Condition: used, Functionality: fully functional, machine/vehicle number: 100 kN, Universal testing machine, vertical; hydraulic motor pump; electronic absolute pressure transducer. Force measuring range: 100 kN Fgsb Epsv Tm D Djzufsb Last calibration: 03/2023 Software: IBS TensileTest We are happy to answer any questions you may have.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C without thermal test room touch Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of Fgsb Esvx S Hhepzufob refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: used, Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, type of input current: AC, overall weight: 7 kg, outer dimension length: 223 mm, outer dimension width: 172 mm, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, The Datacolor® 200R delivers reliable and easy-to-use color measurements for paint and coating applications. The instrument is fully backward compatible with the existing Datacolor 110, making it a seamless complement or replacement. Designed specifically for use in paint retail, it features a compact, modern design for plug-and-play operation. Calibration is required less frequently, allowing for longer uptime. Thanks to the new service indicator light, you can have even greater confidence in your measurements. Confidence in Measurements Laboratory-Accurate Measurements Prevent Errors and Save Time and Money The Datacolor 200R utilizes the patented SP2000 spectral analyzer to provide paint retailers with laboratory-accurate color measurements. This enables paint retailers to achieve the same high-quality color matches expected from a color laboratory in their stores, saving time and money on color corrections. Spherical geometry with automatic gloss trap With the sphere geometry of the Datacolor 200R, color measurements can be performed on both smooth and textured samples. Automatic gloss compensation thus guarantees perfect color matching. Significantly reduced calibration frequency ensures longer uptime When customers are waiting in the salesroom, there simply isn't time to calibrate the instrument. Fgeb Epzujwff S Nsfsb The calibration of the Datacolor 200R is retained for up to two weeks, maximizing your shop's productivity without any loss of accuracy.

Condition: like new (used), Portable truck weighing scale Portable mounted on a chassis, bolted and removable. Capacity 60 MT Length 14 M Fgob Epzujmfqkhsfsb

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 500 mm, Equipment: type plate available, Eclipse 7/10/5 ST3 CNC Last calibration 03/2024 Technical specifications: Measuring range X=700mm, Y=1000mm, Z=500mm Accuracy MPE U1=2.9/250 U3=3.4/250 C99 control system with control panel ST3 touch probe system Retrofit 2022 Fob Epzovr Eb Sjufsgb Equipment: 6-way probe magazine Probe change plate Calibration ball Probe accessories Wortmann WIN10/64-bit Pro computer for workstations Monitor Machine folder and documentation Software: CMMOS 7.2.08 SP2 USoft-Solid 4.3 Rev. A Conversion to Calypso possible without restrictions Conversion to VAST XXT possible at any time Delivered without the clamping system shown Immediately available

Condition: excellent (used), Year of construction: 2018, Functionality: unexamined, Technical data: Machine type F135/F155 Measuring range Distance between C- and Z-axis 270 mm Maximum measurable diameter 320 mm Maximum measurable height 350/550 mm Maximum table load 25 kg Rotation axis (C-axis) Turntable diameter 150 mm Manual alignment of the workpiece Roundness deviation in the rotation plane. Table 0.03 µm + 0.0005 µm/mm Measured height *Roundness deviation in the plane of the rotary table 0.015 µm + 0.00025 µm/mm Measured height axial run-out error 0.04 µm + 0.0005 µm/mm Radius *axial run-out 0.02 µm + 0.00025 µm/mm Radius centering range +/- 2mm Inclination range +/- 0.6˚ Rotation speed 1-10 rpm Rotary bearing air Vertical axis (Z-axis) Effective height 350/550 mm Straightness deviation 0.15 µm/100 mm (0.3 µm/350 mm/0.4 µm/550 mm) Parallelism of the C and Z axis 0.8 µm/350 mm/1.3 µm/550 mm Anti-collision protection yes Horizontal axis (R-axis) Effective length 170 mm Fgjb Epzjuh Ufasufeb Dimensions Length 700 mm Width 410 mm Height 950 mm Weight approx. 185 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Mobile 7 axis measuring arm 2.5 (8ft) including optical sensor WM MLS 100 + accessories 3D measuring arm with tripod for geometrical measurements Completeness: Total, no damages, excellent condition, regularly calibrated, not contaminated Fgeb Epzov A Tl Toufeb

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Fob Epzujvx Sxdsfegb

Condition: excellent (used), Weiss temperature test chamber with external condenser Weiss WT3-1000/70 air-cooled Test chamber dimensions: Height: 950 mm, width: 1100 mm, depth: 950 mm Test chamber external dimensions: Height 1995 mm, width: 1300 mm, depth: 2450 mm Test chamber capacity: approx. 1000 liters Operational hours: 7274 h Year of construction: 2012 Entry ports: R1 and R2: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature change rate Heating 4.0 K/min Cooling 2.5 K/min Heat compensation at 20°C max. 3000 W Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Fgob Est E Sd Ajpzufjb Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,8 kW Rated current: 29,0 A Refrigerant: R-404A / R-23 Test chamber weight (approx.): 900 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced or fixed. 3. Refrigerant is filled with legally compliant Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved. Fgeb Epowak Nvjzufob

Condition: refurbished (used), Functionality: fully functional, measuring range X-axis: 850 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 600 mm, Zeiss MC 850 VAST XT Gold Measuring range: X = 850 mm, Y = 1800 mm, Z = 600 mm Complete retrofit 2018 C99 control unit with BP26_SE control panel VAST XT Gold probe head MSR 13-position stylus magazine Calypso 2018 Basic CNC software Fgebjvk Eafe Epzufeb Optional QS-Stat interface Upgrade to the latest Calypso version possible Calibration sphere Additional stylus accessories Technically and visually in excellent condition Immediately available

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Showroom fully automatic camera measuring system METRIOS for measuring parts without the need for positioning for parts with a size of 300x200x80mm - measurable 265x200 mm, Fgeb Epowcnwcezufob Measurement accuracy (5+0.01L[mm]) (μm)

Condition: excellent (used), Year of construction: 2012, Coordinate measuring machine for inline and prduction use from Mitutoyo in good condition, built 2012, installed 2014 Controller Mitutoyo UC240, Probe Renishaw PH10MQ/TP7, Software Mitutoyo MCOSMOS-1 V3.5 Measuring ranges: X – axis 905 mm Y – axis 1005 mm Z – axis 605 mm Accuracy acc. ISO 10360 MPEE = [2,5 + 3,5L/1000] µm at temperature range 18… 22 °C Base material Steel fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale Resolution 0,0001 mm Fgsb Epzuoh Nu Uhsfsb DC motores with encoders Guideways linear guides Probe Renishaw PH10MQ with PHC10-2 plus (used) Probe Renishaw TP7 optional with ACR-3 (used) Computer Workstation WIN 10 (used) or equipment on demand e.g. upgrade to Renishaw scanning probe Installation and Calibration € 5.000,-- plus travel expenses On demand: - SP25M + FCR rack instead of TP7 ( + € 12.000,--) - Upgrade PH10MQplus (€ 8.000,--)

Condition: used, SincoTec Fob Epzevx Su Sjufegb Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2016, operating hours: 14,242 h, Condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Fgob Ejt Txqrepzufeb Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), Perkin Elmer Febshwmtko Epzufegb Type: Optima 7300 DV + S10 spectrometer The Optima 7300 DV represents the ultimate ICP-OES instrument in terms of optimizing performance and productivity. Can determine more than 73 elements in seconds Technical data: Wavelength range ultraviolet from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Duel View (DV) allows axial or radial viewing of the plasma The PerkinElmer S10 autosampler is a computerized multi-purpose sampling system for AA, ICP-OES and ICP-MS. The autosampler automates the introduction of standards and samples for instrument calibration and sample analysis and extends the functions of the spectrometer to those of a fully automated analytical workstation. Furthermore, a PolyScience WhisperCool cooling unit is also included Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2016, operating hours: 9,195 h, Condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm Feb Epzjt Txttjufogb L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. The coordinate measuring machine for measuring large workpieces. Measuring machine Johansson Cordimatic 7000 with Renishaw Retrofit (control, rotary/swivel probe & probe exchange library) Johansson Cordimatic 7000 measuring machine with Renishaw PH10T rotary/swivel head Measuring range - 28" x 17" x 13.5" Granite table size - 42" x 28" x 8" Equipped with: Calculator Feb Epzog Iiqfeufogb Metrologic 1 joystick trailer controller Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 Controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature test chamber with Thermofin external condenser Weiss WTS3-1000/70/5 air-cooled Test chamber dimensions: Height: 950 mm, width: 1100 mm, depth: 950 mm Test chamber external dimensions: Height 1995 mm, width: 1300 mm, depth: 2450 mm External condenser dimension: Height 1000 mm, width: 1250 mm, depth: 1610 mm Test chamber capacity: approx. 1000 liters Year of construction: 2012 Entry ports R1 and R2: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature change rate Fjb Epzuet E Sd Njfsgb Heating 8.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 2.0 K Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 26,0 kW Rated current: 45,0 A Refrigerant: R-404A / R-23 T est chamber weight: 955 kg Thermofin external condenser weight: 131 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced or fixed. 3. Refrigerant is filled with legally compliant Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: used, Leco LECO C230 CARBON ANALYZER Carbon analyzer C230 The LECO C230 carbon analyzer is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur sulfur content in metals, ores, ceramics and other inorganic inorganic materials. The C230 uses an induction furnace and measures carbon by infrared absorption. The infrared (IR) source consists of nichrome wire, which is heated by heated to 8500 °C by resistance heating. The IR source emits visible energy and all wavelengths of the infrared spectrum Carbon dioxide can be used for the description; the same principle applies to sulphur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. within the IR spectrum. Energy from the IR source is absorbed, when the gas flows through the cell, preventing it from reaching the IR detector. An IR cell is used both as a reference and for measurement. Total carbon in the form of carbon dioxide is detected continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell. established by passing oxygen through the cell to drive out residual atmospheric gases. Technical data: Gas required: Carrier gas: Oxygen 99.5 % pure, 40 psi Pneumatic gas: Compressed air, nitrogen or argon, 40 psi (2.76 bar), Source must be free of oil and water Gas flow (based on nominal analysis time) Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulator Oxygen: 501-291 O 2 pressure regulator Compressed air: 766-036 Compressed air regulator Inert gas: 764-216 Inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data transmission: Included Data storage Without PC: 10 sample weights, 50 responses, 5 methods Fsb Epzju Ndyxsufegb Without PC: Internal membrane /External optional display Without PC: Liquid crystal (16 x 26 characters) Power requirement Determinator: 230 Ṽ̃̃, ± 10 %, 50/60 Hz, Single-phase, 15 amps max. Operating current: 12 A Standby current: 4 A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Fgob Epot E Sfgozufsb Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: Fsb Epzeu S Ahqeufogb

Condition: excellent (used), White Type: WK 27'/50-150 Climate cabinet Water-cooled Technical data: Test cabinet designation: WK 27'/50-150 External dimensions Height 3500 mm, width 3400 mm, depth 6000 mm Control cabinet dimensions Height 2000 mm, width 2400 mm, depth 400 mm Internal dimensions Height 3000 mm, width 3000 mm, depth 3000 mm Floor load 30000 N/m³ (surface load) Test chamber volume: approx. 27000 liters Test specimen mass 1000 kg Fob Eevx Nfbjpzufjgb Cold / heat operation -50°C to 150°C Heating 1.0 K/min Cooling 1.0 K/min Temperature stability +- 0.3 to 1.0 K (time-related) Temperature stability +- 0.1 to 0.5 K (time-related) Air conditioning operation 10 – 90°C Humidity 10...98% r.h. Temperature stability +- 0.1 to 0.5 K (time-related) Dew point range +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants R23 and R404A With extra floor plates to increase floor load The following information is for your safety as a buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Binder Type: MK 720 Environmental simulation cabinet for cyclic temperature tests. The Binder cabinet of the MK series is suitable for all heat and cold tests between -40°C and 180°C. The natural simulation through the APT.line preheating chamber technology is particularly unique. It is a clever alternative to complex individual solutions for cyclic temperature tests. External dimensions: width: 1340 mm, height 2100 mm Depth plus 50 mm controller and door handle 1230 mm Distance from wall 160 mm Viewing window width 370 mm Viewing window height 770 mm Number of doors 1 Internal dimensions: width: 1000 mm, height: 1168 mm, depth: 600 mm Fsb Epzuovx Ndwofsgb Interior volume 720 liters No. Slots 5 Load per slot 40kg Permissible total load 120kg Empty weight 570kg Temperature range -40°C to 180°C Electrical data Nominal voltage 400 V 3 N ~ 50/60 Hz Nominal power 6.0 kW 14.5 A Calibration certificate here 12/19/2023 Refrigerant: R404 A Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick / Roell Zwick Indentec hardness tester Type: 4150DLC-A Technical data: Available test forces 60, 100 and 150 kgf Power supply 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Condition: used Weight approx. 60kg Scope of delivery: (See image) Fgjb Eovxrxdspzufob (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.