Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. Crob Herbiyfob Rfqjb can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss temperature test chamber with external condenser Weiss WT3-1000/70 air-cooled Test chamber dimensions: Height: 950 mm, width: 1100 mm, depth: 950 mm Test chamber external dimensions: Height 1995 mm, width: 1300 mm, depth: 2450 mm Test chamber capacity: approx. 1000 liters Operational hours: 7274 h Creb Hot E Sd Aeb Rfqsb Year of construction: 2012 Entry ports: R1 and R2: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature change rate Heating 4.0 K/min Cooling 2.5 K/min Heat compensation at 20°C max. 3000 W Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,8 kW Rated current: 29,0 A Refrigerant: R-404A / R-23 Test chamber weight (approx.): 900 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced or fixed. 3. Refrigerant is filled with legally compliant Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: good (used), Functionality: fully functional, machine/vehicle number: 088829, measuring range X-axis: 800 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 600 mm, Zeiss CNC coordinate measuring machine UMC 850 Retrofit, last calibrated in 2017 Measuring range: X = 800 mm, Y = 1800 mm, Z = 600 mm 5-position probe changer magazine Calibration sphere Additional probe accessories Control with BP26 control panel Accuracy E0, MPE = 2.5+L/250 Technically and visually in very good condition Complete retrofit available upon request Immediately available Transport and commissioning available upon request. Cob Hbsul Uxco Rfqerb

Condition: used, In this offer you are purchasing a used dual-cutting laser "Spectra Pricision GL422N" Object of sale: 1 x Spectra Pricision GL422N with the following equipment: Crsb Hbjq Ht H Ij Rfqsb incl. transport case incl. hand-held and excavator receiver HL750 incl. RC402N radio remote control A total of 3 lasers are in stock. Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Mobile 7 axis measuring arm 2.5 (8ft) including optical sensor WM MLS 100 + accessories 3D measuring arm with tripod for geometrical measurements Completeness: Total, no damages, excellent condition, regularly calibrated, not contaminated Ceb Hbsv A Tl Te Rfqerb

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Showroom fully automatic camera measuring system METRIOS for measuring parts without the need for positioning for parts with a size of 300x200x80mm - measurable 265x200 mm, Measurement accuracy (5+0.01L[mm]) (μm) Creb Hb Rfewcnwcsqsb

Condition: excellent (used), White Type: SC / KWT - 1000 Technical data: Salt spray mist test MIN 5 K > Tu MAX +50°C Condensation water test MIN 5 K > Tu MAX +45°C Humidifier MIN 5 K > Tu MAX +75°C Temperature constancy The temperature deviation over time is ±1 K Dimension with hood: Test chamber: H 1190 mm x W 1650 mm x D 570 mm Ceb Hb Rferh Dmqsqsrb Dimensions without hood: Test area: H 740 mm x W 1650 mm x D 570 mm Dimensions with hood: Outside: H 1370 mm x W 2730 mm x D 800 mm Dimensions without hood: Outside: H 920 mm x W 2730 mm x D 800 mm Capacity approx. 700 - 1130 liters 3/N/PE AC 400V ±10%50Hz Rated power 4 KW Rated current 7.5 A Weight: 180 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2016, operating hours: 14,242 h, Condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Crsb Hjt Txqreb Rfqsb Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 500 mm, Equipment: type plate available, Eclipse 7/10/5 ST3 CNC Last calibration 03/2024 Technical specifications: Csb Hjvr Eb Sjb Rfqorb Measuring range X=700mm, Y=1000mm, Z=500mm Accuracy MPE U1=2.9/250 U3=3.4/250 C99 control system with control panel ST3 touch probe system Retrofit 2022 Equipment: 6-way probe magazine Probe change plate Calibration ball Probe accessories Wortmann WIN10/64-bit Pro computer for workstations Monitor Machine folder and documentation Software: CMMOS 7.2.08 SP2 USoft-Solid 4.3 Rev. A Conversion to Calypso possible without restrictions Conversion to VAST XXT possible at any time Delivered without the clamping system shown Immediately available

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Ceb Howak Nvjb Rfqerb Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Crjbsrm Riho Hb Rfqeb Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2016, operating hours: 9,195 h, Condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Creb Hbst Txtts Rfqob Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: refurbished (used), Functionality: fully functional, measuring range X-axis: 850 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 600 mm, Zeiss MC 850 VAST XT Gold Measuring range: X = 850 mm, Y = 1800 mm, Z = 600 mm Complete retrofit 2018 C99 control unit with BP26_SE control panel VAST XT Gold probe head MSR 13-position stylus magazine Calypso 2018 Basic CNC software Optional QS-Stat interface Upgrade to the latest Calypso version possible Calibration sphere Additional stylus accessories Creb Hb Rjvk Eafofqeb Technically and visually in excellent condition Immediately available

