Condition: excellent (used), Type: ClimeEvent C/340/70/3 Climate test chamber, air-cooled Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm Overall dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Key parameters for temperature testing: Temperature range: -40°C to +180°C Temperature change rate, cooling: 4.0 K/min Hfjdpsxn Swuefx Ab Usr Temperature change rate, heating: 3.2 K/min Key parameters for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 20% to 90% r.h. Temporal temperature deviation (within working space): ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.0 K Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated output: 4.1 kW Rated current: 14.0 A Refrigerants: R449A & R23 Test chamber volume: approx. 335 litres Net weight: approx. 520 kg For your security as the buyer, please note the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in the technical data and specifications reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm Hfedpfx Abeva Hi He Ujr External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: Hjdswycatepfx Ab Uofr L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: good (used), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at the center of the usable test volume: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Temperature change rate: - Heating: 11 K/min - Cooling: 10.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at the center of the usable test volume: ±0.2 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at the center of the usable test volume: ±1 to ±3 % RH Technical Data: - External dimensions (with hinges and door lock): - Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm - External dimensions (without hinges and door lock): - Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm - Internal chamber dimensions: - Height: 950 mm, Width: 1100 mm, Depth: 950 mm - Test chamber volume: approx. 1300 liters Feedthroughs: - The chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. - 1 x R1 NW 125 mm - 1 x L1 NW 50 mm Test Chamber Lighting: - Halogen bulb 24 V, 50 W Electrical specifications: - 3/N/PE AC 400V ±10% 50Hz - Rated power: 34.0 kW - Rated current: 50.0 A - Fuse (to be provided on site): 100 A slow-blow - Max. heat emission to environment: 2.2 kW Permissible Test Specimen Weight: - Total load on grate supports: 100 kg - Chamber floor: 150 kg; Inserted rack: 50 kg Refrigerants: - R 404A / R 23 Weight: 1600 kg Hodpjwynmxsfx Ab Uefr For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold chamber: -65° to 0°C Heating chamber: +50 to 200°C System: Two-zone test by damper switching Temperature fluctuation ±0.5°C Hot chamber: Temperature Heating time: Ambient temp. to +200°C within 15 min. Cooling chamber: Temperature pull-down time: ambient temp. to -70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770(1805) Power supply: 400 V AC 50Hz: 70 A Refrigerant: R449A 5 kg R23 2.0 kg Weight: approx. 1450 kg Year of construction 2018 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Hsdpovgw Uaefx Ab Uefr Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Werth Type: Werth SCOPE- CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z) : 400 x 200 x 200 [mm] Work table with integrated electrical cabinet : 1600 x 950 x 780 [mm] Hjdou Iub Rjpfx Ab Ujfr Max. Weight on table : 20 [kg] Operating conditions, * relative humidity, 40 - 70 [%] * Temperature; 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental dimensions Ball screw drive with servo motor Optical magnification (video) : 0.5X to 5X Optical field (video) : 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball Combinable illumination : diascopic, episcopic ring LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting Control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table by joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data, specifications are reserved!) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Rate of Change: Temperature Deviation Temporarily ± 0.3 to ± 0.8 K Temperature Deviation Spatially ± 0.5 to ± 2.0 K Cooling Rate of Change: 18.0 °C Heating Rate of Change: 17.0 °C Test Chamber Dimensions: Width 580 x Depth 620 x Height 950 mm External Dimensions: Width 870 x Depth 1895 x Height 1775 mm Side Ports: 1 x 60 mm Ø and 2 x 120 mm Ø Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 16 kW Rated current 31 A Refrigerant R452A / R23 Approx. 270 liters Weight: 835 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Hfjdpfxswl Argj Ab Uer 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2022, condition: excellent (used), White Type: T/800/70/10 Water-cooled External dimensions (HxWxD): 2085 x 1415 x 2810mm Test room dimensions (HxWxD): 950 x 1100x 800 mm Volume: 800 liters Minimum temperature: -72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation, at +20 °C: 8000 W Power connection 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Hfjdpfx Absvxrwge Usr Rated current: 57 A Operating hours: approx. 10 (never used) Condition: used Weight 1600 kg Scope of delivery: (See picture) Sold ex location! (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Hfedpfxevzz A Rs Ab Uer Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time Hedswvr H Ujpfx Ab Uofr The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: used, Technical specifications (manufacturer/model type – without guarantee): Peak force: “according to manufacturer specifications” approx. ≈ 10 kN Max. acceleration: “up to approx. 1,000 m/s²” Max. speed: “typically in the range of approx. 1 m/s to a few m/s” Components: - Control cabinet TGA 022/3 - Vibration exciter SW 6507 - Power amplifier TG D 9000-000.00 - Blower Condition: used Scope of delivery: Vibration test system as shown (Subject to change and error in technical data!) Hjdpfx Aoxtdl Ijb Ujfr For further questions, we are happy to answer your call.

Condition: excellent (used), Espec Type: EGN28-6CWL Espec temperature water cooled Temperature test chamber N series Power supply: AC 400 V 3-phase 50/60Hz 38A Temperature range -70 to +180°C Temperature change rate Heating 10 °K/min Cooling 5.5 °K/min Internal dimensions W x H x D in mm 1000 x 1000 x 800 External dimensions W x H x D in mm 1205 x 1920 x 2159 Useful volume 800 liters Refrigerant R-404A Refrigerant R- 508A Weight: approx. 695 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate Hfedpfx Aouzva Ujb Uor 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Hfedpfjwh Ttmsx Ab Ujr We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm Hsdjv Tnd Sspfx Ab Uofr External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Hodjqmn A Njpfx Ab Uefr Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Hodpfeqwim Eox Ab Usfr Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent data logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components and and systems for autonomous driving. These complex, networked technologies provide ever larger amounts of data, which makes and more complex during the development phase. In order to shorten the test drives, reduce their number and still meet the test requirements of all departments, the advantages of an intelligent and powerful data logger data logger such as the GL5300 series come into play. The GL5300 series covers the time-synchronous recording of LIN/ CAN & CAN FD bus systems via FlexRay networks through to Ether- networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 for a further 20 CAN FD channels with SIC transceiver and up to 3 GL5450 for synchronous recording of up to 60 100-base T1 (30 taps) and up to 18 1000-base T1 routes (9 taps). Residual bus simulation Classifier Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FLexray, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive triger and filter conditions) Data transmission via LAN/WLAN, USB and mobile radio Operation via menu control Technical data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 Bit 4 Operating voltage +7 V ... +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA Hjdot R R Uwjpfx Ab Uofr in half-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C... +70 °C Housing: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Trim strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Permissible test item weight Total load of the grate supports 80 kg Hsdpjv Ewy Hefx Ab Usfr Test room floor 80 kg, grate insert 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. Hodswf Dh Nepfx Ab Ujfr The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C without thermal test room touch Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Hedpfx Asvx S Hheb Ujfr Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Hedpjw Udv Rofx Ab Uofr Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Control panel Swivel office chair Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Further questions can gladly be answered by phone.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Hjdpfew S E N Tjx Ab Uefr Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Hfsdew I Rxrjpfx Ab Ujr Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Hedsun Rr Rspfx Ab Uofr Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Hodpeun Rulefx Ab Uofr Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.