Year of construction: 1987, Condition: ready for operation (used), Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible. Dcjlinfsqv Et Seq Reg

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: Model # 5413-2777, Torque test bench Schatz / Kistler max torque 50Nm with many accessories Dcsleu S Apzoinfq Rsg

Condition: used, Electronic Temperature Calibrator, Temperature Calibrator Calibration Thermostat, Temperature Bath JULABO Type 8K-SE-C .: 10100304 Year of manufacture 2006 Temperature range +50 °C to +300 °C Temperature constancy ±0.005 °C Djlopvv Dmoinfq Recg Temperature homogeneity

Year of construction: 2007, Condition: good (used), Functionality: fully functional, Good working condition Dcolinfjv Rg Aujq Rsg

Condition: used, exhaust gas analyzer in carrying case kit with printer Dcslevimtksinfq Rjg for oil, gas and solid fuels size of case length - 540 x depth - 400 x height - 110 mm weight approx. 4.5 kg

Year of construction: 2017, Condition: good (used), Functionality: fully functional, machine/vehicle number: 173054, A used climate cabinet from CTS is for sale. Inspection and test run possible in advance. Djlinfsvrffqoq Rscg

Year of construction: 1973, Condition: ready for operation (used), Max. test load range: 750kg, with documentation and accessories. Dcelinfslhtbtjq Rjg

Year of construction: 2023, Condition: like new (used), Device as good as new from 2023. Dcolinfeu T Nh Tsq Reg Price: €6,000 plus indenter, transportation and commissioning

Condition: used, Test panel, test station, measuring station, test device, measuring device, tester for HV, PE, IS measurement ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 PE/IS/HV SCT 42 / 91-3J.3 is used to measure dielectric strength, insulation insulation resistance and the protective conductor voltage drop acc. VDE0113 and IEC regulations according to EN60204, Part 1. Serial no.: 0064016 Year of manufacture 2004 Rated voltage 230 VAC Rated frequency 50 Hz Rated current 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The 90-1V device supplies a highly stable DC voltage with low ripple. One output pole carries high voltage, the other output pole is close to earth and can be to a maximum potential of 300 V. Device no.: 90-7WZ006 Year of manufacture 2000 Mains voltage 230 VAC Mains frequency 50 Hz Rated current 1 A Interference suppression according to VDE 0871 Nominal power 14 Watt Output voltage 0 - 6.0 kV / DC Output current 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial no.: 0097588 Year of manufacture 2009 Rated voltage 230 VAC Rated frequency 49 - 61 Hz Rated current 1 A Number of test points: 5 - Device unit compact on trolley Deliof Axn Aenfq Rscg - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1380 mm total weight: 100 kg good condition Many other ELABO devices under stock numbers 57819, 57820 and 57821

Year of construction: 2006, Condition: ready for operation (used), Without software, documentation available. Delsf I Exyeinfq Rjcg

Year of construction: 2019, Condition: as good as new (ex-display), ZHU250CL-S semi-automatic universal hardness tester - Test load range 0.5 - 250 kg - Innovative force application with closed control loop - for use with an optional manual cross table Djlierpmrgenfq Rocg - For use with ZHµ.HD-S software for automatic indentation measurement and progression generation - Includes a flat test table with ø70mm - For Vickers, Knoop, Brinell, Rockwell and Superficial Rockwell - Brinell tests - HBW 1/1 to HBW 5/250 - Brinell calibration according to BS EN ISO 6506-2 and ASTM E10 - Rockwell tests - All 30 Rockwell & Superficial scales - Rockwell Calibration to BS EN ISO 6508-2 and ASTM E18 - Vickers tests - HV0.5 to HV100 - Vickers Calibration to BS EN ISO 6507-2 and ASTM E384 - Knoop calibration according to BS EN ISO 4545-2 and ASTM E384 - Data output USB - Automatic test sequence - Motorized turret with 8 positions for up to 4 objectives and 4 indenters - LED illumination with individual setting for each objective The device includes - 1x Rockwell diamond indenter - 1x 1/16 Rockwell ball - 1x 2.5mm Brinell sphere - 1x Vickers diamond pyramid - 4x objectives (5x / 10x / 20x / 40x)

Condition: used, Static frequency inverter Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Make No.: A2K 60229 0001 Rated power 500 kVA Type of current D Mains voltage 380 Volt Input frequency 50 Hz Input current 760 Amp. Type power input 760 Amp. Output voltage 380 Volt Djliohutxzsnfq Recg Output frequency 50 Hz Output current 760 Amp. Type power output 760 Amp. - Control unit GARBE LAHMEYER type AEB 60 Cabinet dimensions (W x H x D) 2250 x 800/900 x 2550 mm Transport dimension (W x H x D) 2430 x 1100 x 2700 mm Weight 1660 kg

