Year of construction: 1999, Condition: used, weight 70 kg length 1840 mm length 2240 mm +++++ Please note: Fob E Sbshm Ubvo U Aegb The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Hardness tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Fgjb E Sou T Na Nsb U Aob Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Space requirement approx.: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

Condition: as good as new (ex-display), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: RA-7535, measuring range X-axis: 1,750 mm, Very neat measuring arm of the brand Romer Hexagon. With a measuring range of 3500mm and an accuracy of < 0.06mm, this measuring arm in combination with PolyWorks software is a very easy system with which you can go for years to make accurate measurements. Fsb E Sb Usu Hqfpe Asgb

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 08066766, Virtek LaserQC® with Vision Quality System is a rapid inspection system that uses lasers to measure the accuracy of two-dimensional parts within 0.05 mm (0.002 inches) or three-dimensional parts within 0.25 mm (0.010 inches). Contactless measurement. The laser captures over 500 control points per second, enabling the fastest quality inspection. Maximum scan area 1220mm x 1220mm Easy to use with one-click software. Machine dimensions: 2007mm x 1651mm x 2440mm 240V/50 Hz Laser: Class 2, meeting the 60825-1:2014 (3rd Ed.), standard for CE certification in Europe More information available on request Fjb Ejv Erkgj Sb U Asgb

Condition: used, Additional specifications: Verification accreditation: Since 2023 Surface plates included: 3 units (dimensions: 3 m × 5 m) Measuring and control equipment: Included Fgeb E Sovy Ey Dsb U Ajb

Condition: good (used), Year of construction: 2008, Functionality: limited functionality, Measuring range 400x400x200 Fsb E Sslmlkkeb U Aegb - Zoomlens - LED ringlight - LED stage light - LED coaxial light Probe: - Renishaw SP25M Software - Windows XP - Winwerth machine and PC are working but Software must be installed new, no software media available

Year of construction: 1992, Condition: used, x-travel 1400 mm Fgjboftfczo E Sb U Asb y-travel 1200 mm z-travel 1000 mm Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,5 x 2 m

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 15 h, Functionality: fully functional, machine/vehicle number: 7530SEI-3339-UC, measuring range X-axis: 3,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, 7 axis probing and scanning measuring arm with integrated LASER scanner. Good as new. Very little used. Come in the original case. Feb E Sbjtn Rkxo U Asgb

Condition: used, Angelantoni Challenge 600 Fgsb E Sb Ustw Exxo Aeb

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: U26017LR1597, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Equipment: documentation/manual, type plate available, 1.2 * Info: Used 3D coordinate measuring machine in very good condition from our own GROB quality assurance. Recorded annual maintenance carried out by HEXAGON New TÜV (02/2025) Travel paths: X-axis = 1,500 Y-axis = 900 Z-axis = 700 Description: Fgjb Ejv Ha Atj Sb U Aeb - Leitz Reference HP 15.9.7 - Leitz control panel with potentiometer - Leitz control panel stand - Passive damping system - Leitz measuring head LSP-S2 Scan+ - Probe changing device HR-XS-900, S2, X5 - 9x probe holder HR-XP-P - Calibration ball - Technical device documentation

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Optical wave scanner Tesa Scan 52 - Precision from Switzerland Touch probe: TESA Micro-hite 3D DUAL 454 Year of manufacture 2014 Fsb Eotudfto Sb U Aogb Measuring device for e.g. turned or milled components, shafts, threads, etc. * Including PC, programs and accessories * Regularly serviced, year of manufacture 2014 * Folders and CD's available * Condition as good as new, see pictures This measuring device has actually only been used very rarely. The new price was approx. 40,000 euros _____ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, Equipment: documentation/manual, Optical 3D coordinate measuring machine, manufacturer Keyence Model series VL 550 / VL 570 with few operating hours. - Basic device VL-550 - Measuring head VL-570 - Control unit VL-500 Some technical data on the measuring device: Display resolution: 0.1µm Repeatability: 2µm Measuring accuracy: ± 10µm in accordance with VDI/VDE 2634 Bl.3 Standard measuring mode: 4 million measuring points Fgsb E Sb Usr Epxpe Aob Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Scope of delivery: - 500mm base VL-550 - Measuring head VL-570 - Control unit VL-500 - cover - Calibration plate - User manuals - Certificates from the manufacturer - Shape and position tolerance module (software CD) - Comparison measurement module (software CD) - Alternating current cable Further technical data is available on request.

