Condition: used, Mitutoyo BHN 706 Co-ordinate Measuring Machine with Aberlink 3D Software, Deva Pendant Control, Servo Amplifier, Renishaw PH10T Plus Probe Head, PHC 10-3 Plus Controller, Granite Bed Area 1520mm x 940mm Between Columns including Probes & Clamping. S/No. N92090058 - 9005105102 Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Guodex Ahcpspfx Ab Ujk

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Gedpsx Ekuisfx Ab Ueuk

Condition: excellent (used), Vötsch Model: VT 7012 S2 Water-cooled Two-chamber configuration Hot chamber: Temperature range of hot chamber: +50°C to +220°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range of cold chamber: -74.5°C to +70°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Guedpfxex Hhfhj Ab Ujk Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg Important safety information for buyers: The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: used, optical angel measuring unit. Guodpfxegw Tw Re Ab Uek

Condition: good (used), Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm Godpfx Aex E Rxnjb Ujuk -Weight: 0.3 kg/pc.

Condition: used, Year of construction: 1995, DEA Scirocco - 201310 Slant Bridge Technology Co-ordinate Measuring Machine with LK Metrology Camio CMM Software, Granite Bed Size 2880mm Long, 1360mm Between Column, 11+I2:I1350mm Under Z Axis Carriage, Renishaw PH10MQ Probe Head with Probes LK Joystick Operation. S/No. 00076 (1995) Guedpsx Ag T Hsfx Ab Ujk Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Vötsch Type: VC³ 7018 Vötsch Air-Cooled Climatic Test Chamber Temperature Test: Temperature Range: -70°C to +180°C Temperature Rate: Heating 4 K/min Temperature Rate: Cooling 3 K/min Climatic Test: +10°C to +95°C Humidity Range: 10% to 98% RH F. Temperature deviation over time: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Nominal voltage: 400 V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation 1500 W (at 20+) Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Gsdox Hg Uuspfx Ab Ujuk Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm Gujdpfsvvxvdjx Ab Uok

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: Gjdpfx Asx Hglyob Usuk 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Thermo Scientific Vötsch Type: UT 6420 For sale is a professional laboratory and industrial drying oven / heating cabinet, Thermo Scientific / Vötsch Industrietechnik – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treating materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and materials testing. The stainless steel chamber ensures uniform heat distribution and is designed for continuous operation. Chamber: Stainless steel with insertion racks Gedpfxox Hf Uae Ab Uouk External dimensions (approx.): 170 × 70 × 80 cm (H × W × D) Technical specifications: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight: approx. 200–230 kg Condition: used Scope of delivery: (see photo) (Specifications are subject to change and errors; details are non-binding!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Guedpfxsx Hf A Re Ab Uek Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals Gusdpfex E T Uxjx Ab Uok For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Type: T-40/600 Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of set and actual values Gjdpfjx E Tq Tox Ab Ujuk - Numeric input for set values - Error messages in plain text - RS 232 interface - Free switching channels for user-specific test item control Technical Specifications Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, no radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Power connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 For your safety as a buyer, please note the following procedures are performed on all chambers offered: 1. Functional inspection and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Hot Chamber: Temperature control range of the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: Temperature control range of the cold chamber: -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm Gujdpfx Asx E Tkaeb Uok External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port ∅ 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A / R23 Weight: 1000 kg Important information for your security as a buyer! The following work is carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) Should you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Godpfx Asx Elt Hjb Ueuk Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Type: WKL 64/40 For sale is a professional Weiss climate chamber. Air-cooled -40°C to 180°C with humidity range from 10% to 98% Chamber volume: 64 liters Gjdpfjx Ek Uvsx Ab Uouk Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1,780 mm, Width 760 mm, Depth 800 mm Temperature change rate: Cooling: 5.0 K/min Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity within chamber: ±0.5 K to ±2.0 K Max. heat compensation: 800 W Climate testing Maximum temperature: +95°C Minimum temperature: +10°C Dew point temperature range: 5.5 ... 93.5°C Humidity range: 10 ... 95 % r.h. Humidity stability (steady state, depending on set value): ±1 to ±3 % r.h. Temporal temperature deviation (steady state, depending on set value): ±0.3 K to ±0.5 K Temperature uniformity within chamber (depending on set value): ±0.5 K to ±1.5 K Rated power: 1.8 kW; Rated current: 8.0 A Power supply: 1/N/PE AC 230V ±10% / 50Hz Refrigerant: R-404A, 0.8 kg Weight: 120 kg Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following tasks are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical information subject to change and error!) Should you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: C-40/350 Air-cooled climate test chamber For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 3.5 K/min * Cooling: 4 K/min - Heat compensation: * approx. 3500 W at +20°C * approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Guedpfx Asx Ekupsb Usk The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: - Refrigeration unit: air-cooled, low-noise, fully hermetic, variable power control by electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber: * Floor loading: 150 kg/m² * Shelving grid: stainless steel, support area 620 x 600 mm * Max. load per shelf: 35 kg * Max. total load with maximum shelves: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input for setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test item control Dimensions: - Test chamber volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (value not specified)

Condition: excellent (used), Weiss Type: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 litres –70°C to +180°C – 44 kW – Industrial Unit Water-cooled Gedpfjx Eknpjx Ab Ujuk For sale is a professional temperature chamber from Weiss Umwelttechnik. This unit is engineered for demanding environmental simulation in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. The test chamber offers extremely rapid temperature changes and a large test volume. Technical data: Model: WT11-1300/70/15/S Test chamber volume: 1300 litres Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 15 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95 % rh, +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius when open) Overall height: approx. 2,020 mm Internal dimensions – test area: Inside width: approx. 1,000 mm Inside depth: approx. 1,060 mm Inside height: approx. 1,230 mm Equipment: Test chamber made from stainless steel 1.4301 Viewing window in the door Touch panel control Ports: R1: 125 mm L1: 50 mm Connection for automatic water top-up Chilled water inlet & outlet connections Overflow/condensate connection Safety monitoring & alarm system Ideal for: Automotive / E-Mobility Aerospace Research & Development Electronics testing Materials laboratory / Quality assurance Volume: 1300 litres Weight: approx. 1,900 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional test and replacement of required components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted.) Please feel free to contact us by phone for further questions.

Condition: excellent (used), Year of construction: 2023, Bareiss Bareiss digi test II – DTAA II & DTE II – Shore A Hardness Tester – Year of Manufacture: 2023 For sale is a high-quality Bareiss digi test II hardness testing system, consisting of: - Bareiss DTE II – Electronic Unit Year of manufacture: 2023 - Bareiss DTAA II – Hardness Test Stand Year of manufacture: 2023 - Bareiss Rotofix – Rotary Sample Holder Year of manufacture: 2023 - Bareiss BS 09 – Base Stand Year of manufacture: 2023 Complete, fully modular hardness testing system (digi test II) The device is designed for precise measurement of Shore hardness on elastomers, rubber, silicone, plastics, and soft materials. Measurement is fully automatic, repeatable, and standard-compliant according to DIN ISO 48-4 / ASTM D2240. Condition: - Excellent technical and visual condition - Fully operational - German quality manufacturing Technical Data: Electronic Unit DTE II: - Input: 110–240 V AC / 50–60 Hz - Power consumption: max. 20 VA Hardness Test Stand DTAA II: - Overall dimensions: approx. 60 × 40 × 120 cm - Overall weight: approx. 45–55 kg (granite plate + test stand + table) Condition: used Scope of delivery: (see picture) - Bareiss DTE II electronic unit - Bareiss DTAA II hardness test stand - Granite measurement table Gusdpfsx Ehk Ssx Ab Usk - Metal table - Connection cables (Technical data subject to change and errors excepted!) For further questions, we will gladly assist you by phone.

Condition: excellent (used), Hommel Hommel Tester T1000 Surface Roughness Measuring Instrument – Jenoptik – incl. probe & case Item Description: For sale is a Hommel Tester T1000 by Jenoptik / Hommel-Etamic. The T1000 is a precise portable surface roughness tester that uses a tactile stylus to measure the surface roughness of various workpieces. Measured values such as Ra, Rz, and Rmax are displayed immediately on the screen. An integrated mini-printer additionally allows for direct printout of measurement protocols. The device is suitable for use both in production environments and in laboratories. Technical data: Model: Hommel Tester T1000 Manufacturer: Jenoptik / Hommel-Etamic Measured parameters: Ra, Rz, Rmax, etc. Measuring range: Ra approx. 0.03 – 20 µm Display: LCD screen with direct measurement readout Dimensions: approx. 28 × 20 × 10 cm Power supply: Power adapter 230 V AC → Device 9–12 V DC Weight: Device approx. 1.5 kg, in case approx. 3–4 kg Hommel Tester T1000 External surface roughness probe Two additional stylus probes in cases Power supply Gjdjx Ebuwspfx Ab Uouk Original transport case Connection cable Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, Anton Paar Type: Physica MCR 101 Rheometer Description: Godpfx Abox Eblio Uouk The device is used for rheological characterization of various substances. Both stress and creep tests can be performed. It also allows for measurements in both oscillatory and rotational modes. Various measuring geometries are available for characterizing both low and high viscosity fluids, as well as emulsions and suspensions. Additionally, there is an accessory for DMTA analysis and a measuring cell (bi-cone) for interfacial characterization. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request Guedpfx Absx Eaxbe Uok • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Guedpfxsx Eabpj Ab Usk Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Bareiss Bareiss digi test II Hardness Testing Device – Year of Manufacture 2022 – Shore A/B/0 + Accessories Item Description: For sale is a complete Bareiss digi test II hardness testing system, year of manufacture 2022, in very good condition. The device is designed for precise and automated hardness measurement of elastomers, rubber, and soft plastics according to Shore standards (Shore A / B / 0). The system is fully functional, comes from a laboratory environment, and has only been used rarely. All plates, serial numbers, and manufacturing data are present. Made in Germany. Typical areas of application: - Quality control in industry - Laboratory and material testing - Testing according to DIN EN ISO / ASTM standards - Serial measurements with reproducible results Technical data: Input voltage: 110–240 V AC, 50–60 Hz Power consumption: max. 20 VA Measuring method: Automatic hardness tester according to Shore A/B/0 Origin: Made in Germany Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See picture) - Bareiss digi test II control unit - Motorized test stand / measuring module type DTAA II Gujdpjx D U T Rofx Ab Uek - Rotofix adapter for sample fixation - Original operating manual - Three Bareiss accessory cases including inlays (Subject to changes and errors in technical data and information!) We are happy to answer further questions for you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time Gujdpfx Abox D Abpj Uek • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.