Used other measuring & testing equipment for sale (175)

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Dsdpfjxlub Djx Ag Rokk

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 37022, We offer this as-new Tagarno ZIP Microscope + LCD Monitor, year of manufacture 2021. Manufacturer: Tagarno Model: ZIP Year of manufacture: 2021 Condition: as new Category ID: 689 Type: Microscope + LCD Monitor Professional digital inspection system for quality control and PCB assembly. A high-quality digital microscope, TAGARNO model ZIP, is for sale. This device is ideal for precise inspection, repair, and documentation in electronics manufacturing or precision engineering. Technical details and highlights: * Resolution: Full HD (1080p / 60fps) for sharp, lag-free imaging. * Zoom: 30x optical zoom (plus digital zoom). * Working distance: Large clearance under the camera (approx. 250 mm), ideal for soldering. * Interface: HDMI output for direct monitor connection (no PC required). * Condition: Technically and visually perfect, very low operating hours. Scope of delivery: * TAGARNO ZIP camera head * Original TAGARNO stand / frame (column) * Power supply unit and HDMI cable Several units available / quantity discount possible for bulk purchase. Dkjdpfx Aeym Sulsg Rek If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Dkjdjyluicspfx Ag Rjk Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 0981, For sale: Optical sorter Dimac MCV5 in excellent condition, including external loader and storage hopper. Dkodpfxoyt Sxkj Ag Rek

Condition: like new (used), 7-piece set of thread plug gauges in wooden case Brand: Sartorius Rarely used, therefore in very good condition Dkjdpfsyr N S Eex Ag Rek Sizes: M3, M4, M5, M6, M8, M10, M12 – For GO/NO-GO inspection of internal (nut) threads – GO and NO-GO sides made of wear-resistant gauge steel, aged, hardened, and finely ground – Tolerances and dimensions according to DIN ISO 1502 – GO sides of the thread plug gauges manufactured with wear allowance according to DIN ISO 1502 – Tolerance class 6H (* = tolerance class 5H) Set for metric ISO right-hand threads, DIN 13

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request! Dkedpjw Rdvvofx Ag Rek

Year of construction: 2001, condition: used, Technical details: measuring range X-axis: 150-300 mm measuring range Y-axis: * mm Dksdpfxexxl Sas Ag Rok Table dimensions: * mm measurement range Z =: 450 mm tool diameter: * mm tool taper: * SK compressed air: * bar dimensions: * m machine weight ab.: * kg clamping surface upper angle: * Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer *

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Djdom H Uqkjpfx Ag Rjkk

Condition: excellent (used), Year of construction: 2016, operating hours: 250 h, functionality: fully functional, machine/vehicle number: PN99516, total height: 860 mm, total width: 660 mm, total length: 560 mm, manhole location: front, type of input current: AC, overall weight: 93 kg, input voltage: 230 V, input frequency: 50 Hz, height adjustment type: electric, Equipment: documentation/manual, For sale: Lightly used optical shaft measuring machine from Vici Vision, as the device does not meet our requirements. Suitable for shafts and similar parts up to Ø90x260mm, with an effective measuring range of Ø8x100mm. Original price including accessories was CHF 59,595 / EUR 66,047. Last software update and version: MTL 8.74, date unknown Last calibration: 20.03.2023, certificate available for viewing upon request Equipment: - Vici computer with Windows 11 Pro OEM (without monitor, mouse, or keyboard; solely for demonstration purposes) - User manual, electrical diagram - Operating and maintenance manual, technician's manual - Center clamp with jaws 0.6-0.8 and jaws 0-6, jaws 0.2-0.4, tip for lower tailstock - 6-jaw chuck, collet holder with collets 0.3-1.5 - Screws, 24 mm and 32 mm open-end wrenches Technical data: Djdpfx Ajx S Nc Seg Rokk Model: MTL X10 Measuring range: Ø8 x 100mm Max. workpiece dimensions: Ø90 x 260mm Max. workpiece weight: 3 kg Measuring accuracy for diameter at 20°C: (2+D[mm]/100) µm Measuring accuracy for length at 20°C: (5+L[mm]/100) µm Pixel size: 2 x 2 µm Repeatability diameter at 20°C: 0.2 µm Repeatability length at 20°C: 2 µm Max. vertical traverse speed: 20 mm/s Max. rotational speed: 180°/s Weight (MTL unit): 93 kg Power supply: 230V - 50/60 Hz Dimensions (LxWxH): 560 x 660 x 860 mm Recommended table size (solid steel or granite): 1250 x 750 x 710 mm

Year of construction: 1991, condition: used, Technical details: x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t space requirement of the machine approx.: 2,38x1,45x1,94 m Adjustment- and Measuring Device - measuring range z = 680mm - measuring range x = 500mm Dodpfsu N An Isx Ag Rjkk - pneumatical slide clamping - manual endless fine adjustment - turret rotating table - 220V/; 50/60Hz accessories: - taper 1x SK40 and 2 x SK 45 + chisel holder and adapter - brochure Sold as is. EDP not connected - hard disk and software missing *

