Condition: excellent (used), RS Simulators TEE160/LN2(40)S Zwick / Roell Temperature chamber for AllroundLine Temp. -40°C to + 160°C All our equipment is tested by qualified technicians and, if necessary, adapted to meet regulatory requirements, so that carefree operation within the framework of legal requirements is guaranteed. Dsljfi Ti Njn Er N Rskl

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Doln Erer Igwne N Rskl Type: MICROSPEED 10 Year 2007 Measuring machine control cabinet with remote control.

Condition: used, Year of construction: 2000, type of input current: three-phase, 1 dosing scale for bulk materials. Most recently used for limestone powder. Container: stainless steel Discharge via screw conveyor Doln Erjv T T H Sj N Rskl

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,200 mm, measuring range Z-axis: 1,000 mm, All the information is in the documents. Delnovy Aldo Er N Rokl Video of the machine working available on request

Condition: excellent (used), Keyence Type: VHX-6000 Image sensor: 1/1.8-inch CMOS imager Virtual pixels: 1600 (H) × 1200 (V) Scanning system: Full frame method Frame rate: 50 fps (max.) Resolution 2 million pixels: 1600 (H) × 1200 (V), approx. 1000 TV lines 2 million pixels*1*3: 1600 (H) × 1200 (V), approx. 1200 TV lines (2 million pixels x 3 CMOS mode, excellent color fidelity) 8 million pixels*3: 3200 (H) × 2400 (V), approx. 1600 TV lines 18 million pixels*3: 4800 (H) × 3600 (V), approx. 2000 TV lines or more 18 million pixels*2*3: 4800 (H) × 3600 (V), approx. 2000 TV lines or more (18 million pixels × 3 CMOS mode, excellent color fidelity) Electronic shutter: Auto, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.02 to 4 sec White balance: Button setting, Auto, Manual, Preset (2700K, 3200K, 5600K, 9000K) Dolnsg Smy De Er N Rekl Rear focus adjustment: Not required LCD monitor*5 Size: Color LCD (IPS), 23 inch Screen size: 509.184 (H) × 286.416 (V) mm Pixel pitch: 0.2652 (H) × 0.2652 (V) mm Number of pixels: 1920 (H) × 1080 (V) (FHD) Display colors: Approx. 16770000 colors*4 Brightness: 300 cd/m2 (Center, 1 dot, typical) Power supply Supply voltage: 100 to 240 V AC, 50/60 Hz Power consumption: 280 VA Environmental resistance Ambient temperature: +5 to +40°C Ambient humidity: 35 to 80% RH (no condensation) Weight Control unit: Approx. 12.5 kg Camera unit: Approx. 1.2 kg (VHX-6100/6020) Console: Approx. 0.5 kg Dimensions (excluding protruding surfaces): 550 (W) × 470 (H) × 200 (D) (when stored) XYθ stage VHX-S660E XY stage: Electric/Manual: Electric Motor on XY motorized stage: Two-phase stepping motor Resolution on XY motorized stage: 1 μm (typ.) Positioning speed of XY motorized stage: 20 mm/s (max.) Travel distance of XY stage: ±50 mm θ rotation angle: – Size of XYθ stage: Surface: 233 × 185 mm (middle disk: ø168) Magnification compatible with transmitted light: 20× or higher Z-axis: Electric/Manual: Electric Motor on motor-driven Z-axis: Five-phase stepper motor Resolution on motor-driven Z-axis: 0.1 μm (typ.) Positioning speed on motor-driven Z-axis: 17 mm/s (max.) Z-axis travel: 49 mm Ratings Supply voltage: 100 to 240 V AC, 50/60 Hz Power consumption: 60 VA Environmental resistance Ambient temperature: +5 to +40°C Ambient humidity 35 to 80% RH (no condensation) Weight: Approx. 20 kg Load capacity: 5 kg Within a magnification range of 0.1× to 50× working distance of 95 mm as well as easy handling and high performance. Universal zoom lens VH-Z20R/Z20T The VH-Z20R/Z20T enables high-resolution viewing at standard magnifications of 20× to 200×. With a working distance of 4.4 mm, it offers magnifications down to the submicrometer range. Magnification 500x to 5000x. Year of manufacture: 2018 Sold from location! Condition: used Scope of delivery: (As shown) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, TECHNICAL DETAILS FP2 Mobility Pack: Included Measurement software: Delcam PowerINSPECT11 with dongle (no runtime limit) Laptop: Dell 6600 with 17-inch 1920x1080 monitor – NVIDIA Quadro 3000M graphics Tripod: Brunson heavy-duty rolling tripod type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volume accuracy: ±0.029 mm Arm weight: 8 kg Stylus set: Stylus with 3 mm and 6 mm ruby balls, and with 15 mm steel balls EQUIPMENT - Carbon fiber twin-tube construction allows for the separation of stability and measurement - AbsoluteArm Series can begin measuring directly without moving to a reference point - Touch probe system with automatic probe recognition Dsln Eov Tlrtsr N Rskl - Mounting plate with magnets - Complies with B89.4.22 - FP2 Mobility Pack - Carrying case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable for measuring arm and notebook - Dust cover - New pressure cylinder is installed - Relabeling of the measuring arm before calibration in 2023 - ISO 10360 acceptance with 2023 certificate is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling stand - i.e. 3 parts - For pickup by the buyer via a freight forwarder, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, packed with bubble wrap inside) and a Euro pallet (Brunson rolling stand) for €180, secured on the pallet with packing straps.

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, Hexagon Absolute Arm 8020 including laser scanner, Dell laptop, Inspire software & vacuum plate – as good as new! 📍 Delivery date: December 21, 2022 📍 Condition: As good as new 📍 New price: approx. €88,500 Includes accessories: ✅ Laser scanner for high-precision 3D measurements ✅ Inspire software for professional analysis & processing ✅ Vacuum plate (Witte) ✅ Powerful Dell laptop with the following specifications: Dksln Esv Eaa Njr N Rsl Processor: 12th Gen Intel® Core™ i7-12850HX (2.10 GHz) RAM: 64 GB System: 64-bit operating system, x64-based processor Touchscreen with 10-point touch input We are selling a Hexagon Absolute Arm 8020, a high-precision and powerful measuring system for industrial applications. The arm was delivered on December 21, 2022 and is in as good as new condition with only minimal use. 📩 Interested or have questions? Just get in touch!

Year of construction: 2012, Condition: excellent (used), Coord3 Hera coordinate measuring machine in top condition Measuring Ranges X – axis 900 mm Y – axis 2000 mm Z – axis 800 mm Accuracy acc. ISO 10360 E = [2,5 + 4L/1000]µm Pantec Eagle Pro Probe system Renishaw PH10MQ+SP25M Dkolnslmlhws Er N Rel Probe changer Renishaw FCR25 Inspect3D Inca V7 (latest Version) Computer Hewlett Packard (Windows 11 Pro) Dual Monitor On demand with old PC (W7) and old Arco CAD license (minus € 5.000,--)

Condition: good (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 35018, Equipment: documentation/manual, We are selling our Jenoptik Hommel T8000 surface roughness measuring device. The device has been used in the measurement laboratory, regularly serviced, and calibrated. It is in very good condition, fully functional, and ready for use. Technical details are available upon request, and the measuring device can be inspected on-site. Djln Eowcwgyor N Rokl

Condition: excellent (used), Digimar 817 CLM Height Gauge Doln Er Nov Rvyvj Rokl Measuring range: 0 - 600 mm 0.01 mm, 0.005 mm, 0.001 mm, 0.0005 mm, 0.0001 mm / 0.001 inch, 0.0005 inch, 0.0001 inch, 0.00005 inch, 0.00001 inch Error limit _µm: Data interface: USB, RS232C, Wireless

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 300 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 300 mm, overall weight: 8,000 kg, input voltage: 230 V, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 300 mm, compressed air connection: 5 bar, year of last overhaul: 2024, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Reference measuring device Mahr OMS 1000 Multisensor The all-round measuring device for the widest range of parts Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring accuracy: E1= 1.3 + L / 400µm E2= 0.9 + L/600µm E3= 2.2 + L/300 µm Measuring range: approx. 1000x1000x350mm including optical sensor (camera & laser) Renishaw TP200 touch probe including standard force module CNC control incl. manual control panel 27 inch flat screen monitor Evaluation station incl. Windows 10 operating system) Djljhmfb Sen Er N Rskl New Opticheck 3D 5.0 ​​software active vibration damping (pneumatic) also for production-related measurements Optical sensor: • Pure gray value image processing • Fast digital image processor • Automatic feature and edge filter • Error documentation through program-controlled saving of the video image • Multifunctional multi-window technology • white, telecentric transmitted light • coaxial incident light • 3D multi-sensor head Laser sensor: Laser preparation for laser autofocus. Software intensity control to adapt to different materials. Software: • User-friendly, interactive programming • symbolic representation of the program structure • 32-bit multitasking enables parallel measurement and evaluation • Powerful basic editor for customer-specific programs • automatic sensor calibration • Geometry elements: point, straight line, circle (enveloping, compensating and inscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Shape & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, squareness, inclination, position, symmetry, concentricity, concentricity, total concentricity, axial runout, total axial runout • Maximum Material Principle (MMC) • Current tolerance tables of common DIN standards • Software module for creating any factory tolerance table

