Condition: used, Year of construction: 1979, Functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Fpobvm Ihsqvml Rj Esg Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: good (used), Functionality: fully functional, planing width: 250 mm, total length: 1,100 mm, total height: 540 mm, total width: 540 mm, Planer, planer 250 mm Specification: • condition - used • max working width - 250 mm Fsbvm Ihowbpu Ts Eepg • length of tops - 1100 mm • manual setting of tops • 3-knife shaft for traditional knives • start-up 0-1 • culaga dimensions 40 x 6 cm • overall dimensions 110 x 54 x 50 cm (length x width x height) Additional information: • very good technical and visual condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: used, Year of construction: 1994, machine/vehicle number: 516, Capacity 630/250mm 4 irons 7.5KW motor Digital display Electric rise and fall Speed variator 6-20m/min Voltage 380V Fobvmjqv Rx Ss Ih Espg

Condition: excellent (used), For sale is a used Steton C400 jointer with a jointing width of 400 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Jointer width 400 mm - 3-knife spindle (strip knives) - Jointer table length 2280 mm - Max. chip removal 15 mm - Very solid construction Fpebvmjv Tnn Rs Ih Eog The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Jointer, planer, jointer Reference: R-AT0WG

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDED PLASTER MOULDER, 4 TOOL HOLDERS + UNIVERSAL SHAFT 2.50M TABLE & REINFORCED MOTORS Brand: CASADEI Type (Model): MATRIX 4+1 Serial number: 02-84-022 Year: 2002 (Photos taken before servicing & cleaning) MAKING CAPACITIES (thickness x width): 6 to 155 X 25 to 230 mm - 4-sided planer and moulder - Working width 25 to 230 mm - Working height (wood thickness) 6 to 155 mm - Maximum section of finished wood 155 x 230 mm - Minimum working length 480 mm - Adjustable pass grip max 10 mm - Shaft rotation speed 6000 rpm COMPOSITION OF THE PLASTER : - Robust welded frame - Soundproofing and panoramic cover on gas cylinders - Raised control panel, operator face - Steel infeed table 2500 x 250 mm Height from the ground: 880 mm Lateral infeed spring pusher Manual table lubrication unit located after planing 1) Lower horizontal shaft 5.5 kW TERSA tool holder Ø 125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical shafts 1 x 7.5 kW TERSA tool holder Ø 125 x h.165 mm 4) Upper horizontal shaft 7.5 kW TERSA tool holder Ø 125 x h.240 mm - Adjustable pressure shoe at the outlet 5) Universal shaft 7.5 kW Ø 40 x 255 mm 1 horizontal retractable roller presser DRIVE: - Feed with variator: 5 to 25 m/min Drive motor: 1.1 kW (1.5 hp) - 8 independent feed rollers with pneumatic pressure: 2+2 grooved steel then 2+2 rubber coated OTHER CHARACTERISTICS: - CE marking - General power supply: 380 v. Three-phase 50 Hz - Padlockable switch, automatic star-delta starts Front/rear punch stops - Installed power: 37 kW (50 hp) IN 62A - Brake motors - Shaft drive by cardan shafts - Digital indicators (Siko type counters) for precise manual adjustment of each operation - Electric raising and lowering of the beam for thickness adjustment, Raising/lowering motor: 0.37 kW - Axial adjustment of the shafts: Lower horizontal from 0 to 15 mm Upper horizontal from 0 to 25 mm Vertical: 0 to 25 mm - Acceptable tool dimensions: On lower horizontal shaft: Ø 120 to 140 mm To be profiled on vertical shafts: Ø 100 to 180 mm To be profiled on upper horizontal shaft: Ø 100 to 180 mm End mill for surfacing: Ø140x12x40 mm - Recommended pneumatic supply: 7 bars Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G - Suction, upper centralized nozzle: Ø 250 mm Required air speed: 25 m/sec minimum Flow rate: 4500 m3/h - Technical manual included. - Machine equipped with 4 TERSA shafts Dimensions: 4700 x 1700 x h.1800 mm Fobvm Isu Sr Ivjh Eopg We invite you to contact us for the supply of consumables, accessories and/or suction systems.

Condition: used, Kölle type HA 51 surface planer or simply surface planer for smoothing and leveling (surface planing) wood. Incl. jointing unit Hemag. Technical specifications: on demand working width: 450 mm Fpobevnu H Aovm Ih Esg working height: 100 mm (joining)

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, working width: 230 mm, working height: 120 mm, jointer table length: 2,500 mm, number of spindles: 6, 4-sided planer TECHNICAL DETAILS Number of spindles: 6 Sawing unit: horizontal (glazing bead saw) Spindle arrangement: bottom / right / left / right / top / bottom Saw unit power: 2.2 kW Spindle power: 5.5 / 7.5 / 7.5 / 5.5 / 7.5 / 5.5 kW Working width: 20 - 230 mm Working height: 8 - 120 mm Spindle diameter: 40 mm Dressing table length: 2.5 m Febvmoualg Eo Ih Eopg Feed rate: 5 - 24 m/min, 4 kW Waxilite pump: manual Rollers in machine table: 2 pieces, driven

Condition: excellent (used), Working width: 220 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: bottom / right / left / top / bottom Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Electrically adjustable pressure beam Electrically adjustable left spindle Feed speed: 6/22 m/min Year of production: 1993 Machine dimensions: - Length: 4400 mm - Width: 1700 mm - Height: 1250 mm Fpobvm Ihjv E H Dns Eog

Condition: used, Year of construction: 2008, machine/vehicle number: 08880472, Width 510mm Table length 285cm Tree 4 sharpening irons Fpsbvmsrr Hn Se Ih Eeg Tree protector 5.5kw motor Voltage: 380V

Condition: excellent (used), SCM Topset XL four-sided planer Working width 230mm Worm height 140mm Number of spindles 6 Bottom 5.5kw r.p.m Right 5.5kw 6000 r.p.m Left 7.5kw 6000 r.p.m Top 7.5kw 6000r.p.m Top 7.5kw 8300r.p.m Bottom 7.5kw 8300r.p.m Spindles diameter 40mm Pneumatic pressures Fpjbsqvzn Hjvm Ih Ejg Electronic height and working width setting Feed speed 5-40m/min CE certificate

Condition: new, Working width 318 / 295 mm Working height 170 mm Febvm Iju Imn Noh Eopg Motor output 2,25 kW Length of the planing table 1300 mm Number of knives 3 St. Feed speed 5,3 m/min. Dust suction hood 100 mm connected load frequency 400 V machine weight ab. 160 kg Dimensions (L/W/H) 1150 x 530 x 930 mm The planer and thicknesser is delivered almost fully assembled. For thickness planing, the same connection is used for suction as for surface planing used. However, this is placed upwards over the storage table.

Year of construction: 1999, Condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 6, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400m³-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Fsbou Damdovm Ih Espg

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Fpobstp Dfmevm Ih Ejg Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: used, Year of construction: 1991, Working width: 500 mm Planing shaft: Centrolock Number of knives: 4 Planer table length: 2800 mm Fpjbvmovadxrj Ih Ejg Dressing table adjustment: Lever Display of chip removal: Scala Dressing fence angle adjustable: yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm weight: 900 kg

Condition: used, Year of construction: 2012, machine/vehicle number: 12E000017100300, Composition: 7 positions including 1 universal Fpobvm Ijtvxcloh Ejg Capacity 230mm/160mm Chrome table Table lubrication Training rollers in the wet wood table Motor power: M1-M2-M3-M7=5.5kw M4-M5-M6=7.5kw Advance speed from 6 to 30m/min Voltage: 380V Weight: +- 5,400kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 616-257, Weinig Unimat 22A four-sided planer. Machine for short material. It has a grooved table. With automatic left spindle (hydraulic) Fpsbvewapkfem Ih Ejg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, WEINIG Unimat 500 - 5 spindles - planing width max. 230 mm - Planing height max. 120 mm - Feed electronically frequency-controlled 5-30 m/min. - Feed motor 4 KW - 1st spindle bottom 5.5 KW - 2nd spindle right - motor right / left 11 KW - 3. spindle left with electric axis adjustment FORWARD - BACK - 4. spindle top 7.5 KW with electric axle adjustment HIGH-LOW - 5. spindle bottom 5.5 KW - Spindle speed 6,000 rpm. - Spindle diameter D=40 mm - Dressing table 2,000 mm with jointing ruler - Infeed roller in front of 1st lower tool pneumatic, high-low controlled - Lateral pressure roller in front of the left spindle, moving and spring-loaded - Pneumatic pressure roller - Driven rubber roller in the outfeed table - electronic digital displays to 1/100 mm - Manual lubricant pump - Central positions of the lubrication points - GRP safety hood - interior light in the safety hood - Total connection approx. 36 KW 2x radial CNC-controlled adjustment: - Positioning of the spindle in conjunction with the memory function for spindle no. 3 + 4 Memory system: - For saving the setting values of profiles - Spindle axes with electronic double displays Functions: - Save the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are brought into alignment by manually adjusting the spindle - 99 memory locations Febvm Ihstqd Nwe Eopg Dimensions: - Length 3,320 mm (3,620 mm discharge hood) - Width 1,710 mm - Height 1,850 mm Machine technically and optically in very good condition Price: by arrangement Payment: net cash before loading Delivery time: approx. 2 - 3 months All changes, errors in the technical data reserved. No guarantee on printed data. Subject to errors and prior sale.

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. Fjbvowaaq Njm Ih Ejpg 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: new, machine/vehicle number: M1-ADM310G-Spiral, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Fjbvevw Edwsm Ih Ejpg Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Optional accessories: moving device

Condition: used, Year of construction: 2011, machine/vehicle number: 0803078, Capacity 230/150mm 4 positions Chrome table Training rollers in the table Febvervqd Nom Ih Eepg Table lubrication Centralized lubrication Control panel Electronic speed variator Engine brakes Voltage: 380V

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Fsbvswaaqpem Ih Eopg Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: new, The new combined planer and thicknesser FSN by Holzprofi convinces with a solid construction, a strong cast iron table,a grounded surface and a modern handling. The machine is space-saving and very comfortable at changing from planing to thicknessing. The profi aluminium fence is 45° rotable and guided on the transverse side. A mechanical LCD-display guarantees a perfect reading of the thicknessing height. CE conform, Made in EU Spiral cutterblock for cutting insert HM15x15x2,5 mm R95 three row arrangement of the 66 cutting inseres incl. torque key. Technical Data: planing: Working table dimensions: 1800x410 mm max. cutting depth: 5 mm planer shaft diameter: 100 mm cutter knives: 4 thicknessing: Fsbvevrvbpem Ih Ejpg Working table dimensions: 406x700 mm max. cutting depth: 4 mm feed speed: 6m/12m/min motor power: 5 kW S6 400V (4kW S1) weight: 450 kg Accessories optional: mortising unit

Condition: used, Width 500mm Fsbvm Iher Iqius Eopg 2 rollers in the table Manual up and down 7 hp engine 380V

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Fobvm Ihjwaapfs Eepg Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: used, Width 500mm 4 irons Tree protector 5.5hp engine Fpober Iqiqevm Ih Eeg 380V