Condition: used, Measuring system for radiation measurement. Measurement of radioactivity. The stated price is for both devices together. Inspection is possible by appointment at my warehouse! Shipping via freight forwarder is also possible! Dsdpopcfz Nsfx Ag Rjkk

Condition: good (used), Rotex / Gradex particle size analysis Particle Size Analysis Weight: 1350kg Voltage: 220V Dkjdsxg Rmxopfx Ag Rjk

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Dsdexiyxvopfx Ag Rokk

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Dkodpex A Imzofx Ag Rek Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Year of construction: 2021, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SK01USCY0060, Fully functional 3D scanner. Ideal for reverse engineering. Incl. software dongle. Djdpfoxvxupsx Ag Rokk

Condition: good (used), DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operational turnover, improves operations with integrated queuing and collection system through various innovative features of SM-5500B. Experience true retail solutions offered by DIGI's PC scales. - Linerless printing with integrated automatic cutter - Watermark printing - Speed ID - InfoTag and electronic signage e.Label - Integrated queuing and collection system - Waste management - Interactive screen display Power source 230 V (50/60 Hz.) Operating humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator Display 12.1" Customer display 7 "WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, dimensions (in mm) 385(W) x 507(D) x 148(H) Item condition: used Photo is purely indicative More items - new and used - you will find in our store! Dodpfx Agjk Shm Tj Rjkk International shipping costs on request!

Year of construction: 2020, condition: like new (used), With autom. feed + discharge Workpieces are fed in as bulk material, inspected, bad parts are sorted out and good parts are transferred to containers as bulk material. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - line scan camera (4K), surface inspection parts bunker SKAKO, 71 l volume up to 125 kg storage Dkjdpolpcm Rofx Ag Rek New price: € 230.000,-.

Year of construction: 1998, condition: good (used), Zoller V520B Magnum Setting and Measuring Machine Manufacturer: Zoller Type: V 520 Magnum Year of manufacture: 1998 Dkodeicaxqjpfx Ag Rek Technical specifications: Voltage: 230 V Compressed air: 4-6 bar Weight: 180 kg Under-table weight: 140 kg Maximum tool weight: Manual focusing: max. 1000 N Automatic focusing: max. 200 N Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Hommel Dura measuring plate / control plate made of natural hard stone Hommel Dura measuring plate made of hard stone (granite plate) length: 3000 mm width: 1000 mm thickness: 300 mm 1 x T-slot More measuring plates in other sizes - new and used - you will find in our store! International shipping costs on request! Dkedpfxok Shcuj Ag Rsk

Condition: excellent (used), HYDAC ELECTRONIC, SET, Pressure Transmitter, HMG 2020-000-F + HDA + ETS Sensor Item Condition: Used, in perfect working order. For further technical data, please refer to the attached pictures. Djdpfx Ageib Idpe Rekk

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request! Dkodpfexl A Edex Ag Rok

Condition: good (used), Brüel & Kjaer Integrating Sound Level Meter Type 2239 A Item Condition: Used Last Calibrated: 07/2020 Find more interfaces – new and used – in our shop! International shipping costs on request! Djdpfx Ajicauueg Rokk

Condition: excellent (used), Gram Xtrem Condor S platform scale 3000 kg Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries as well as all other industries where scales come into contact with water, moisture or other corrosive substances. Maximum flexibility: Weighing pallets, drums, loaded transport or hand pallet trucks, trolleys or roll containers. Suitable for weighing standard size truck pallets (1200×1000 mm), large drums, trolleys or wheeled containers. Dsdpfx Agsvtl Ibo Rekk Adjustable feet ensure stability when weighing and optimum force transmission to the load sensors. Suitable for floor installation. Otional: Ramps for loading and unloading weighed goods without special equipment Very low platform height (50 mm) for easy access to the load. Connection to Xtrem PC software for simultaneous recording of weighing values from several scales. Digital connection between platform and indicator minimizes technical problems. Verifiable according to calibration class III Gram K4i indicator - stainless steel with total protection Illuminated LCD display with extremely large digits for remote display of the weight of the object on the scale. The structure is made of stainless steel and the resolution is 30,000 / 60,000 divisions. Features LCD display with large digits (52 mm) Verifiable indicator for legal use Stainless steel housing and IP-65 protection class RS output for connecting printers, screens or a PC Wall, pillar or table mounting Function of the limit values Piece counting function Low battery indicator Max: 3000 kg Min: 20 kg e=1000g Platform scale External dimensions: 1700 x 1500 mm Weighing range: 1500×1500 mm Optional: Ramps for loading and unloading weighed goods without special equipment Weight: 239 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, functionality: unexamined, machine/vehicle number: S/N: 002815GL, 8x Schenck load cells SENSiQ® RTN – 4.7 t – C3 Dsdpfx Agexyi Alj Rjkk Used, good condition – S/N: 002815GL For sale are eight high-quality Schenck load cells of the SENSiQ® RTN type, each with a capacity of 4.7 tons and accuracy class C3. The load cells were removed from a fully operational system and are in good, used condition. They have always been handled with care and professionally dismantled.

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). Dsdjw Rkybepfx Ag Rekk *