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Crob Hb Rjru Dzusfqsb Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss temperature test chamber with Thermofin external condenser Weiss WTS3-1000/70/5 air-cooled Test chamber dimensions: Height: 950 mm, width: 1100 mm, depth: 950 mm Test chamber external dimensions: Height 1995 mm, width: 1300 mm, depth: 2450 mm External condenser dimension: Height 1000 mm, width: 1250 mm, depth: 1610 mm Test chamber capacity: approx. 1000 liters Year of construction: 2012 Entry ports R1 and R2: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature change rate Heating 8.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 2.0 K Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 26,0 kW Rated current: 45,0 A Refrigerant: R-404A / R-23 T Crjb Hbst E Sd Nj Rfqeb est chamber weight: 955 kg Thermofin external condenser weight: 131 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced or fixed. 3. Refrigerant is filled with legally compliant Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 800 mm, ZEISS CNC coordinate measuring machine ACCURA II Measuring range: X = 900 mm, Y = 1800 mm, Z = 800 mm Year of manufacture: 2011 Last calibration: 04/2021 Technically and optically in excellent condition Length measurement error according to ISO 10360-2 for VAST XT Gold/VAST Gold/VAST XTR Gold: E0 = (1.9 + L/300) µm, PFTU = 1.9 µm Permissible reference temperature (held constant for 48 hours) selectable from 20-26°C, +-2 K Scanning performance according to ISO 10360-4 MPE_THP = 3.5 µm in 68 s Device features, equipment: Cjb Hbjr H Hbto Rfqjrb Gantry measuring machine with fixed table Glass-ceramic scales C99 control system with BP26_SE control panel Sensor technology VAST XT Multi-Sensor Rack MSR 12-way Automatic temperature compensation Calibration sphere Reference probe HP workstation with monitor Software: Calypso Basic Options: Calypso QDAS Converter Calypso upgrade and additional options available Exchange plate Various probe accessories Additional accessories and options available Further upgrades possible Available immediately

Condition: excellent (used), Heraeus Type: HA 2472 BS Cleanroom workbench for installation and operation in laboratories Interior dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Condition: used Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) Crsb Hbjvyd Adj Rfqjb We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Creb Hb Rfet E Sfgoqjb Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C without thermal test room touch Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Crjb Hbjvx S Hhs Rfqob Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Creb Hbjvx Sxds Rfqeb Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Cjb Hbsvx Su Sj Rfqsrb Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Perkin Elmer Type: Optima 7300 DV + S10 spectrometer The Optima 7300 DV represents the ultimate ICP-OES instrument in terms of optimizing performance and productivity. Can determine more than 73 elements in seconds Technical data: Wavelength range ultraviolet from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Crsbjhwmtks Hb Rfqeb Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Duel View (DV) allows axial or radial viewing of the plasma The PerkinElmer S10 autosampler is a computerized multi-purpose sampling system for AA, ICP-OES and ICP-MS. The autosampler automates the introduction of standards and samples for instrument calibration and sample analysis and extends the functions of the spectrometer to those of a fully automated analytical workstation. Furthermore, a PolyScience WhisperCool cooling unit is also included Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. Crsb Hbeg Iiqfj Rfqob The coordinate measuring machine for measuring large workpieces. Measuring machine Johansson Cordimatic 7000 with Renishaw Retrofit (control, rotary/swivel probe & probe exchange library) Johansson Cordimatic 7000 measuring machine with Renishaw PH10T rotary/swivel head Measuring range - 28" x 17" x 13.5" Granite table size - 42" x 28" x 8" Equipped with: Calculator Metrologic 1 joystick trailer controller Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 Controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: used, Leco LECO C230 CARBON ANALYZER Carbon analyzer C230 The LECO C230 carbon analyzer is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur sulfur content in metals, ores, ceramics and other inorganic inorganic materials. The C230 uses an induction furnace and measures carbon by infrared absorption. The infrared (IR) source consists of nichrome wire, which is heated by heated to 8500 °C by resistance heating. The IR source emits visible energy and all wavelengths of the infrared spectrum Carbon dioxide can be used for the description; the same principle applies to sulphur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. within the IR spectrum. Energy from the IR source is absorbed, when the gas flows through the cell, preventing it from reaching the IR detector. An IR cell is used both as a reference and for measurement. Total carbon in the form of carbon dioxide is detected continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell. established by passing oxygen through the cell to drive out residual atmospheric gases. Technical data: Gas required: Carrier gas: Oxygen 99.5 % pure, 40 psi Pneumatic gas: Compressed air, nitrogen or argon, 40 psi (2.76 bar), Source must be free of oil and water Gas flow (based on nominal analysis time) Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulator Oxygen: 501-291 O 2 pressure regulator Compressed air: 766-036 Compressed air regulator Inert gas: 764-216 Inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data transmission: Included Data storage Without PC: 10 sample weights, 50 responses, 5 methods Without PC: Internal membrane /External optional display Without PC: Liquid crystal (16 x 26 characters) Power requirement Determinator: 230 Ṽ̃̃, ± 10 %, 50/60 Hz, Single-phase, 15 amps max. Operating current: 12 A Standby current: 4 A Condition: gebraucht / used Scope of delivery: (see picture) Csb Hbsu Ndyxo Rfqjrb (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Ceb Hbsu S Ahqe Rfqsrb Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: