Condition: excellent (used), Eliog Here we offer you a chamber air circulation furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06/2 K1051071 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Dslinoifkiioqiqocg Further questions we can answer on the phone for you.

Year of construction: 2011, Condition: excellent (used), Here we offer you CTS temperature test chamber. Control-32 bit controller LCD control panel Digital display of set and actual values Numerical input of the setpoints Error messages in plain text Interface RS 232 Free switching channels for on-site test material control Temperature tests: temperature range -30°C to +80°C temperature deviation ±0,3 K temporally Temperature change rate heating 2 K/min Cooling 1.5 K/min to -10°C Heat radiation approx. 1000 W at +20°C approx. 200 W at -25°C Data for gas supply: Temperature range: -25°C to +55°C Temperature deviation: ±0.25 K to the test space Temperature change rate measured on average at a gas flow of 10 Nm³/h: at least as fast as the test chamber Data for the gas return: Temperature range: +18°C to +30°C Temperature deviation: ±0.25 K to the test chamber Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with the large purge volume N2 until the oxygen content is less than 3%. After that, the system switches to a base load (approx. 10% of the large flush volume). is switched over. The nitrogen flow rate of the base load is measured with a flow meter, displayed and monitored by a limit switch. and monitored by means of a limit switch. The O2 monitoring system continuously extracts from the test chamber via a flashback arrestor gas from the test chamber via a flame arrester and passes it over an O2 sensor that monitors the residual oxygen content of the extracted air. The gas is then returned to the test chamber via a second flashback arrestor. test chamber. The exhaust pump is monitored by a volumetric flow meter. Further details can be found can be found in the Dräger operating instructions in the appendix. The gas device is currently out of service! The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V , without test material, without irradiation and without additional equipment. Dimensions: Test volume 950 liters Test chamber dimensions height approx. 700 mm / width approx. 900 mm depth approx. 1500 mm External dimensions height approx. 2400 mm / width approx. 1270 mm depth approx. 3125 mm Operating data: Electrical connection 400V+6/-10 %, 3/N,50 Hz rated power 21,6 kW rated current: 36,5 A Protection class IP 54 condensate drain pressureless R 1/2" female thread Sound pressure level < 62 dB(A) (according to DIN EN ISO 3744 measured at 1m distance from front) Djlineihb Amsqiqjcg weight: approx. 1500 kg, control cabinet approx. 300 kg external refrigeration unit refrigerant R404A / R23 Type: T-30/950 Ex/I For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature chamber Here we offer Weiss temperature chamber. Converted to R452a Weiss temperature chamber air cooled Temperature range: from - 30°C to 180°C Temperature change rate cooling 1,6 K/min Temperature change rate heating 2,1 K/min Test chamber dimensions: Width 550 mm x depth 750 mm x height 800 mm Housing dimensions: Width 800 mm x depth 1500 mm x heights 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4,9 kW Rated current 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For you as a buyer the following information for safety! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Dcolinqoic Rgfoiqjg Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Dcsled Nfq Ijinqiqjg Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climate test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Rate of temperature change: Heating 4.0 K/min Cooling 3.0 K/min max. heat compensation at +20°C 4500 Watt Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 Djlinqieqnutmjqjcg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer a Jouan C02 incubator CO2 incubator. The CO2 incubator is used to grow cell cultures. The following conditions are required for this: a sterile atmosphere a constant temperature a CO2-enriched atmosphere high humidity Dimensions and weight: Temperature range: room temperature + 5 ° C to 50 ° C CO2 detector: Infrared Size: 90 x 73 x 60cm Internal dimensions: 66 x 48 x 45 cm Outer material: steel Interior material: Stainless steel Inner door: Safety glass CO2 Incubator Jouan IG 150 Water jacket volume 85 liters maximum Volume 154 liters Maximum number of trays (3 supplied) Usable area per tray 0.16 m2 Usable maximum incubation area: 1.28 m2 minimum spacing height 66 mm empty weight approx. 80 kg Weight when filled with water approx. 170 kg Weight with packaging approx. 