgdsb The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Fgsb Eed Nfq Io Sfgdsb Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), Vötsch climatic test chamber Fgsb Eoqnutms Sfgdeb Here we offer a Vötsch climate test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Rate of temperature change: Heating 4.0 K/min Cooling 3.0 K/min max. heat compensation at +20°C 4500 Watt Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer a Jouan C02 incubator CO2 incubator. The CO2 incubator is used to grow cell cultures. The following conditions are required for this: a sterile atmosphere a constant temperature a CO2-enriched atmosphere high humidity Dimensions and weight: Temperature range: room temperature + 5 ° C to 50 ° C CO2 detector: Infrared Size: 90 x 73 x 60cm Internal dimensions: 66 x 48 x 45 cm Outer material: steel Interior material: Stainless steel Inner door: Safety glass CO2 Incubator Jouan IG 150 Water jacket volume 85 liters maximum Volume 154 liters Maximum number of trays (3 supplied) Usable area per tray 0.16 m2 Usable maximum incubation area: 1.28 m2 minimum spacing height 66 mm empty weight approx. 80 kg Weight when filled with water approx. 170 kg Weight with packaging approx. 100 kg Power connection required: 230 V, 50 or 60 Hz. Power consumption max. 800 VA, normal consumption at 37 °C: 220 watts Fuses therm. Magnetic switch, set to 5 A at 220 V Phases earthed. Color of connections brown = phase, blue = neutral, yellow/green = earth Working range: Ambient temperature 15 - 30°C CO2 inlet pressure 300 mbar - 3 bar Interior temperature range from 5°C above room temperature to 45°C Working range with CO2 gas 0.0 % to 20.0 0/0 Article weight: 80.00 kg Type IG 150 Scope of delivery: (see picture) 2 weeks commissioning guarantee The device comes from stock. We deliver with express shipping (DHL, UPS, TNT) Fjbjccb N Uj E Sfgdsgb We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: Fjb E Sfocnic Segdsgb ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Type: 4220A Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate Fgoborbigfj E Sfgdob 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Fgjb E Sforbiyfjgdob Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Feb E Ssiu H Hcefgdogb Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. max. workpiece weight 30 kg at center height 100 mm 80 kg with center height 150 mm measuring range length 0 mm to 700 mm measuring range outer diameter 0 mm to 120 mm max. throwing distance to be measured 100 mm tip height 100 mm Measuring blades probe and caliper 1 mm x 5 mm Dimension (W x D x H) machine 2060 mm x 920 mm x 1750 mm controller box 600 mm x 800 mm x 2200 mm Fgsb E Ssi Ezh Uefgdob Weight approx. 900 kg Electrical power 230 V / 1200 W / 50 Hz Air pressure 6 bar Type: Helio-Pan II 700 Scope of delivery: (See picture) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer you a Vötsch emission chamber. Water cooled Test chamber volume 1000 liters (usable) (916) liters Adjustment tank 480 liters Performance for temperature tests: Temperature range +20°C to +130°C Temperature deviation temporal K ±0.1 to ±0.3 Temperature deviation spatial K ±0,5 Temperature gradient K 1 Temperature rate of change: Cooling K/min 0.3 Heating K/min 0,4 Performance for climatic tests: Carrier gas conditioning with climatic module Fsb Eei Hbyle Sfgdegb according to the evaporation principle Temperature range +20°C to +130°C Humidity range 5 to 95% Dew point range +5°C to +60°C Humidity deviation in time % ±1 to ±3 Carrier gas exchange rate 0.1 to 1.8 chamber volume per hr. Capacity range for desorption Desorption temperature up to max. +240°C, adjustable Test chamber surface temperature between +220°C and +240°C Purge rate max. 4 m³/h Test chamber dimensions: Width 750 mm Depth 1630 mm Height 750 mm test chamber door 670 x 670 mm Outer dimensions: Width 1350 mm Height 2950 mm Height 2050 mm rated current 32 A nominal power 19,0 kW Electrical connection 3/N/PE AC 400V ± 10% 50Hz Weight 1200 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VCE 1000/S Condition: used / used Scope of delivery: (See picture) Sale ex location (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Microanalysis of elements including boron and above Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Operating humidity Fgeb Eshx Ncho Sfgdsb

Condition: excellent (used), RMS Vibration Test System Here we offer you a RMS electrodynamic vibration test equipment. RMS Vibration Test System Vibration exciter SW 3006 Power amplifier TGA 1500 Technical data: Sine:3,7 kN Noise:3,7 kN Shock:3.7 kN Displacement pk-pk:26 mm Feb Eohyly Rs Sfgdogb Speed: 0.9 m/s Acceleration: 80 g Cooling: air cooled Condition: used / used Untested! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), White Type: SC / KWT - 1000 Technical data: Salt spray mist test MIN 5 K > Tu MAX +50°C Condensation water test MIN 5 K > Tu MAX +45°C Humidifier MIN 5 K > Tu MAX +75°C Temperature constancy The temperature deviation over time is ±1 K Dimension with hood: Test chamber: H 1190 mm x W 1650 mm x D 570 mm Dimensions without hood: Fgjb E Sorh Dmqefgdsb Test area: H 740 mm x W 1650 mm x D 570 mm Dimensions with hood: Outside: H 1370 mm x W 2730 mm x D 800 mm Dimensions without hood: Outside: H 920 mm x W 2730 mm x D 800 mm Capacity approx. 700 - 1130 liters 3/N/PE AC 400V ±10%50Hz Rated power 4 KW Rated current 7.5 A Weight: 180 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Fob E Sfgjrknagodogb

Condition: excellent (used), Sonix Type: Echo VS Acoustic scanning microscope enables the inspection of packaging. Features: To detect the smallest and most subtle defects in state-of-the-art packaged microelectronics applications, Fgsbjtz Rkme E Sfgdjb ECHO VS includes standard features such as heated water for optimal acoustic coupling, flexible TAMI for efficient acquisition of the most useful data, Waveform Averaging for improved signal-to-noise ratio, ICEBERG for improved image quality and MFCI for improved image quality in the most demanding applications. ECHO VS is the ultimate ultrasonic NDT device for molded flip chips, CSP, MCM, stacked die, MUF and other advanced packaging technologies. Detects air defects as small as 0.01 microns and spatially resolves defects down to 5 microns. Image enhancement suite with heated water, waveform simulation and other innovations for industry-leading image quality in advanced packaging applications Image optimization for improved image quality in complex molded flip chips (MUF) and packages with polyimide layers Waveform averaging for improved signal-to-noise ratio Wide range of converters from very low to ultra-high frequency Stacked Die Imaging (SDI) (optional) Molded Flip Chip Imaging (MFCI) Voltage / power consumption: 100-120/220-240 VAC 1PH/N/PE, 50/60 Hz 10 A Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multi-device operation on one PC: Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Fgsb Eotq Em Te Sfgdob Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg Fgob Ejtrf Ule Sfgdob The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.