Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. Cslq Eowb A Hiep A Isrb REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Functionality: unexamined, Type: MTU 396 TC 34D With base frame 7320 kg dead weight 850 kV Engine: MTU Little mileage Regularly serviced Rewired Crelq Ep Ajwffxve Ieb Complete with radiator From foundation

Condition: used, Year of construction: 2018, Functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Cjlq Ep Ajv Uz Efe Ierb Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: ready for operation (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: RAL7033C3, type of input current: three-phase, overall weight: 3,820 kg, frequency: 50 Hz, nominal power (apparent): 1,600 kVA, secondary voltage: 690 V, Equipment: type plate available, Contrary to the total weight of 2,180 kg stated on the nameplate, the actual weight is 3,820 kg. The manufacturer confirmed that this is a nameplate error. Crslq Eou S Sl Eep A Iob 1600 kVA, 30 kV, 690 V, built in 2021

Condition: excellent (used), Low-temperature boiler; Viessmann Paromat-Triplex, with dual-fuel burner RGL 7/1-D; 1750 kW Crjlq Eswg Hnhsp A Isb Type: PF-122

Condition: ready for operation (used), Year of construction: 2004, Two boilers (Wolf and Buderus) and a heat pump (Walter Bösch) are available. 1) Wolf special oil/gas boiler, year of manufacture: 2004, heat output range: 17kW-20kW, max. operating pressure: 3bar, max. flow temperature: 110°C, water capacity: 51l. 2) Buderus S115 U boiler, heat output range: 21kW-23.1kW, operating pressure: 3bar, test pressure: 4.8bar, max. flow temperature: 120°C, water capacity: 50l. 3) Walter Bösch HB 6 LS heat pump, heat output: 16.2kW, compressor output: 4.4kW, operating current: 8.7A, starting current: 30A, refrigerant: R22, refrigerant quantity: approx. 6kg. Documentation available. On-site inspection is possible. Cjlq Epewd Tars A Ijrb

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Cjlq Epjwb Axrs A Iorb Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request!

Condition: repair required (used), Hydropower plant complete Colq Ep Aewcyknj Isrb

Condition: new, -KLU 004- A V4A stainless steel enclosure unit of from Rittal is offers. Celq Ep Aedxq T Dj Ijrb Type: SO / HD 4000.009 Dimensions: P 175 x 250 x 35/21 cm distance to the recess of each side 60cm Distance from the bottom to the opening: 56 cm Distance from the top: 35 cm Please refer to everything else the pictures! Pick up is free of charge, shipping would be possible by forwarding only! You get a proper invoice with expelled VAT when purchasing Interest or questions, please register via the message function! By telephone we are accessible from 8 am-5 pm weekdays only!

Condition: used, Year of construction: 2003, Functionality: fully functional, machine/vehicle number: TA248696-3, total length: 750 mm, total height: 1,950 mm, total width: 1,000 mm, Equipment: type plate available, 2x Alstom switchgear Crolq Eevtqqnjp A Ijb 24kV, 40kA, built in 2003 Additional 36kV switchgear available

Condition: excellent (used), Year of construction: 2014, Description For sale is a working and very well-maintained Weishaupt gas burner, including a gas line (Dungs DN 65). 1. Burner type: WM-G30/1-A Power: 350 - 2800 kW Version: ZM-LN Crelshx Uhwoq Ep A Ijb Year of manufacture: 201$ Connection pressure: 15-500 mbar - Delivery is available upon request - All technical data can be seen in the pictures. Priority sale to dealers, businesses, or exporters. All information is provided without guarantee; errors and prior sale are reserved. The seller assumes no liability for typos or data transmission errors.