Condition: new, Still new in packaging. Purchase price was 1000€. Fsbjvblr Ao E Sb U Aogb

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, measuring range X-axis: 460 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 420 mm, workpiece weight (max.): 100 kg, total height: 2,380 mm, type of input current: AC, total width: 1,030 mm, total length: 14,000 mm, overall weight: 200 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): 13 °C, operating temperature: 20 °C, pressure: 4 bar, Manual 3D measuring machine with Reflex control panel for measuring complex geometry, such as distance, angle, position, squareness, concentricity, parallelism, etc. Accuracy 0.003mm or better. Requires compressed air. Without under-table. You need a stable workbench or similar. Fgob Eovq I Sdo Sb U Ajb

Year of construction: 2012, Condition: used, Functionality: fully functional, machine/vehicle number: 3703/13, Feutron Climate Chamber. Kenn-Nr 3703/13 Fgjbetw Ewue E Sb U Aeb Reg-nr 087 Year of construction 2012 Door is damaged (paint damage)

Condition: good (used), Used hardness tester DuraScan 20 G4 for Vickers, Knoop and Brinell for standard testing according to EN ISO and ASTM Torsion-resistant cast aluminum base body, granite base plate with vibration-damping feet for main load range 10 g - 62.5 kg (0.098 - 613.16 N) Motorized linear Z-axis, travel 235 mm Manual cross slide with analog micrometer spindles, travel 25 x 25 mm - WIN10 PC - new Fjb E Sorpmtrsb U Aegb - new CPU - new power supply - motorized turret - incl. Vickers indenter - incl. 10x lens - incl. 40x lens - incl. 60x lens

Year of construction: 2023, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: SNO: 2538870002, All information and content are provided without guarantee. Errors and changes excepted. We reserve the right to change, update, revise, or delete data at any time. Sale exclusively to commercial customers. Other devices are also available! Fjb Eov N Hbhj Sb U Ajgb

Year of construction: 2018, Condition: good (used), Functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, Fgjb E Set Rg H Asb U Aob with, incl. 1.5m connection cable incl. calibration certificate

Condition: good (used), Memmert VO 400 + PM 400 Vacuum drying oven up to 200°C with pump module Fsbovit Emo E Sb U Aegb

Year of construction: 2019, Condition: good (used), The sample material is weighed and placed into a sample tray. The sample tray itself is part of an integrated reactor within the HydroTracer. A heater warms the sample – temperatures between 50 °C and 210 °C are freely selectable. The water evaporating from the sample reacts with the reagent in a cooled area and water is transformed into hydrogen. Other volatile substances will condense at the cooled surfaces within the vessel. The concentration of hydrogen gas is measured. It is a measure for the amount of water in the reactor. Fgjb E Sbek Nzvvs U Aeb The concentration of hydrogen is a measure of the sample humidity. The percentage of water of the sample is calculated by division with the sample weight. The HydroTracer is controlled via a PC program. The program gives the user precise instructions so that operational errors are largely eliminated. The measurement is simple and requires only a few steps, each measurement is needed about 2 minutes of working time. The operation is supported by image-assisted program instructions. This method shortens the training period considerably. In principle, even an inexperienced user will be able to perform an accurate measurement. Test Time:10 – 45 Minutes Test Temperature:50 – 210°C (adjustable in 1°C steps) Sample Weight:0.01 – 50 g Reagent:CaH2-Pads / CaH2 granular form Measuring Range:0.2 – 25 mg (absolute)0.0005 – 5% (relative) Accuracy:Measuring error < 2% Resolution:1 ppm (0.0001%) 0.1 – 0.8 mg (depending on measuring range) Ambient Conditions:-10…40°C / 90% rH (not condensing) Power Supply:100 – 240 VAC (50/60 Hz) / 1000 W Weight:6.4 kg Dimensions:290 x 180 x 260 mm (H x W x D) Interface:USB System Requirements:PC with min. WIN 9-10-11 SP 1 or later

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Fjb E Sb Ueq Ruw No Aegb Power supply: 220/240VAC

Year of construction: 2024, operating hours: 4 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm Fgjb E Sjmdn Treb U Aeb max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2024, Condition: new, Universal testing machine H 5 TMNI ( L ) 250mm Extended mechanical construction: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, rigidity 9.4 kN/mm 1 work area up to nominal load: Fgsbsiq Hxve E Sb U Aob Working area width: 420 mm max. test stroke without test tools, adapter and KMZ: 1270 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1325mm Travel speeds: Test speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) in accordance with DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is carried out at the installation site at the customer's request, this must be charged separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of traverse position Resolution of the crosshead travel measurement:

Year of construction: 2024, Condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: Fsb Eoiq Hxko Sb U Asgb One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Year of construction: 2024, Condition: new, Universal testing machine H50TMCI / 900 Watt Fjb E Seiq Hxcob U Aogb mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement: