Year of construction: 1997, operating hours: 70 h, Condition: excellent (used), machine/vehicle number: 201382, Size 36 x 52 cm, Cptronic, Alcolor dampening, Autoplate, Blanket wash, Roller wash, Impressions cylinder wash, Powder spray Machine nr: 201382, Impressions 70 million Dslrh Ajhqhbtjptscg

Condition: good (used), Year of construction: 2008, age 2008 1 hand feeding station 18 station gatherer 3693 emergency exit connection to perfect binder book block feeder perfect binder Acoro A7 with 22 clamps milling- and roughening station Hotmelt spine glueing Hotmelt side glueing Dcolevw Rzhjrh Aptog PUR spine glueing gauze station cover feeder 2 nipping station lay down device drying section emergency exit trimmer Zenith S compensating stacker CB-16 shown totalizer: approx. 63 mill. impressions

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Deljv Rbkmsrh Aptecg Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: -digital creation kit -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit -extension feeder 100 cm

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners Dslswf Rnvorh Aptocg I will sell to the company that offers the highest price.

Year of construction: 2019, Condition: like new (used), overall weight: 947 kg, working width: 320 mm, input voltage: 400 V, roll diameter: 330 mm, machine/vehicle number: A7X5023000109, - Printing width: 320 mm - Roll width: 330 mm - Resolution: 1200x1200 dpi x 8bit 1200x3600 dpi On 07.09.2022 - after disassembly and transport to the warehouse, it was checked by the service department, which found no deficiencies, or damage. The whole set consists of an unwinder, printer and rewinder, which allows you to print most self-adhesive media. - Media feeding speed: 19m/min, 13.5m/min, 9.45m/min. - Speed depends on the type of paper - Dimensions: 3869x1480x1138 mm - Weight: 947 kg - Power supply: 400 V/50 Hz Delrh Apep S N Snotecg

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, Uchida table-top folding machine, for 6 standard folds and 3 types of custom folds. Automatic recognition of the inserted paper size and automatic adjustment of the folding pockets. Minimum size: 120 x 210 mm. Maximum size: 330 x 488 mm. Maximum size: 330 x 488 mm. Suitable for paper weights from 52.3 to 160 g/m² (230 g/m² for single fold). For six standard types of folds: single fold, roll fold, Z-fold, double parallel fold, window fold, half Z-fold. Paper suction from above, with double sheet detection. High stack feed table, with a capacity of 800 sheets and automatic height adjustment. Dslrev I Ak Aoh Aptecg Adjustable feed tray with automatically adjusted drive belts and paper ejection rollers, for perfect collection of folded documents. Very user-friendly control panel with counter/counter display on the LCD screen.

Year of construction: 2004, operating hours: 140 h, Condition: like new (used), machine/vehicle number: 627161, Size 53 x 74 cm, CP 2000, Alcolor vario dampening, Technotrans Combistar Beta C, Autoplate, Blanket wash, Roller wash, Impression cylinder wash, Heidelberg Alphatronic 200 powderspray, Perfecting 4-4 or 8-0 Dcolrjfd Ruksh Aptog

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: Dcolrh Aporit H Rjtjg width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Dcelrh Asu Snwmeptjg Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Djljwf Rbierh Aptscg Expected price 15 K euros, but I will consider any reasonable offer

Year of construction: 1983, Condition: good (used), max. size 42 x 42 cm age 1983 Djlrov I D Nmoh Aptecg die cutting machine block thickness up to 2 mm max. 5.000 cycles / h (off-load)

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: SerieNr GBC: UG00832P - SerieNr RENZ: 403600400.5816, working width: 360 mm, input voltage: 230 V, Machines in good condition and functional. See two photos. For more information you can contact us. Dslrjv Imy Ueh Aptocg

Year of construction: 2009, Condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Machine nr: 104/1656 Djlshqhcisrh Aptjcg

Condition: excellent (used), Year of construction: 2021, operating hours: 170 h, Functionality: fully functional, machine/vehicle number: 2282, total length: 3,758 mm, total width: 1,235 mm, total height: 2,170 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 570 kg, Only used for 170 hours of use hasn't been used for the last fifteen months and has been in Dry storage in our print facility. Tetris ovens are specifically designed to dry water- based digital printing inks; their greatest advantage is the high volume of recirculating hot air: this forced convection facilitates and accelerates the evaporation of water-based digital inks, with excellent results in medium-long drying processes. The temperature inside the tunnel is uniform and constant both on the sides and in the center, regulated by a precision thermostat and a long-lasting static relay control system; in this way the temperature never exceeds the set value, avoiding damage even to the most delicate fabrics. The air exchange is calibrated to expel water vapor and promote drying. The circulation of hot air is particularly careful and uses high-performance, low-noise reverse-blade fans. The flow nozzles direct the air onto the product perpendicularly and at high speed. The efficiency of the system is preserved thanks to the presence of filters on each fan. The finely insulated rock wool structure does not alter the temperature of the working environment, allows direct contact without the risk of burns and above all reduces heat dissipation and electricity consumption. The return conveyor belt allows the operator to load and unload products without changing his position; the lower belt works at lower temperatures improving quality and further fixing the ink during the return passage. An independent double belt configuration allows instead to adjust different drying times simultaneously. Dcolrh Apeub Dagstsg

Condition: excellent (used), Year of construction: 2013, Ref: 10910 . 2013 Muller Martini Alegro A7 Line Perfect binding line with book block preparation. Equipped with: 12 station MM 3694 gatherer + hand feed & book block feeder ASAC calliper control ASIR III automatic signature recognition M.M. A461 twin end sheet paster with 2 flat pile feeders Reject delivery 3715 Spiral raceway element 3639 Alegro A7 3030/19 binder with 19 clamps Motion Control Technology Milling and roughening station PUR & EVA spine glue pre-melt tanks Dcjlrhevmhg Ts Apteg PUR & Hotmelt spine glue unit Hotmelt side glue unit Warming cabinet Gauzing unit Drum cover feeder with scoring Nipping and pressing station Lay-down delivery unit to conveyor system M.M. Solit 3673 three-knife-trimmer (2008) ‘Easy Fly’ front cutting device for covers with flaps M.M. CB18 compensating book stacker Including tools & manuals Specification: Spine length: 140 - 480 mm Book width: 100 - 320 mm Book thickness: 1 - 65 mm Speed: 1,200 – 7,000 cycles/hour

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Dcolrh Apjwfr Udjtsg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, 1 x used 72-page web offset printing machine Manufacturer: manroland Model: Lithoman IV Year of manufacture: 2011 Cylinder circumference: 1240mm Cut-off length: 620mm Dolrh Ajvzyu Ejptocg Web width: 2060

Condition: new, Year of construction: 2024, machine/vehicle number: 05004100140, Drying and Burn-in Furnace TRO, Model III For drying racks with max. 50rods, useable size 100x140cm, outer dimensions: approx. 2520mm wide x 1870mm deep x 2300mm high, useable space: approx. 1700x 1350x 1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539 (max. permitted solvent quantity: 110g per charge). Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: 1,000kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Dcslrhsh Tytbs Apteg Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: used, MPS EF 430 Year of Manufacture: 2006 _____ Product Description: • Webwidth: 430mm Dcolrh Apswaafystog • 8 x Flexo Printing Units • Rewinders • Unwinder • Web Path Extension with Heater • Anti-static bar single • Web break control • Corona treatment • Combi Slitter Scissors • Web turner unit including backside reading • Lamination unit • Automatic register control • Cooling roller unit • 8 x UV Dry Sation Air Cooled • Infeed Unit 900 Machine Specifications and Equipment: _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____ Price & Terms:

Condition: used, - no description available - Dcjlrh Apsv N Ntajtog

Condition: good (used), Year of construction: 2005, Ref: 10909. 2005 Muller Martini Diamant 60 + Collibri + Jacketer 60 cycles p/h casing in line with preparation and three knife trimmer. Equipped with: Solema FastBook book block feeder End Sheet pasters M.M. Collibri backgluing machine Transport and drying line RPM 410 Roller pressing machine to; M.M. Merit S three knife trimmer to: M.M. Diamant 60 book line with; - Semi automatic setting - Commander with touchscreen - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Casing-in station - Case pre-stacking conveyor - Case bending station M.M. VBF EP 680L - Semi automatic setting - Pressing station - Left hand infeed M.M. BLSD 650 D Book stacker Accessories: Sigloch LEH-3 Ribbon inserter Kallfass Servo Jet 400/30Hot Foli and Tunnel Dcjlrh Aevmhchopteg M.M. ‘Jack Plus’ Jacketing machine

Year of construction: 2001, Condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Djlrowabbvoh Aptjcg The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Year of construction: 1978, Condition: used, Built in 1978 Cutting width 1.550 mm Feeding height max 165 mm Feeding depth max 1.550 mm Front table length 750 mm Table height 900 mm Equipment • air table • side table right • side table left Dcolrhob Hilnj Aptog • light barrier • optical cutting line indicator • automatic hydraulic knife changing • 2 knives condition: machine is not complete, only for spare parts!

Condition: good (used), Year of construction: 2011, 10 UV Flexo Gymnastics bar Coldfoil corona Dcslrewaadveh Aptjg etc.

Condition: used, Year of construction: 1989, machine/vehicle number: C 1092-D, 457 x 292 mm; 6,000 c/h; Size: max. untrimmed: 457 x 292 mm; Dcjleb Hpqwjrh Aptjg max. trimmed: 445 x 279 mm; min. trimmed: 178 x 102 mm;