Condition: ready for operation (used), Year of construction: 2007, A boiler system consisting of a Baumgartner boiler and a Weishaupt burner is available. 1) Standard boiler Duisburg. 2) Weishaupt RGL50/2-A burner, year of construction: 2007, version: ZM-NR, gas type: N, output min./max.: 600kW/5400kW, connection pressure min./max.: 15mbar/500mbar, heating oil min./max.: 95kg/453kg/h, electrical output: 16.59kW. Total system output: approx. 4000kg/h. Documentation available. On-site inspection is possible. Crjlq Ep Aewd Ta Se Isb

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Crsljwb Amioq Ep A Isb Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 214788/04, overall weight: 5,330 kg, input voltage: 20,000 V, frequency: 50 Hz, nominal power (apparent): 2,000 kVA, nominal voltage: 20,000 V, output voltage: 400 V, Equipment: type plate available, Alstom 2000kVA transformer, used in Enercon E-66 wind turbines. Other transformers of the same type are available. 2000kVA, 20kV, 400V, built in 2003 Crelq Esvtptnjp A Ieb

Condition: excellent (used), Year of construction: 2010, WEISHAUPT WM-G30/2-A gas burner, 4100 kW, with gas train. Power: 450-4100 kW Crslq Epswg Hkcs A Ijb Model: ZM Year of manufacture: 2010

Condition: like new (used), Year of construction: 2010, Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power switchgear: Celenfu Dyeq Ep A Isrb Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s height: 1900 mm width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm busbar: AL 50 x 10 mm Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast resin transformer: Type: Cast resin Upper voltage: 10 kV Undervoltage: 400-230 V Circuit: Dyn5 Year of manufacture: 2010 Weight: 1,8 t The pressure relief of the switchgear is done by a pressure relief room in the lower part of the switchgear panel Documentation: Test report Circuit diagram Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2004, WEISHAUPT G11/1-D gas burner - 4750 kW, with gas train. Power: 900-4750 kW Model: ZMD Crelq Epewg Hg Ro A Iob Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2016, WEISHAUPT WM-G30 gas burner - 3800 kW, with gas train Power: 400-3800 kW Model: ZM-LN Year of manufacture: 2016 Colqowg Hdio Ep A Ijrb

Condition: excellent (used), Year of construction: 2001, For sale is a functioning and very well-maintained gas burner from the brand: Weishaupt Monarch WM G30/2-A 2100 kW with gas train, manufactured in 2001 Weishaupt Monarch WM G10/3-A 1000 kW and 900 kW with gas train Weishaupt WM G20/2-A 1600 kW with gas train Crelqoifk Tlo Ep A Ijb Weishaupt WM-G 10/4-A 1250 kW with gas train Weishaupt WM G30/2-A - Output: 300 - 2150 kW - Connection pressure: 15 - 500 mbar - Version: ZM - Year of manufacture: 2001 - Delivery is available upon request - All technical data can be seen in the pictures Priority sale to dealers, businesses, or exporters. All information is provided without guarantee; errors and prior sale are reserved. The seller assumes no liability for typing and data transmission errors.

Condition: excellent (used), Year of construction: 2013, WEISHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM Cslq Epewgyrto A Isrb - Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/3-A (with gas train) - Power: 125-900 kW Cslq Ep Aewgyp Eo Iorb - Year of manufacture: 2011 - Version: ZM-LN

Condition: excellent (used), Year of construction: 2017, WEISHAUPT WM-G10/A-4; With gas train -Power: 110-1250 kW Cslq Ep Aswgym Dj Iorb - Year of manufacture: 2017 - Version: ZM

Condition: excellent (used), Year of construction: 2012, WEISHAUPT WM-G10/2-A -Version: ZM -Power: 65-630 kW -Year of manufacture: 2012 Colq Ejwgylyjp A Ierb

Condition: excellent (used), Year of construction: 2002, WEISHAUPT G7/1-D, gas burner with gas train. -Power: 250-1550 kW -Version: ZD-LN -Year of manufacture: 2002 Cjlswgykcoq Ep A Ijrb

Condition: excellent (used), Year of construction: 2001, WEISHAUPT L3T-A (top condition) - Power 120-775 kW Cjlowgyifsq Ep A Ijrb - 10-65 kg/h - Year of manufacture: 2001 - Model: D-C