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, Used coordinate measuring machine Karl Zeiss CMM CONTURA 7/10/6 active Year of manufacture 2002 Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Dkelnsvzltge Er N Rel Technical description in PDF The machine was brought up to date when purchased in 2017, CMG overhauled, control panel retrofitted (not standard for this year of manufacture) Control: Calypso 2019 The machine was serviced and maintained annually with the maintenance/service contract, then re-measured with a test sticker! The machine is still powered and can be viewed in the Wels area in Austria by arrangement. The buyer takes care of transport. Technical data, accessories and description of the machine are non-binding

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, warranty duration: 12 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, workpiece weight (max.): 100 kg, !!! Used systems can also be financed through Leasing GmbH !!! Incl. training Contour measuring system with feed unit and motorized Z-column Djln Erjq Nzd Ne N Rokl Scope of delivery: - CV120 feed unit motorized with precision guide - External control and regulation unit - Z-column motorized - Evaluation computer desktop version W11/64 bit - 24" TFT monitor - ConturoMatic evaluation software; operating manual - Cable set - CM software updates FREE OF CHARGE!!! Technical data CV120: Feed unit (X/Z measuring axis) - Z measuring range: 30mm - X measuring range: 120mm - Measuring speed: 0.1-1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe arm lifting function Z-column - Positioning range: 320mm, motorized Accuracy: X-axis +/-(1.2µm+2Lx/25)µm* [L=mm] Z-axis +/-(1.8µm+2Lz/25)µm* [L=mm] Note: Various accessories are available as options to adapt our CV120 to the required measuring tasks and to expand the system. Aluminum or granite base plate, Y-R adjustment table, probe arms, joystick, calibration standard, part holders, etc. * according to specification T&S/CV120 -Technical changes reserved- Tariff number: 90318020 -1 year guarantee- Photos contain special accessories that are not included in the standard scope of delivery.

Condition: repair required (used), Functionality: unexamined, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, Measuring range appx. 500x400x300 - with computer, but without software and probe Dksln Eevmd Rujr N Rol - incl. DCC controller (probably working) - was equiped with PH10M and SP25M for spares or retrofit only

Condition: like new (used), Binder MKF 400 E5 climate chamber for sale. The chamber is like new. Manufacturer's description: PRODUCT DESCRIPTION The MKF series environmental simulation chamber from BINDER is ideal for all cold and heat tests carried out on the basis of recognized temperature and climate test standards in accordance with DIN and IEC standards. High operating comfort and extensive standard equipment have obvious advantages in everyday use. MOST IMPORTANT FEATURES Temperature range: -40 ° C to 180 ° C Humidity range: from 10 to 98% relative humidity Integrated 20 L water tank 4 potential-free relay connections APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostic system with optical and acoustic alarm Intuitive touchscreen controller with time interval programming and real-time programming Internal data logger, measured values in open format can be read via USB Dkslnjwb U Hne Er N Rol Access port with 50 mm silicone plug, left side Independent, adjustable temperature protection class 2 (DIN 12880) with optical alarm 4 castors, two with brakes Interface for PC connection: Ethernet Ramp function can be set Integrated line recorder Time clock actual Door heating Alarm message in the event of lack of water in the fresh water tank 1 stainless steel wire shelf Protection against leaking hoses, covering the water supply and discharge pipes up to a height of 1 m Stainless steel interior Halogen-free refrigerant R-452A Cooling provided by a compressor unit

Condition: good (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 70357, Equipment: documentation/manual, We are selling our Jenoptik Hommel C8000 surface contour measuring device. The device has been used in the measurement laboratory, regularly serviced, and calibrated. It is in very good condition and ready for use. Technical details are available upon request, and the measuring device can be inspected on-site. Doln Eswcpl Ijr N Rjkl

Condition: like new (used), Milwaukee inspection camera M12 ICAV3 with battery and charging station Dkjln Esv Hbq Sjr N Rel

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Used machine - Mitutoyo Crysta Apex V776 Here I am offering a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine was built in 2020. The machine was only used in an air-conditioned measuring room. This is a TOP-equipped machine that you can get started with right away! We can of course offer you transport, assembly and commissioning as well as calibration (factory or DAkkS) so that you don't have to worry about the individual things! The machine equipment can be adapted to your wishes after consultation. The machines usually have a rotating and swiveling head with the corresponding button and modules. A change rack can be offered if this is not already included. We can of course also offer you an upgrade of the software. Specifications see PDF or picture. Dkoln Er Nsv Dg Tgo Rsl Leasing on request. (All prices are net plus VAT.)

