Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Iedpfx Ahoklv H Ij Ujik Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Iijdpok Scxmjfx Ah Usk dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Iiedod Sr S Iopfx Ah Usk

Year of construction: 1996, condition: good (used), Here we offer a Voetsch drying oven Waermeschrank Waermeofen. Voetsch NTU 60/60 250°C Nominal temperature: 250°C Isdpfsbqh I Sjx Ah Ujik Supply voltage: 400 V 3 (N) PE AC, 50/60 Hz Interior dimensions: width 600 mm/height 600 mm/depth 600 mm External dimensions: width 1000 mm/height 1675 mm/depth 1300 mm Air circulation blower Type: Voetsch NTU 60/60 Scope of delivery: (see picture) (Changes and errors in the technical data are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between Iedpscnic Defx Ah Ueik between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Weiss temperature chamber Iisdpfep Dun Ajx Ah Ujk Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temperature deviation in time in the center of the chamber ± 0.1 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27,0 kW Rated current 42,02 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 960 kg Type: WT11-1000/70/5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06-06 K111183701 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Ijdpsigg Eqefx Ah Usik Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Isdpfxjhxyg Hj Ah Usik Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) Ijdpfxoiz Tqce Ah Usik (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer electrodynamic vibration unit a RMS. RMS electrodynamic vibration equipment Test Manager SWR 900 Subrack SWE 348 Charge amplifier SWE 366 Charge amplifier SWE 366 PSU SWE 350 Type: Test Manager SWR 900 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax Isdpjdyh E Hofx Ah Ujik

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Iisdehaapfepfx Ah Ujk Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 100 mm Temperature range -70°C to +180°C Iedpfxoqxavao Ah Ueik Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Iedpowl D Aaofx Ah Usik Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Iedpfxsxmhyco Ah Ujik Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Condition: good (used), Vötsch Vötsch Climate Test Chamber, Air Cooled Converted to refrigerant R-452a Specifications for Temperature Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.5 K Spatial tolerance: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5: Heating: 3.2 K/min. Cooling: 3.5 K/min. Specifications for Climate Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.3 K Spatial tolerance: ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Housing dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Electrical connection: Rated voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 4.9 kW Iodpfx Ajxbrkhjh Uoik Rated current: 9 A Refrigerant: R-452a Test chamber volume: approx. 335 liters Weight: approx. 515 kg net Important information for you as a buyer! The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Inner dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Isdpfxsn Arqds Ah Ujik Test chamber volume 500 l Temperature range chamber room temp. up to 50°C Mains supply 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss Here we offer a Weiss emission test chamber. Mini - SHED for Diurnal Loss Measurements Ijdpfxemfny Ie Ah Ueik Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (Usable 1600) mm. Housing dimensions: Width 1760 mm x depth 3100 mm x heights 2790 mm Max. floor load 250 kg Operating range +18 °C ...+45 °C, (at higher temperatures SHED operation is only possible without Tedlar bag) Temperature range +18 °C ...+45 °C Temperature constancy ≤ ±1 K (temporal) Temperature change rate, (heating and cooling) approx. 0.5 K/min., without test material Duct connection (air inlet and outlet) ∅ 80 mm, in chamber rear wall Shut-off valve, gas-tight (air inlet and outlet) ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of shut-off valve Cooling water consumption approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4,1 kW Rated current: 14,0A Weight: approx. 2500 kg type: WT 5,1'/ + 18-45 Condition: used / used Sale ex location Scope of supply: (Only the Weiss emission test chamber WT 5,1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS simulators Iiodpfxjlp Hyts Ah Uek Here we offer a temperature test cabinet. Temperature test chamber water cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 with empty test chamber Average heating time: approx. 3 K/min 8acc. to DIN 50011 part 12) Average cooling time: approx. 3 K/min 8acc. to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x height 530 mm x depth 530 mm Outer dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA power consumption: 12 A Main fuse: 3 x16 A, slow blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2016, condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm Iedpfjgkglxox Ah Uoik and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch climatic chamber Here we offer you a Heraeus Vötsch climatic chamber. Vötsch climatic chamber VCS 7033 water cooled Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min. Cooling 6,5 K/min. Humidity range: 10% to 98% r.H. Temperature deviation temporal ± 0.5 K Temperature deviation time-related ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x depth 1565 mm x height 1840 mm Lateral feedthrough 90mm ∅ approx. 330 L Weight: 600 kg voltage: 3/N/PE AC 400V ±6/-10% 50Hz rated power 9,5 kW Rated current 17 A Ijdpfx Aspz H Hxsh Uoik Refrigerant R404A / R23 Type: VCS 7033 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a RMS vibration vibration exciter SW 3009 with side channel blower SKP49033-01/06Type: SW 3009Condition: used / usedScope of supply: (See picture)(Changes and errors in the technical data, specifications are reserved!)We are happy to answer further questions for you on the phone. Isdped Talgofx Ah Ujik

Condition: excellent (used), Here we offer 1800 a Labinot tempering system TS. Labinot tempering system TS 1800 400V of 3n,50hz, 3 x 35 AT Weight: approx. 920kg Ijded Huqhepfx Ah Usik Type: TS 1800 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Vötsch temperature and climate test chamber Here we offer a Heraeus Vötsch temperature cabinet. Heraeus Vötsch temperature chamber air cooled Test chamber volume 110 liters Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm Outer dimensions: Width 850 mm Depth 1030 mm Height 1640 mm Temperature range - 70°C to +180°C Temperature deviation in time ±0.1 to ±0.5 K Temperature deviation spatial ±0.5 to ±1.5 K Iedpfx Ahjh Agt Sj Uoik Temperature gradient 1 to 3 K Temperature change rate cooling 3.2 K/min Temperature change rate heating 3,5 K/min Refrigerant: R-404 A / R 23 Voltage 1/N/PE AC 230V±10% 50Hz Rated power 1,8 kW Rated current 12 A Type: VT 7011 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 Iijdpfxeigg Euo Ah Uek 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 10 kVA Heating power: 9 kW Nominal temperature: 250°C weight: 300 kg Type: KU 250/09-06-06 K1030852 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eliog Here we offer you a chamber circulating air furnace. Usable space dimensions : Height mm 1250 / Width mm 750 / Depth mm 750 Liters : 703 Outer dimensions : height mm 2050 / width mm 1495 / depth mm 1180 Iiedoiivgnopfx Ah Uok Connected load : 3X400V 50 Hz 10 kVA Heating power: kW Nominal temperature: 250°C weight: 500 kg Type: KU 250 / 12-07-07 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.