100 kg Power connection required: 230 V, 50 or 60 Hz. Djlinqeccb N Ueiqjcg Power consumption max. 800 VA, normal consumption at 37 °C: 220 watts Fuses therm. Magnetic switch, set to 5 A at 220 V Phases earthed. Color of connections brown = phase, blue = neutral, yellow/green = earth Working range: Ambient temperature 15 - 30°C CO2 inlet pressure 300 mbar - 3 bar Interior temperature range from 5°C above room temperature to 45°C Working range with CO2 gas 0.0 % to 20.0 0/0 Article weight: 80.00 kg Type IG 150 Scope of delivery: (see picture) 2 weeks commissioning guarantee The device comes from stock. We deliver with express shipping (DHL, UPS, TNT) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Type: 4220A Dcelinecnic Seqiqeg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Dcjlinqierbigfsqog 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Dolinqorbiyfoiqocg Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Dolinsiu H Hcoqiqecg Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. max. workpiece weight 30 kg at center height 100 mm 80 kg with center height 150 mm measuring range length 0 mm to 700 mm measuring range outer diameter 0 mm to 120 mm max. throwing distance to be measured 100 mm tip height 100 mm Measuring blades probe and caliper 1 mm x 5 mm Dimension (W x D x H) machine 2060 mm x 920 mm x 1750 mm controller box 600 mm x 800 mm x 2200 mm Weight approx. 900 kg Electrical power 230 V / 1200 W / 50 Hz Delsi Ezh Ueinqiqscg Air pressure 6 bar Type: Helio-Pan II 700 Scope of delivery: (See picture) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer you a Vötsch emission chamber. Water cooled Test chamber volume 1000 liters (usable) (916) liters Adjustment tank 480 liters Performance for temperature tests: Temperature range +20°C to +130°C Temperature deviation temporal K ±0.1 to ±0.3 Temperature deviation spatial K ±0,5 Temperature gradient K 1 Temperature rate of change: Cooling K/min 0.3 Heating K/min 0,4 Performance for climatic tests: Carrier gas conditioning with climatic module according to the evaporation principle Temperature range +20°C to +130°C Humidity range 5 to 95% Dew point range +5°C to +60°C Humidity deviation in time % ±1 to ±3 Carrier gas exchange rate 0.1 to 1.8 chamber volume per hr. Capacity range for desorption Desorption temperature up to max. +240°C, adjustable Test chamber surface temperature between +220°C and +240°C Purge rate max. 4 m³/h Test chamber dimensions: Width 750 mm Depth 1630 mm Height 750 mm test chamber door 670 x 670 mm Outer dimensions: Width 1350 mm Height 2950 mm Height 2050 mm rated current 32 A nominal power 19,0 kW Electrical connection 3/N/PE AC 400V ± 10% 50Hz Weight 1200 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VCE 1000/S Condition: used / used Scope of delivery: (See picture) Sale ex location Dcslinsi Hbyljqiqeg (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Dcelohx Nchsinqiqog Microanalysis of elements including boron and above Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Operating humidity

Condition: excellent (used), RMS Vibration Test System Here we offer you a RMS electrodynamic vibration test equipment. RMS Vibration Test System Vibration exciter SW 3006 Power amplifier TGA 1500 Technical data: Sine:3,7 kN Noise:3,7 kN Shock:3.7 kN Displacement pk-pk:26 mm Speed: 0.9 m/s Acceleration: 80 g Cooling: air cooled Condition: used / used Untested! Tests were not possible Delehyly Rjinqiqecg Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), White Type: SC / KWT - 1000 Technical data: Salt spray mist test MIN 5 K > Tu MAX +50°C Condensation water test MIN 5 K > Tu MAX +45°C Humidifier MIN 5 K > Tu MAX +75°C Temperature constancy The temperature deviation over time is ±1 K Dimension with hood: Test chamber: H 1190 mm x W 1650 mm x D 570 mm Dimensions without hood: Test area: H 740 mm x W 1650 mm x D 570 mm Dimensions with hood: Outside: H 1370 mm x W 2730 mm x D 800 mm Dimensions without hood: Outside: H 920 mm x W 2730 mm x D 800 mm Capacity approx. 700 - 1130 liters Dcjlinqjrh Dmqjiqog 3/N/PE AC 400V ±10%50Hz Rated power 4 KW Rated current 7.5 A Weight: 180 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Dolerknagsinqiqscg Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Sonix Type: Echo VS Acoustic scanning microscope enables the inspection of packaging. Features: To detect the smallest and most subtle defects in state-of-the-art packaged microelectronics applications, ECHO VS includes standard features such as heated water for optimal acoustic coupling, flexible TAMI for efficient acquisition of the most useful data, Waveform Averaging for improved signal-to-noise ratio, ICEBERG for improved image quality and MFCI for improved image quality in the most demanding applications. ECHO VS is the ultimate ultrasonic NDT device for molded flip chips, CSP, MCM, stacked die, MUF and other advanced packaging technologies. Detects air defects as small as 0.01 microns and spatially resolves defects down to 5 microns. Image enhancement suite with heated water, waveform simulation and other innovations for industry-leading image quality in advanced packaging applications Image optimization for improved image quality in complex molded flip chips (MUF) and packages with polyimide layers Waveform averaging for improved signal-to-noise ratio Wide range of converters from very low to ultra-high frequency Stacked Die Imaging (SDI) (optional) Molded Flip Chip Imaging (MFCI) Voltage / power consumption: 100-120/220-240 VAC 1PH/N/PE, 50/60 Hz 10 A Condition: gebraucht / used Delinotz Rkmoqiqocg Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Dslinotq Em Toqiqscg Resolution: < 0.005 Multi-device operation on one PC: Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Djljtrf Ulsinqiqscg Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Internal dimensions (net) H approx. 2150 mm W approx. 3000 mm D approx. 6000 mm Air circulation system (on chamber rear wall) Width approx. 800 mm External dimensions with machine unit and without control cabinets Height approx. 3360 mm Width approx. 3320 mm Depth approx. 8620 mm Machine room, attached to the rear wall of the chamber Height approx. 2340 mm Width approx. 3320 mm Depth approx. 1500 mm Electrical control cabinet, mounted on the side of the base frame Height approx. 2340 mm Width approx. 2400 mm Depth approx. 600 mm Chamber door (double-leaf) Height approx. 2150 mm Width approx. 3000 mm Pedestrian door (single-leaf) Height approx. 1900 mm Width approx. 900 mm Lighting (switch next to pedestrian door) 4 incandescent lamps 60W Feed-throughs 4 pcs. 125 mm ∅ Floor load capacity 30,000 N/m² (surface load); 2,500 N per polyamide wheel Ø100mm; 4,000 N for a wheel with 4 cm² Ceiling opening (clear dimensions of the lower disk) Dcslstrmm Neinqiqog Length approx. 600 mm Width approx. 700 mm Quantity: 10 pieces Ceiling load: 10 SoSi radiators + 1 person 90 kg Working temperature range: Temperature range -40 °C ... +120 °C (discontinuous) Cooling speed: approx. 1 K/min. linear from 80°C to -40°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. At temperatures < (-20°C) the recirculated air volume is reduced by 50%. (e.g. PV 1200) Heating speed: approx. 1 K/min. linear from -30°C to +90°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. (e.g. PR 308.2) Test specimen mass: 600 kg aluminum (vehicle - partial body) Working range climate without sunlight simulation: Temperature range: +10 °C ...+95 °C Temperature constancy: ≤ ± 0.5 K (temporal) Temperature constancy: ≤ ± 2 K (spatial) Humidity range: 20 ... 80 % r.h., without thermal load Dew point temperature range: -2 °C ...85 °C without thermal load Climate working range with sunlight simulation: Temperature range: +23 °C ...+50 °C Temperature constancy: ≤ ± 0.5 K (temporal) Humidity range: 20 ... 70 % r.h., with thermal load Dew point temperature range: -2 °C ...43 °C without thermal load Thermal load of the SoSi: Max. 10 kW Temperature and humidity instances: Temperature The following maximum deviation is specified for the temperature in the climate and temperature range (including measurement uncertainty and with test material): Blow-out after 15 minutes: ±1K Intake after 45 minutes: ±1.5K (external sensor) Humidity For the relative humidity at the operating point 80°C / 80% r.h. the following maximum deviation (including measurement uncertainty and with test material) is specified: Blow-out after 30 minutes: ±3% r.h. Intake after 60 minutes: ±3% r.h. (external sensor) Connection and consumption data: Air-cooled refrigeration unit, maximum air temperature +38°C Refrigerant R 404 A and R23 Water supply for humidifier: Approx. 40 l/h = 40 kg/h installed steam output, demineralized water, electrical conductivity 5-20 μS/m Mains connection: 400 V; 3 PH + N + PE; 50 Hz Connected load: 250 kVA, 350 A Connection according to VDE 0110 group 2: 5x185 mm2 CU On-site fuse protection: 355 A Air circulation volume (FI-controlled): 24,000 to 28,000 m³/h FC basic setting: 50% (achievement of the parameters) Technical data solar simulation: Manufacturer: BF Engineering GmbH Type: G-BEM-1119 Number of lights: EPSU 2 x 2k_HQI Ballast: 10 Ignitor: IGC-4k-03 Light source: OSRAM HQI 2000W High Flux 3〜/ N / PE

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Delsu Au Uteinqiqecg Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), VLM Dolinqijt Igc Soqecg Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), LDS Type: V895-440 HBT900C with amplifier SPA50K Technical data: Fitting Dimensions: 440 mm Sinusoidal force vector 55.6 kN (peak) Rausch force vector 55.6 kN (effective) Half sine force vector 166.8 kN (peak) Frequency range 0 to 2100 Hz Sinusoidal acceleration max. 981 m/s² Noise Acceleration max. 490 m/s² Speed max. 1.6 m/s Deflection ± 63.5 mm Oscillator mass 55 kg Max. load 700 kg Amplifier dimensions : Dcslouy H I Tjinqiqjg WxHxD mm : 537mm x 1905mm x 895mm Weight 622 kg Sliding table: Work surface: 900 mm * 900 mm Thickness of the top : 50 mm Weight of the top: 80.4 kg Max load : 7250kg Effective frequency range 5-2000 Hz Condition : gebraucht / used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: LxHxW approx. 2700 x 1500 x 1800 mm Scope of delivery: (see pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Delieru Dzujnqiqjcg Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. Dslistqnklsnqiqecg With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.