Year of construction: 2006, Condition: ready for operation (used), Max. workpiece height: 200mm, max. load: 150kg, length: 1300mm, width: 1274mm, height: 1940mm, weight: 1.1t. Dslsg E Uh Ujinfq Recg

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Dcolinfqjtyia Es Reg

Condition: used, Test panel, test station, measuring station, test device, measuring device, tester for HV, PE, IS measurement ELABO type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure dielectric strength, insulation insulation resistance and the protective conductor voltage drop acc. VDE0113 and IEC regulations in accordance with EN60204, Part 1. Serial no.: 0000045431 Year of manufacture 2003 Rated voltage 230 VAC Rated frequency 50 Hz Rated current 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device supplies a highly stable DC voltage with low ripple. One output pole carries high voltage, the other output pole is close to earth and can be to a maximum potential of 300 V. Serial no.: 0082152 Year of manufacture 2005 Mains voltage 230 VAC Mains frequency 50 Hz Rated current 1 A Interference suppression according to VDE 0871 Rated power 14 Watt Output voltage 0 - 6.0 kV / DC Output current 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage 230 VAC Rated frequency 49 - 61 Hz Rated current 1 A Number of test points: 5 - Device unit compact on trolley Dcjlinfqod Dc Uno Reg - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1460 mm total weight: 100 kg good condition Many other ELABO devices under stock number 57820 and 57821

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Dolinfstyibisq Rocg

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed Dcoleuqgbyoinfq Rog User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: refurbished (used), We are selling this used hardness tester in its current condition. Dslinfstyicasq Rjcg Price on request.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Doliodz Sraenfq Recg Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, We are selling this used hardness tester in its current condition. Dcslinfotyicmjq Rjg Price on request. A general overhaul may be possible, please contact us.

Condition: as good as new (ex-display), Year of construction: 2024, DuraScan 20 G5 micro/small load hardness tester for Vickers, Knoop and Brinell for standard-compliant testing to EN ISO and ASTM - Torsionally rigid cast aluminum base body, granite base plate with vibration-damping feet for main load range 10 g - 62.5 kg (0.098 - 613.16 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically motorized test unit - 12MPix color camera for 3-step zoom - Manually swiveling 3-fold measuring turret - incl. 2 objective and 1 indenter adapter Delinfqjr Ilmys Recg - Motorized linear Z-axis, travel 235 mm - Manual cross slide with analog micrometer spindles, travel 25 x 25 mm - Height adjustment for rapid traverse 20 mm/s - High-performance LED incident light illumination - Capacitive 10" touch display with LED backlight - Integrated PC with Win 10 IoT 64-bit and 128 GB SSD memory - Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 - ecos Workflow Touch basic operating software incl. 1 test method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell - Automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CHD-M for creating manual Chd, Nht, Rht and series measurements with inspection coordinates - ecos CODE for reading and creating QR codes - ecos EXPORT EDITOR for customizing the export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) - ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 28.224,-€ incl. 1 test method. Additional test methods can be activated for an additional charge.

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, DuraVision 200 G5 small load/macro hardness testing machine for Brinell, Rockwell, Vickers and Knoop for standard-compliant testing to EN ISO and ASTM as well as plastics testing to ISO and carbon testing to DIN - Torsionally rigid cast iron base body for main load range 0.3 kg - 250 kg (2.94 N - 2,452.5 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically motor-adjustable test unit - 12MPix color camera for 3-step zoom - Motorized 3-position star turret incl. 1 objective and 1 indenter adapter - Removable clamping jaws with clamping inserts enable unclamped and clamped tests - Motorized Z-axis, travel 500 mm - Test height 500 mm, throat depth 320 mm - Adjustable clamping force 200 kg - 2,000 kg - Height adjustment for rapid traverse 25 mm/s - Support, dimensions (WxD) 370 x 447 mm - Plant table, support diameter 90 mm - Maximum weight of the workpiece 500 kg - High-performance LED incident lighting - Capacitive 10" touch display with LED backlight - Integrated PC with Win 10 IoT 64-bit and 128 GB SSD memory - Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 1x Ethernet - ecos Workflow Touch, intuitive basic operating software incl. 1 test method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell, automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CODE for reading and creating QR codes - ecos EXPORT EDITOR for customizing export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow Touch Dcjlinfqor Ilc Te Rog - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant tests of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 44.984,-€ incl. 1 test method. Additional test methods can be activated for an additional charge.

Condition: used, We are selling this used hardness tester in its current condition. Price on request. Dcsljtyih Njinfq Rog A general overhaul may be possible, please contact us.

Condition: used, We are selling this used hardness tester in its current condition. Dcolinjtyiiyjfq Reg Price on request. A general overhaul may be possible, please contact us.

Condition: used, Year of construction: 1981, We are selling this used hardness tester in its current condition. Dcjlinotyil Iefq Rjg Price on request. A general overhaul may be possible, please contact us.