Condition: new, warranty duration: 24 months, measuring range X-axis: 300 mm, measuring range Z-axis: 370 mm, overall weight: 95 kg, Modular extensible Contour measuring system Anytime optionally via software updatable functions: - up-down-directions Z-Scanning - option Roughness measurement - motorized Y-Supporting table - axis of rotation for contour and roughness Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - PC W11/64Bit; 24"TFT flat screen; - CunturoMatic Software; user manual Dsln Er Negr Uzcj Rskl - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - Protective cover 8988, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of lead deviation - Thread testing etc. Technical data contour measurement: X-Measuring range 300mm Z-Measuring range 375mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0.9µm+L/100)µm* [L=mm] Measuring speed 0.1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Technical data roughness measurement: Diamond tip Cone 60° R=2µm Z-Measuring range +/-500 µm Scope Ra > 0.08µm | Rz> 0.8µm Probing force 7.5mN Measuring speed 0.1mm/s * According to our specified terms- Subject to change without notice without fixing system

Condition: used, mytron Type: T2240 Temperature cabinet, water-cooled Technical data: External dimensions: width 1435 mm, height 1955 mm, depth 2590 mm Dimensions of the test chamber: width 1050 mm, height 1400 mm, depth 1600 mm Volume of the test chamber: approx. 2240 l Opening for cables: Dolovtl Hqsn Er N Rekl 2 x 100 mm right 2 x 100 mm left Temperature range: – 40 °C to + 100 °C at 23 °C room temperature Temperature stability over time: +/- 0.5 °K Temperature stability over space: +/- 1.0 °K Cooling: water cooling, Inlet and outlet 1" internal thread Cooling water shut off by solenoid valve when device is OFF Fault display in the event of a refrigeration machine error Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Drain temperature approx. 22 °C (with continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuse protection: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right side of the test room Exhaust air connection: DN 100 mm plug-in system Safety device: electronic overtemperature protection, permanently set Flue gas monitoring with horn Viewing window: five-pane glazing 130 x 360 mm Refrigerant: R 404 A approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Complete drum drying system with an evaporation capacity of 12 t water/h Including material feed + Multi-cyclone separator Dkoletrdrkon Er N Rjl + Suction fan + Chimney + Hay cooler with filter + Pellet cooler + 2 balers + Belts, augers, elevator, etc. The chipper and roller press have already been sold. However, we would be happy to assist you with the purchase of replacements. We would be happy to send you more detailed information on the individual systems. Please also see our other listings. Individual sales possible upon request. Prices are net, negotiable no guarantee of availability

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Used machine - Mitutoyo Crysta Apex C776 Here I am offering a very well-maintained 3D coordinate measuring machine from the manufacturer Mitutoyo. The machine was built in 2005. The machine was only used in an air-conditioned measuring room. This is a TOP-equipped machine that you can start using straight away! We can of course offer you transport, assembly and commissioning as well as calibration (factory or DAkkS) so that you don't have to worry about the individual things! The machine equipment can be adapted to your wishes after consultation. The machines usually have a rotating and swivel head with the corresponding button and modules. A change rack can be offered if this is not already included. We can of course also offer you an upgrade of the software. Dkeln Ersv Dg Taj N Rsl See PDF or picture for specifications. Leasing on request. (All prices are net plus VAT.)

Condition: refurbished (used), warranty duration: 12 months, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, Contur measuring system with "2 x-directions measuring function" in accordance with attached description Measuring range 250x320mm Scope of supply: Mechanics completely with Y-Shifting table integrated control unit probe arm 6829-02/2 150/20.5 (25µm ceramic) probe arm 6829-08/2 150/2x5 (25µm ceramic) PC, operating system MS Windows 10 ConturoMatic Software 24"TFT flat screen monitor, Dkeln Er Nepgnqpe Rjl -Optional roughness measurement can be expanded!!! The accessories shown are not part of the offer test, but can be offered additionally. -Subject to prior sale-

Condition: excellent (used), Year of construction: 2012, Used machine - Mitutoyo Crysta Plus M544 Here I am offering a very well-maintained 3D coordinate measuring machine from the manufacturer Mitutoyo. The machine was built in 2012. The machine was only used in an air-conditioned measuring room. This is a TOP-equipped machine that you can start using straight away! We can of course offer you transport, assembly and commissioning as well as calibration (factory or DAkkS) so that you don't have to worry about the individual things! The machine equipment can be adapted to your wishes after consultation. See PDF or picture for specifications. Leasing on request. (All prices are net plus VAT.) Dkoln Erov Dg Spe N Rsl

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Dkeln Eevpdhxjr N Rjl Specifications see attached PDF. Leasing possible. (All prices are NET)