Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: SerieNr GBC: UG00832P - SerieNr RENZ: 403600400.5816, working width: 360 mm, input voltage: 230 V, Machines in good condition and functional. See two photos. Djlinvev Imy Usdujkl For more information you can contact us.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, 1 x used 72-page web offset printing machine Manufacturer: manroland Model: Lithoman IV Dkelinvsvzyu Eoduol Year of manufacture: 2011 Cylinder circumference: 1240mm Cut-off length: 620mm Web width: 2060

Condition: new, Year of construction: 2024, machine/vehicle number: 05004100140, Drying and Burn-in Furnace TRO, Model III For drying racks with max. 50rods, useable size 100x140cm, outer dimensions: approx. 2520mm wide x 1870mm deep x 2300mm high, useable space: approx. 1700x 1350x 1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539 (max. permitted solvent quantity: 110g per charge). Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: 1,000kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Delinvdsh Tytbjuokl Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: used, - no description available - Dkolinsv N Ntasvduel

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Dolinswfr Udsvduokl

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm Delinjc Idi Rsvduekl min 260 x 180 mm Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer you an untested ProJet 3D Printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional testing, communication models, rapid manufacturing, rapid tooling and more. With features such as a wide material selection, multiple resolution modes and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Print Modes HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD Mode 298 x 185 x 203 mm UHD Mode 127 x 178 x 152 mm XHD Mode n/a Resolution: HD mode 375 x 375 x 790 DPI (xyz); 32μ layer thickness. UHD mode 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode n/a Accuracy (typical) 0.1 - 0.2 % of part dimension Accuracy depends on build parameters, part geometry, part placement and post-processor settings Email Notification: No Build Materials: Dkelsg I Iv Rjinvdujl VisiJet® EX200 build material Solid material with high durability. VisiJet® SR200 Construction Material Inexpensive multi-purpose material. Available in natural, blue or grey. VisiJet® HR200 construction material Available in blue, specially developed for investment casting applications. Backing material: VisiJet® S100 support material: non-toxic wax material for melting supports without hand application. Power supply: 100-127 VAC, 50/60 Hz, single phase, 15A Dimensions (LxWxH) printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging

Year of construction: 1989, Condition: used, Standard equipment Djlinvebkacgedujkl

Condition: excellent (used), Stratasys 3D Printer Dimension Here we offer you a Stratasys 3D Printer Dimension. Stratasys Dimension 3D Printer Dkelijg Nt Tysnvdusl The Dimension 3D printer is part of the Design Series from Stratasys. Manufacturer: Stratasys Type / Printing Technology: FDM (Fused Deposition Modeling) Build volume: 20.3 x 20.3 x 30.5 cm Printable material / filaments: original ABSplus spools or also other ABS or Hips foreign material Dimensions and weight: 68.6 x 91.4 x 104.1 cm; 127 kg Build platform: plastic; reusable Software / file types / operating systems: CatalystEX / STL / Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista Special feature: ideal for complex 3D models with a resolution of 0.178 mm or even 0.25 mm layer thickness. Type: Dimension Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Year of construction: 1978, Condition: used, Built in 1978 Cutting width 1.550 mm Feeding height max 165 mm Feeding depth max 1.550 mm Front table length 750 mm Table height 900 mm Equipment Dkelsb Hilnoinvduel • air table • side table right • side table left • light barrier • optical cutting line indicator • automatic hydraulic knife changing • 2 knives condition: machine is not complete, only for spare parts!

Condition: excellent (used), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. Deljg S A N Tsinvdujkl With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype, to more closely simulate the intended end product than any other technology. What is unique about the Objet Connex? With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™. It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics. Outstanding productivity The Objet Connex 500 offers: - Multi-material models - no more designing, printing and gluing together separate model elements. - Different parts. Different materials. Same tray - saves time and serves multiple needs at the same time. - Excellent 16 micron high resolution printing accuracy - 600 DPI X & Y resolution - Thin walls

Condition: used, Year of construction: 1989, machine/vehicle number: C 1092-D, 457 x 292 mm; 6,000 c/h; Size: max. untrimmed: 457 x 292 mm; Dkslijb Hpqwsnvduol max. trimmed: 445 x 279 mm; min. trimmed: 178 x 102 mm;

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data, specifications are reserved!) Djlisu Ebpcsnvduskl We will be happy to answer any further questions you may have over the phone.

Condition: used, Set of dual setups on rolling stand. Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Dkslinvdjc Skirsusl Stainless steel casing Stand mounted with casters Additional Details Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Condition: used, Objet Stratasys Objet30 Prime V3 + cleaning glovebox Technical data: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294× 192× 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material and post-processing method Model materials: Transparent, solid (VeroClear) Solid, opaque, white (VeroWhitePlus) Solid, opaque, blue (VeroBlue) Solid, opaque, black (VeroBlack) Solid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Dkslinjry Uhhjvdujl Type: Objet30 Pro Condition: gebraucht / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax

Year of construction: 1997, Condition: used, Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls Dslinvjb Hppfsduokl • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery conveyor system • conveyor system ca. 20m • connected with three knife trimmer • conveyor belt to trimmer optionales Equipment:--not included-- • - Opticontrol signature image reader

Condition: excellent (used), Stratasys 3D printer Dimensio elite Here we offer you a Stratasys 3D printer Dimensio elite. Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of the Design Series from Stratasys. The Dimension Elite printer is ideal for printing 3D prototypes, and modeling functional components, such as medical devices, mobile electronic equipment or precision instruments. With a simple click on "Print", the CAD file is prepared and the printing process is started. After simply removing the soluble support material, a precise and detailed component is revealed. Manufacturer: Stratasys Type: Professional Material(s): ABS Technology: Melt layering Assembly: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Dkolinvek E H Iuoduel Coating thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm) : - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A in a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A in a dedicated circuit Type: Dimensio elite Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Meyer Press Type AHV-CPL 8050 Delinvdjbq A A Nsuekl Machine number: 697102

Condition: excellent (used), Here we offer an Eos sieve system and unpacking device. Unpacking station: 1.190 mm x 620 mm x 1.500 mm Power: 3/N/PE/400V AC 50/60Hz Connected load: 0,75 kw weight: 280 kg Type: Schinke EOS screening system+unpacking device Condition: used / used Scope of delivery: (see picture) Dslijg S A Rfenvduskl (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: used, Standard equipment Dkelinvdsbkabzoujl

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Delinvsdkp D Hodujkl Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Year of construction: 1991, Condition: used, Standard equipment Dkjlebnggzeinvdujl

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Dolinvdoqzgvhouskl Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Size max 220 x 297 mm Speed max 2.700 c/h Dslinvoc Rgu Hjduekl Equipment • automatic feeder • 4 knives cutting station • edge corner cutting station • delivery

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) Delinsuif Izovduskl + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.